Function of the CD4 and CD8 molecules on human cytotoxic T lymphocytes: regulation of T cell triggering

The function of the T cell differentiation antigens CD4 (Leu-3/T4) and CD8 (Leu-2/T8) on human cytotoxic T lymphocytes (CTL) is presently seen only in conjugate formation between CTL and target cell via class II or class I MHC antigens rather than in the later killing steps. In this study, human CD4+ and CD8+ CTL clones were used to investigate the effects of monoclonal antibodies against these differentiation antigens on nonspecific triggering of cytotoxicity. Cytotoxicity was induced either by antibodies against the CD3 (T3) antigen or by the lectins Con A and PHA. Anti-CD4 or anti-CD8 antibodies specifically inhibited all types of cytotoxicity of CD4+ or CD8+ CTL, respectively, regardless of the specificity of the CTL for class I or class II HLA antigens and regardless of whether target cells expressed class I or class II antigens. These results are incompatible with an exclusive role of the CD4 and CD8 molecules in MHC class recognition and are discussed with respect to a function as negative signal receptors for these molecules on CTL.     

Morphology of isolated triads

The triad is the junctional association of transverse tubule with sarcoplasmic reticulum terminal cisternae. A procedure for the isolation of highly enriched triads from skeletal muscle has been described in the previous paper. In the present study, the structural features of isolated triads have been examined by thin-section, negative-staining, and freeze-fracture electron microscopy. In isolated triads, key features of the structure observed in situ have been retained, including the osmiophilic "feet," junctional structures between the transverse tubule and terminal cisternae. New insight into triad structure is obtained by negative staining, which also enables visualization of feet at the junctional face of the terminal cisternae, whereas smaller surface particles, characteristic of calcium pump protein, are not visualized there. Therefore, the junctional face is different from the remainder of the sarcoplasmic reticulum membrane. Junctional feet as viewed by thin section or negative staining have similar periodicity and extend approximately 100 A from the surface of the membrane. Freeze-fracture of isolated triads reveals blocklike structures associated with the membrane of the terminal cisternae at the junctional face, interjunctional connections between the terminal cisternae and t-tubule, and intragap particles. The intragap particles can be observed to be closely associated with the t-tubule. The structure of isolated triads is susceptible to osmotic and salt perturbation, and examples are given regarding differential effects on transverse tubules and terminal cisternae. Conditions that adversely affect morphology must be considered in experimentation with triads as well as in their preparation and handling.     

Purification of morphologically intact triad structures from skeletal muscle

A procedure has been devised for isolation of triads (t-tubule/sarcoplasmic reticulum (SR) junctional complexes) from rabbit skeletal muscle. The procedure consists of preparation of a heavy microsomal fraction followed by two sequential 90-min sucrose gradient centrifugations to enrich the triads. A pyrophosphate/phosphate/magnesium buffer system was introduced to decrease aggregation in order to achieve effective separation. The preparation time is 12 h. Some differences between purified triads isolated by two variants of this method are noted. The purity of the triad fractions has been estimated by particle counting to be in the vicinity of 50%. There is good retention of morphology and Ca++-loading activity and enrichment in Na+,K+-ATPase and adenylate cyclase. The triads are practically devoid of contractile elements, mitochondria, and free plasmalemma, and low in content of light SR. The method for obtaining enriched triads is reproducible, and sufficient yields are obtained for structural, biochemical, and functional characterization.     

Study of water and oil diffusion in rape seeds with sorption-desorption and NMR techniques.

The sorption and desorption of water in rape seeds was measured. From the sorption isotherm it follows that for water content greater than about 6% the water molecules tend to form clusters. The mutual diffusion coefficient of water into and out of the seeds was determined from the time dependence of sorption and desorption. There is a pronounced hysteresis in the sorption-desorption process, desorption proceeds faster than sorption. The self-diffusion of water (at maximum humidity of the seeds) and oil within the seeds was investigated by the pulsed field gradient NMR. The measurement of oil self-diffusion shows restricted diffusion of the oil within droplets and allows the determination of the droplet radii and their distribution width.     

The use of amphipathic maleimides to study membrane-associated proteins

A series of amphiphilic polymethylenecarboxymaleimides has been synthesized for use as sulfhydryl reagents applicable to membrane proteins. Physical properties of the compounds which are relevant to their proposed mode of action have been determined. By comparing rates of reaction in aqueous and aprotic solvents, the compounds have been shown to react exclusively with the thiolate ion. The effects of the reagents on three membrane-associated proteins are reported, and in two cases a comparative study has been made of the effects on the proteins in the absence of membranes. A mechanism is proposed whereby the reagents are anchored at the lipid/water interface by the negatively charged carboxyl group, thus siting the reactive maleimide in a plane whose depth is defined by the length of the reagent. Supporting evidence for this model is provided by the inability of the reagents to traverse membranes, and variation of their inhibitory potency with chain length when the proteins are embedded in the membrane, but not when extracted into solution. As examples of general use of the reagents to probe sulfhydryl groups in membrane proteins, the reagents have been used to (a) determine the depths in the membrane at which two populations of sulfhydryl groups occur in the mitochondrial phosphate transporter; (b) locate a single sulfhydryl associated with the active site ofD--hydroxybutyrate dehydrogenase in the inner mitochondrial membrane; (c) examine sulfhydryl groups in theD-3-glyceraldehyde phosphate dehydrogenase associated with the human red blood cell membrane.     

Localization of calmodulin binding sites on the ryanodine receptor from skeletal muscle by electron microscopy.

Calmodulin (CaM) is a regulator of the calcium release channel (ryanodine receptor) of the sarcoplasmic reticulum of skeletal and cardiac muscle. The locations where CaM binds on the surface of the skeletal muscle ryanodine receptor were determined by electron microscopy. Wheat germ CaM was labeled specifically at Cys-27 with a maleimide derivative of a 1.4-nm-diameter gold cluster, and the gold-cluster-labeled CaM was bound to the purified ryanodine receptor. The complexes were imaged in the frozen-hydrated state by cryoelectron microscopy with no stains or fixatives present. In the micrographs, gold clusters were frequently observed near the corners of the square-shaped images of the ryanodine receptors. In some images, all four corners of the receptor were occupied by gold clusters. Image averaging allowed the site of CaM binding to be determined in two dimensions with an estimated precision of 4 nm. No changes were apparent in the quaternary structure of the ryanodine receptor upon binding CaM to the resolution attained, about 3 nm. Side views of the ryanodine receptor, in which the receptor is oriented approximately perpendicular to the much more frequent fourfold symmetric views, were occasionally observed, and showed that the CaM binding site is most likely on the surface of the receptor that faces the cytoplasm. We conclude that the CaM binding site is at least 10 nm from the transmembrane channel of the receptor and, consequently, that long-range conformational changes are involved in the modulation of the calcium channel activity of the receptor by CaM.     

Phosphorylation modulates the function of the calcium release channel of sarcoplasmic reticulum from skeletal muscle.

The modulation of the calcium release channel (CRC) by protein kinases and phosphatases was studied. For this purpose, we have developed a microsyringe applicator to achieve sequential and multiple treatments with highly purified kinases and phosphatases applied directly at the bilayer surface. Terminal cisternae vesicles of sarcoplasmic reticulum from rabbit fast twitch skeletal muscle were fused to planar lipid bilayers, and single-channel currents were measured at zero holding potential, at 0.15 microM free Ca2+, +/- 0.5 mM ATP and +/- 2.6 mM free Mg2+. Sequential dephosphorylation and rephosphorylation rendered the CRC sensitive and insensitive to block by Mg2+, respectively. Channel recovery from Mg2+ block was obtained by exogenous protein kinase A (PKA) or by Ca2+/calmodulin-dependent protein kinase II (CalPK II). Somewhat different characteristics were observed with the two kinases, suggesting two different states of phosphorylation. Channel block by Mg2+ was restored by dephosphorylation using protein phosphatase 1 (PPT1). Before application of protein kinases or phosphatases, channels were found to be "dephosphorylated" (inactive) in 60% and "phosphorylated" (active) in 40% of 51 single-channel experiments based on the criterion of sensitivity to block by Mg2+. Thus, these two states were interconvertable by treatment with exogenously added protein kinases and phosphatases. Endogenous Ca2+/calmodulin-dependent protein kinase (end CalPK) had an opposite action to exogenous CalPK II. Previously, dephosphorylated channels using PPT (Mg2+ absent) were blocked in the closed state by action of endogenous CalPK. This block was removed to normal activity by the action of either PPT or by exogenous CalPK II. Our findings are consistent with a physiological role for phosphorylation/dephosphorylation in the modulation of the calcium release channel of sarcoplasmic reticulum from skeletal muscle. A corollary of our studies is that only the phosphorylated channel is active under physiological conditions (mM Mg2+). Our studies suggest that phosphorylation can be at more than one site and, depending on the site, can have different functional consequences on the CRC.     

Decavanadate is responsible for vanadate-induced two-dimensional crystals in sarcoplasmic reticulum

Two-dimensional protein crystals of the calcium pump protein of sarcoplasmic reticulum (SR) from fast skeletal muscle were induced using Na₃VO₃ as first described by Dux and Martonosi. These crystals exhibit repeat rows 11 nm apart which contain discrete units with 7 nm repeats. Four different methods of sample preparation for electron microscopy, i.e., negative staining, freezedrying, freeze-fracturing, and thin-sectioning electron microscopy, each give complimentary repeat units. The SR-membrane crystals exhibit surface structure by the freeze-drying technique and row-like structures on the normally smooth outer face of normal SR. The formation of the membrane crystals is dependent on the pH and concentration of the vanadate. Only conditions favoring the presence of decavanadate yield crystals. At low concentrations and neutral pH, decavanadate is unstable and with time converts to smaller oligomers and the monomer. The presence of membrane crystals was correlated with the life span of the decavanadate. Membrane crystals were obtained in the SR membrane from fast twitch muscle from light and heavy SR, referable to longitudinal and terminal cisternae as well as from reconstituted SR. Canine cardiac SR did not crystallize under these conditions.Abbreviations Tris (tris[hydroxymethyl])aminomethane - TES (N-tris[hydroxymethyl]methyl-2-aminoethanesulfonic acid), 2-(2-hydroxy-1-bis[hydroxymethyl]ethyl)aminoethanesulfonic acid - SR sarcoplasmic reticulum - CPP calcium pump protein Dedicated to the memory of Prof. David E. Green, friend, mentor, and colleague.     

Reversible modification of D-beta-hydroxybutyrate dehydrogenase by diamide

D-beta-Hydroxybutyrate dehydrogenase is a lipid-requiring enzyme with a specific requirement of lecithin for function. The purified enzyme devoid of lipid (apodehydrogenase) is inactive but can be reactivated by forming a complex with phospholipid containing lecithin. We find that, of the six half cysteines present in D-beta-hydroxybutyrate dehydrogenase, only two are in the reduced form and available for modification with N-ethylmaleimide, even after denaturation in sodium dodecyl sulfate. Diamide treatment of either the inactive apodehydrogenase or the active enzyme-phospholipid complex resulted in complete loss of enzymic activity, the apodehydrogenase being assayed after addition of phospholipid. The inactivation by diamide can be reversed by the addition of dithiothreitol with full recovery of activity. Derivatization using N-[14C]ethylmaleimide showed that diamide modified only one sulfhydryl per enzyme monomer. The other sulfhydryl appears not to be essential for function since full activity can be restored after this sulfhydryl had been covalently derivatized with N-ethylmaleimide. Protein cross-linking was not observed after diamide modification of D-beta-hydroxybutyrate dehydrogenase, indicating that a disulfide bridge was not formed between enzyme subunits. The diamide-modified enzyme retains the ability to bind coenzyme, NAD(H), as detected by quenching of the intrinsic fluorescence of the protein. However, resonance energy transfer from protein to bound NADH and enhancement of NADH fluorescence were not observed, indicating that diamide modification of the protein alters the nucleotide binding site.(ABSTRACT TRUNCATED AT 250 WORDS)