Tracking the changes in unloaded bone: Morphology and gene expression

Bone formation and growth are controlled by genetic, hormonal and biomechanical factors. In this study, an established rat disuse osteoporosis model, hindlimb-suspension (HLS), was used to relate morphological change and gene expression to altered mechanical load in the underloaded femora and the ostensibly normally loaded humeri of the suspended rats (39 days old at onset; 1, 3, 7 and 14 days suspension). Morphological change was measured by labelling new bone formation with fluorescent agents during the experimental period and subsequent histological analysis of bone sections post-sacrifice. Hindlimb suspension reduced both the total amount of bone present, assessed as cross-sectional area, and the bone formation rate at the mid-diaphysis of the unloaded femora while no significant effect was found in the loaded humeri. In addition, the femora of the suspended animals were found to have a markedly increased circularity as a result of unloading. A sensitive semi-quantitative method of gene expression analysis, involving the creation of SMART cDNA arrays, was successfully implemented. This technique amplified all populations of mRNA to levels where they could be assessed using standard molecular biology protocols. Gene expression patterns of two candidate genes, c-fos and osteocalcin were assessed in periosteal tissue. Altered gene expression patterns were identified and tracked over the suspension period. The altered levels of both candidate genes were found to be consistent with the changes observed in the histological analysis.     

Rhizosphere competence of fluorescent Pseudomonas sp. B24 genetically modified to utilise additional ferric siderophores

Abstract: The ability to utilise additional siderophores may increase the ecological fitness of biocontrol inoculants of Pseudomonas in the rhizosphere. Plasmid pCUP2 carries a copy of the gene pbu A coding for the membrane receptor of ferric pseudobactin M114. Pseudomonas sp. B24Rif containing pCUP2 can utilise ferric pseudobactin of P. fluorescens M114 in addition to its own siderophore. A larger fraction of the culturable resident fluorescent pseudomonads in the rhizosphere of sugarbeet grown in a low-iron sandy loam soil could supply siderophore-complexed iron to B24Rif(pCUP2) rather than to B24Rif. However, B24Rif and B24Rif(pCUP2) were found at similar population levels in the rhizosphere for 21 days after their inoculation on seeds. A total of 25 of 43 isolates of resident fluorescent Pseudomonas unable to cross-feed iron to B24Rif could cross-feed B24Rif(pCUP2) and they were subdivided into seven different strains by arbitrary-primed PCR fingerprinting. The siderophores produced by 11 of them were typed by HPLC and they were similar to pseudobactin M114. However, the ability to utilise ferric pseudobactin M114 did not improve the ecological fitness of B24Rif in the rhizosphere of sugarbeet although a larger fraction of the culturable resident fluorescent pseudomonads could supply pseudobactin M114-complexed iron to B24Rif(pCUP2) than to B24Rif.     

Isolation of a gene (pbsC) required for siderophore biosynthesis in fluorescent Pseudomonas sp. strain M114

An iron-regulated gene, pbsC, required for siderophore production in fluorescent Pseudomonas sp. strain M114 has been identified. A kanamycin-resistance cassette was inserted at specific restriction sites within a 7 kb genomic fragment of M114 DNA and by marker exchange two siderophore-negative mutants, designated M1 and M2, were isolated. The nucleotide sequence of approximately 4 kb of the region flanking the insertion sites was determined and a large open reading frame (ORF) extending for 2409 by was identified. This gene was designated pbsC (pseudobactin synthesis C) and its putative protein product termed PbsC. PbsC was found to be homologous to a family of enzymes involved in the biosynthesis of secondary metabolites, including EntF of Escherichia coli. These enzymes are believed to act via ATP-dependent binding of AMP to their substrate. Several areas of high sequence homology between these proteins and PbsC were observed, including a conserved AMP-binding domain. The expression of pbsC is iron-regulated as revealed when a DNA fragment containing the upstream region was cloned in a promoter probe vector and conjugated into the wild-type strain, M114. The nucleotide sequence upstream of the putative translational start site contains a region homologous to previously defined –16 to –25 sequences of iron-regulated genes but did not contain an iron-box consensus sequence. It was noted that inactivation of the pbsC gene also affected other iron-regulated phenotypes of Pseudomonas M114.     

Easel,a gypsy LTR-retrotransposon in the Salmonidae

Despite the close similarities between retroviruses and the gypsy/Ty3 group of LTR-retrotransposons their host ranges are largely distinct: the retroviruses are found only in vertebrates, whereas the gypsy LTR-retrotransposons are almost exclusively restricted to invertebrates, plants and fungi. Here we report the amplification by PCR, and characterisation, of one of the first LTR-retrotransposons to be discovered in vertebrates - in several members of the piscine family Salmonidae. Phylogenetic analysis of this retroelement, termed easel, indicates that it is probably a phylogeneticaly basal member of the gypsy group of LTR-retrotransposons and occurs in some of the same species from which retroviruses have previously been isolated. Thus some members of the Salmonidae are the first organisms known to harbour both retroviral branch elements and the gypsy LTR-retrotransposon branch elements. This creates an overlap in the host ranges of the two retroelement families.     

Isolation of a gene (pbsC) required for siderophore biosynthesis in fluorescent Pseudomonas sp. strain M114

An iron-regulated gene, pbsC, required for siderophore production in fluorescent Pseudomonas sp. strain M114 has been identified. A kanamycin-resistance cassette was inserted at specific restriction sites within a 7 kb genomic fragment of M114 DNA and by marker exchange two siderophore-negative mutants, designated M1 and M2, were isolated. The nucleotide sequence of approximately 4 kb of the region flanking the insertion sites was determined and a large open reading frame (ORF) extending for 2409 by was identified. This gene was designated pbsC (pseudobactin synthesis C) and its putative protein product termed PbsC. PbsC was found to be homologous to a family of enzymes involved in the biosynthesis of secondary metabolites, including EntF of Escherichia coli. These enzymes are believed to act via ATP-dependent binding of AMP to their substrate. Several areas of high sequence homology between these proteins and PbsC were observed, including a conserved AMP-binding domain. The expression of pbsC is iron-regulated as revealed when a DNA fragment containing the upstream region was cloned in a promoter probe vector and conjugated into the wild-type strain, M114. The nucleotide sequence upstream of the putative translational start site contains a region homologous to previously defined ?16 to ?25 sequences of iron-regulated genes but did not contain an iron-box consensus sequence. It was noted that inactivation of the pbsC gene also affected other iron-regulated phenotypes of Pseudomonas M114.     

Raman spectroscopy predicts the link between claw keratin and bone collagen structure in a rodent model of oestrogen deficiency

Osteoporosis is a common disease characterised by reduced bone mass and an increased risk of fragility fractures. Low bone mineral density is known to significantly increase the risk of osteoporotic fractures, however, the majority of non-traumatic fractures occur in individuals with a bone mineral density too high to be classified as osteoporotic. Therefore, there is an urgent need to investigate aspects of bone health, other than bone mass, that can predict the risk of fracture. Here, we successfully predicted association between bone collagen and nail keratin in relation to bone loss due to oestrogen deficiency using Raman spectroscopy. Raman signal signature successfully discriminated between ovariectomised rats and their sham controls with a high degree of accuracy for the bone (sensitivity 89%, specificity 91%) and claw tissue (sensitivity 89%, specificity 82%). When tested in an independent set of claw samples the classifier gave 92% sensitivity and 85% specificity. Comparison of the spectral changes occurring in the bone tissue with the changes occurring in the keratin showed a number of common features that could be attributed to common changes in the structure of bone collagen and claw keratin. This study established that systemic oestrogen deficiency mediates parallel structural changes in both the claw (primarily keratin) and bone proteins (primarily collagen). This strengthens the hypothesis that nail keratin can act as a surrogate marker of bone protein status where systemic processes induce changes.     

Single-step purification and h.p.l.c. analysis of glutathione transferase 8-8 in rat tissues.

GSSG selectively elutes two GSH transferases from a mixture of rat GSH transferases bound to a GSH-agarose affinity matrix. One is a form of GSH transferase 1-1 and the other is shown to be GSH transferase 8-8. By using tissues that lack this form of GSH transferase 1-1 (e.g. lung), GSH transferase 8-8 may thus be purified from cytosol in a single step. Quantitative analysis of the tissue distribution of GSH transferase 8-8 was obtained by h.p.l.c.     

Delayed P100-Like Latencies in Multiple Sclerosis: A Preliminary Investigation Using Visual Evoked Spread Spectrum Analysis

Conduction along the optic nerve is often slowed in multiple sclerosis (MS). This is typically assessed by measuring the latency of the P100 component of the Visual Evoked Potential (VEP) using electroencephalography. The Visual Evoked Spread Spectrum Analysis (VESPA) method, which involves modulating the contrast of a continuous visual stimulus over time, can produce a visually evoked response analogous to the P100 but with a higher signal-to-noise ratio and potentially higher sensitivity to individual differences in comparison to the VEP. The main objective of the study was to conduct a preliminary investigation into the utility of the VESPA method for probing and monitoring visual dysfunction in multiple sclerosis. The latencies and amplitudes of the P100-like VESPA component were compared between healthy controls and multiple sclerosis patients, and multiple sclerosis subgroups. The P100-like VESPA component activations were examined at baseline and over a 3-year period. The study included 43 multiple sclerosis patients (23 relapsing-remitting MS, 20 secondary-progressive MS) and 42 healthy controls who completed the VESPA at baseline. The follow-up sessions were conducted 12 months after baseline with 24 MS patients (15 relapsing-remitting MS, 9 secondary-progressive MS) and 23 controls, and again at 24 months post-baseline with 19 MS patients (13 relapsing-remitting MS, 6 secondary-progressive MS) and 14 controls. The results showed P100-like VESPA latencies to be delayed in multiple sclerosis compared to healthy controls over the 24-month period. Secondary-progressive MS patients had most pronounced delay in P100-like VESPA latency relative to relapsing-remitting MS and controls. There were no longitudinal P100-like VESPA response differences. These findings suggest that the VESPA method is a reproducible electrophysiological method that may have potential utility in the assessment of visual dysfunction in multiple sclerosis.     

Recurring cluster and operon assembly for Phenylacetate degradation genes

Background  

A large number of theories have been advanced to explain why genes involved in the same biochemical processes are often co-located in genomes. Most of these theories have been dismissed because empirical data do not match the expectations of the models. In this work we test the hypothesis that cluster formation is most likely due to a selective pressure to gradually co-localise protein products and that operon formation is not an inevitable conclusion of the process.