Large-scale coexistence and small-scale segregation of key species on rocky shores

Biodiversity is defined by the scales at which organisms coexist. Coexistence at larger spatial scales may be underpinned by segregation at smaller spatial scales or temporal variability in behaviour and/or distribution. Limpets of the genus Patella are keystone grazers controlling the growth of macro-algae on many rocky shores. This study examined the distribution and abundance of P. vulgata and P. ulyssiponensis in relation to habitat and to each other at a range of spatial scales. Limpets were sampled on four shores on each of the east and west coasts of Ireland, in two different transects (10 m apart) at each of three shore heights in winter 2003 and summer 2004. P. vulgata and P. ulyssiponensis coexist around the coast of Ireland, but on shores where they co-occur, the pattern of coexistence begins to break down at the level of shore height: P. ulyssiponensis were more abundant on the low-shore than mid-shore, and P. vulgata were distributed evenly throughout the low and the mid-shore. At the level of habitat (pools vs. open rock), the two species exhibited a high degree of segregation: P. vulgata of all sizes were more common on open rock and P. ulyssiponensis of all sizes were more common in pools. The presence or absence of P. ulyssiponensis had no effect on the distribution of juvenile P. vulgata with respect to pools. Unexpectedly, however, a greater proportion of adult P. vulgata were found in pools at sites where P. ulyssiponensis were present in the pools than at sites where they were absent. The results of this study emphasize the need for multiple-scale analyses of the distribution and abundance of organisms to understand the organisation of natural assemblages. Handling editor: K. Martens     

The bone-muscle ratio of fetal lambs is affected more by maternal nutrition during pregnancy than by maternal size

Bone formation and loss are related to the strain imposed on bone by muscle forces. Bone mineral content (BMC) and lean mass (LM) of fetal lambs was determined at day 140 of pregnancy in 8 groups of ewes, which were of either large or small body size, on either high (ad libitum) or maintenance pasture intake from day 21 of pregnancy, or carrying either singletons or twins. BMC and LM (using DXA scanning) of fetal hindquarters/spine were corrected to leg length. BMC and LM were less in twin than singleton groups (P < 0.001). Large ewes on high intake produced single fetuses with a (group mean) BMC/LM ratio that was higher (P < 0.002) than that in fetuses of large ewes with singletons on maintenance intake or twins on either high or maintenance intakes, the ratios of which were not different. In single fetuses from small ewes on high intake, the BMC/LM ratio was higher than those from small ewes with singletons on maintenance intake or twins on either high or maintenance intakes, the ratios of which were not different. The ratio was not different in singleton fetuses of ewes on high intake, whether they were large or small. Different fetal environments resulted in a given amount of muscle being associated with a higher or lower bone mass. Dietary intake during pregnancy was more important than maternal size in affecting the ratio. We conclude that intrauterine environmental factors may be important in determining bone mass postnatally, and possibly later in life.     

A multimer resolution system contributes to segregational stability of the prototypical staphylococcal conjugative multiresistance plasmid pSK41

The 46-kb plasmid pSK41 is the prototype of a family of staphylococcal conjugative multiresistance plasmids. Sequence analyses have revealed the presence of a putative resolvase gene, res, on pSK41, and identical or related genes carried by other staphylococcal multiresistance plasmids. Carriage of the res region was found to ameliorate the accumulation of multimeric plasmid forms, and recombinant plasmids encoding a wild-type res gene exhibited greater plasmid segregational stability than counterparts carrying a nonfunctional mutant, irrespective of whether the cognate or a heterologous replication system and host was utilized. In vitro DNA-binding studies demonstrated that purified Res protein binds within the intergenic region upstream of the res coding sequence. Six copies of an imperfect 11-bp repeat sequence were identified within DNA sequences protected by Res in DNAseI footprinting studies, in an arrangement that suggests a typical resolution site organization consisting of three subsites.     

Anaerobic co-digestion of mechanically biologically treated municipal waste with primary sewage sludge - a feasibility study

This bench scale study investigated the suitability of MBT material for treatment by anaerobic digestion and the impacts of co-digestion of these wastes with sewage sludge. The results suggest that MBT material is amenable to anaerobic digestion with sewage sludge. The main problems for scale-up are related to the physical composition of the MBT material, the accumulation of heavy metals and other inert contaminants and the impact of both of these factors on final sludge quality. Full-scale trials would be required to assess the long-term impacts of MBT waste on anaerobic digestion, if this form of co-digestion were to be pursued. The material contamination that presents a barrier to the direct recycling of MBT material in land-applications is also a major hurdle in commercial co-digestion. Better quality input material would be likely to result in higher methane yields and fewer restrictions on the utilisation of the product in recycling.     

Can Nep1-like proteins form oligomers?

Nep1-like proteins (NLPs) are a novel family of microbial elicitors of plant necrosis that induce a hypersensitive-like response in dicot plants. The spatial structure and role of these proteins are yet unknown. In a paper published in BMC Plant Biology (2008; 8:50) we have proposed that the core region of Nep1-like proteins (NLPs) belong to the Cupin superfamily. Based on what is known about the Cupin superfamily, in this addendum to the paper we discuss how NLPs could form oligomers.Key words: quaternary structure, necrosis and ethylene inducing proteins, NLPs, MpNEP1, MpNEP2, NPP1, Moniliophthora perniciosa, Phytophthora parasiticaCupins may be organized as monomers, dimers, hexamers and octamers of β-barrel domains.¹ To the best of our knowledge trimers have not been detected yet. The interaction of two monomers building up a dimeric structure is basically performed by three types of interactions: hydrophobic interactions between β-strands in different subunits, salt bridges and hydrogen bonds between β-strands. In cupin dimers, the hydrophobic interactions occur between two βI strands in different subunits (Fig. 1A and B). This strand represents the central axis of rotation of the dimer as one residue in βI interacts with the corresponding residue in the other subunit (Fig. 1B). Therefore, all residues in βI must be hydrophobic, as one residue interacts with the other subunit and the next one in the sequence interacts with the interior of the protein. Charged residues in βI would disrupt such interactions. Most cupin dimers have strong hydrophobic residues such as tryptophan (W), phenylalanine (F) and methionine (M) pointing towards the own subunit (↓), while small hydrophobic residues such as leucine (L), isoleucine (I), and valine (V) point to the other subunit (↑). A particular case is leucine that interacts with other subunits, for instance, βI = liaW (positions 217–220 in Fig. 1B) and βI = LVsw of type I and II NLP consensuses, respectively. Therefore, the pattern of hydropathicity suggests that the side chain orientation is βI = l217 ↑ i218 ↓ a219 ↑ W220 ↓ d221 ↑. However we observe that just after βI there is a charged residue (aspartate D221) which would point outwards disrupting the dimer or at least making it less stable. It is interesting to observe that the requirement for a negatively charged residue at this last position is very high: 96% of all type I NLPs contains an aspartate (D) or glutamate (E) indicating an important role for it, maybe in avoiding dimerization of the NLPs. A second interesting hypothesis is as follows: several cupins are oxygenases, decarboxylases, etc. and use a negatively charged residue, such as aspartate or glutamate as proton donor.¹ Now, if the alternate pattern of side chains of the residues is βI = l217 ↓ i218 ↑ a219 ↓ W220 ↑ d221 ↓, instead of the previous one, then the aspartate or glutamate residue would point to the hydrophobic pocket and would be positioned to interact with the metal ion, as in cupins with enzymatic activity. However, there are no experimental evidences that the NLPs have enzymatic activity.Open in a separate windowFigure 1(A) Three-dimensional structure prediction for type I NLP consensus, (B) Interface between two βI strands in type I NLP consensus. From the left to the right: EF-coil with the conserved residue H162, βC and βH strands (superposed) with the conserved histidines H133 and H135 in βC, H193 and leucine L195 in βH, W220 in βI and W118 in βB. The strands in the right subunit follow the same pattern but rotated.The second type of interaction is salt bridges between charged residues in different subunits. Analyzing all interacting side chains in the 1VJ2 protein (dimer), we verify that the charged side chains of N35 and E57 (numbers in original structure) are only 2.72 Å apart. In the NLPs, this corresponds to N108^36% (Q108^60%) at the border of βB and E138^98%. The negatively charged residue D125 helps to correct the orientation of the subunits in relation to each other avoiding any disorientation. The high conservation level of these residues suggests that NLPs are dimeric structures. However, as we will see next, only hydrophobic and charged interactions are not enough to build a dimer.Garcia et al. (2007)² have used small angle X-ray scattering (SAXS) to show that, in solution, at low concentrations (<2 mg/ml) the two copies of the NLPs of Moniliophthora perniciosa, MpNEP1 and MpNEP2, exist as dimers and monomers, respectively. The same technique showed that at higher concentrations, >5 mg/ml, both proteins exist as dimers, as is the case for PpNPP1.² They also reported, based on electrophoresis analysis, that PpNPP1 and MpNEP1 exist as oligomers and MpNEP2 as monomers.² However, experiments with the PpNPP1 in size exclusion chromatography using myoglobin as size standard suggest that PpNPP1 is a monomer.³ Figure 2 compares MpNEP1, MpNEP2 and PpNPP1, where the most relevant differences in sequence are marked with asterisks (*) and are possibly related to the differences in oligomeric properties between MpNEP1 and PpNPP1 with MpNEP2. These positions are methionine M27 and leucine L35, which occur only in MpNEP2, glycine G250, which occurs only in MpNEP2 and NEP1 (Fusarium oxysporum) and lysine K31, which occurs only MpNEP2, {"type":"entrez-protein","attrs":{"text":"BAB04114","term_id":"10173008"}}BAB04114 (Bacillus halodurans) and {"type":"entrez-protein","attrs":{"text":"AAU23136","term_id":"52003194"}}AAU23136 (Bacillus licheniformis). The other residues are aspartate D28, which occurs 9 times and alanine A37 which occurs 7 times of all investigated NLPs. Thus, the sequence mdHDkiakl at the start of the NLPs seems to explain the monomeric state of MpNEP2, although at higher concentrations they form dimers. Besides the weak hydrophobic interactions, dimeric cupins and bicupins (two β barrels in the same sequence building up a dimeric-like 4d-structure) are stable structures (see Fig. 1 in ref. ⁴). By aggregating the first β-strand in the start domain of one β-barrel to the ABIDG β-sheet of the other β-barrel, composing a big ABIDGY β-sheet (Y is the first β-strand). For instance, using the bicupin 1L3J (oxalate decarboxylase) as template, the low confidence level β-strand at position 26–33 (v in H29D30 avv) in type I NLPs corresponds to the first β-strand. Since this proceeds from both barrels they can build a stable structure (see Fig. 1 in ref. ⁴). The quaternary structure is related to the presence of interaction residues in the BID β-sheet of the cupin structure. These are present in the NLPs and would enable them to form dimers.Open in a separate windowFigure 2Alignment of type I NLP consensus, PpNPP1, MpNEP1 and MpNEP2. Solid line boxes are β-strands, double line boxes are α-helices. The sequence positions marked with asterisks (*) are possibly related to the differences in oligomeric properties between MpNEP1 and PpNPP1 with MpNEP2.     

Increasing habitat complexity on seawalls: Investigating large‐ and small‐scale effects on fish assemblages

The construction of artificial structures in the marine environment is increasing globally. Eco‐engineering aims to mitigate the negative ecological impacts of built infrastructure through designing structures to be multifunctional, benefiting both humans and nature. To date, the focus of eco‐engineering has largely been on benefits for benthic invertebrates and algae. Here, the potential effect of eco‐engineered habitats designed for benthic species on fish was investigated. Eco‐engineered habitats (“flowerpots”) were added to an intertidal seawall in Sydney Harbour, Australia. Responses of fish assemblages to the added habitats were quantified at two spatial scales; large (among seawalls) and small (within a seawall). Data were collected during high tide using cameras attached to the seawall to observe pelagic and benthic fish. At the larger spatial scale, herbivores, planktivores, and invertebrate predators were generally more abundant at the seawall with the added flowerpots, although results were temporally variable. At the smaller spatial scale, certain benthic species were more abundant around flowerpots than at the adjacent control areas of seawall, although there was no general pattern of differences in species density and trophic group abundance of pelagic fish between areas of the seawall with or without added habitats. Although we did not find consistent, statistically significant findings throughout our study, the field of research to improve fish habitat within human‐use constraints is promising and important, although it is in its early stages (it is experimental and requires a lot of trial and error). To advance this field, it is important to document when effects were detected, and when they were not, so that others can refine the designs or scale of habitat enhancements or their study approaches (e.g., sampling protocols).     

Evaluation of the viability and germination of tempisque [<i>Sideroxylon capiri</i> (A.DC.) Pittier Sapotaceae]

The tempisque (Sideroxylon capiri) is a tree native to Mexico used by the rural population for housing construction, poles and hedges, as fuel (wood) and also for fodder and ornamental purposes, among others. It is considered an endangered species. In order to contribute to its preservation and sustainable management, it was considered important to determine the proportion of viable seeds, the loss of viability due to storage period and the germination process by applying pregerminative treatments. We found that freshly collected seeds showed 100% viability, which decreased to 0% after 5 months of storage. According to the cumulative germination significant differences between treatments (p≤0.01) were found. It was observed that seeds can accelerate their time of germination with the previous exposure of 24 h in water at room temperature. The soaking treatment in water for 24 h at room temperature obtained final germination of 55%, while with the control 39% was reached. Soaking in hydrogen peroxide and scarification were the treatments with lower germination percentage (33 and 23%, respectively). To get a higher percentage of germinated seeds in a short time, it is necessary to give a soaking treatment in water for 24 h before sowing.