A combined ex/in vivo assay to detect effects of exogenously added factors in neural stem cells

We describe a protocol developed/modified by our group for the ex vivo and in vivo assessment of the response to a soluble factor of murine neural stem cells from the adult sub-ventricular zone (SVZ). The procedure includes several experimental options that can be used either independently or in combination. Potential factor effects on self-renewal, survival and proliferation are assayed by means of neurosphere cultures, with the factor administered directly in vitro to the culture plates (Step 1) or infused in vivo immediately before tissue dissociation (Step 3). We also use bromodeoxiuridine (BrdU) retention to label slowly dividing cells in vivo and subsequently perform two different types of experiments. In one set of experiments, the factor is added to primary cultures of stem cells obtained from the BrdU-pulsed animals and effects are tested on label-retaining cells after immunocytochemistry (Step 2). In another set, prolonged intraventricular infusion of the factor in BrdU-pulsed animals is followed by immunohistochemical analysis of BrdU labeling in the intact SVZ (Step 4). The minimum estimated time for the full combined procedure is 45 d.     

Laboratory evolution of laccase for substrate specificity

A laccase, CotA, from Bacillus subtilis was engineered using a combination of rational and directed evolution approaches. CotA is a generalist, an enzyme with broad specificity, and it was optimized to be a specialist, an enzyme with narrowed specificity. Wild-type CotA oxidizes ABTS (ABTS = diammonium 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) and SGZ (SGZ = 4-hydroxy-3,5-dimethoxy-benzaldehyde azine), and it was engineered for increased specificity for ABTS. Based on the ABTS-bound crystal structure of CotA, 19 amino acids are within 6 Å of ABTS, and they were simultaneously randomized. A mutant was identified that was 132 times more specific for ABTS. Unexpectedly, the variant was found to acquire enhanced thermal stability. The half-life for the heat inactivation (t_1/2) at 80 °C was increased by 62 min for the mutant. Laccases have several applications in biotechnology, which include pulp bleaching, biosensors, bioremediation, and biofuel cells. The substrate specificity of CotA is moldable and the enzyme can be tailored to oxidize a variety of target molecules for specific purposes.     

Development of a transient large strain contact method for biological heart valve simulations

A new 2D method to implement transient contact using Comsol Multiphysics (finite element analysis software that enables multiphysics simulations) is described, which is based on Hertzian contact. This method is compared to the existing (default) contact method that does not enable real transient simulations, but instead performs steady-state solutions where time is a constant. The two types of contact modelling have been applied to simple 2D biological heart valve models, undergoing strains in the region of 10% under 20 kPa pressure (applied over 0.3 s). Both the methods predicted comparable stress patterns, locations of peak stresses, deformations and directions of principal stress. The default contact method predicted slightly greater contact stresses, but spreads over a shorter surface length than the new contact method. The default contact method is useful for contact systems with little transient dependency, due to ease of use. However, where transient conditions are important the new contact method is preferred.     

Identification of land predators of African Penguins Spheniscus demersus through post-mortem examination

The African Penguin Spheniscus demersus is an endangered seabird endemic to southern Africa, and killing sprees by terrestrial predators have been one of the main threats for its mainland colonies. The methods employed to manage predators may differ depending on the species involved, therefore the implementation of strategies to limit the impacts of predation relies on the correct identification of the culprit predator. We report and quantify the lesions seen in African Penguins killed by four species of terrestrial predators: Caracal Caracal caracal (52 kills), Leopard Panthera pardus (27 kills), Domestic Dog Canis lupus familiaris (10 kills), and Cape Grey Mongoose Galerella pulverulenta (4 kills). We discuss patterns of necropsy findings that can be used to identify the predator species involved. Traditional forensic methods are useful tools to direct species-specific management actions for the conservation of the African Penguin and other seabirds so that effective mitigating measures can be deployed quickly to prevent further losses. It should be borne in mind, however, that the age, size and previous hunting experience of the predator are likely to influence the pattern of lesions that will be observed, and not all carcasses will have hallmark lesions or recognisable bite marks.     

Fermentation characterization and flux analysis of recombinant strains of Clostridium acetobutylicum with an inactivated solR gene

The effect of solR inactivation on the metabolism of Clostridium acetobutylicum was examined using fermentation characterization and metabolic flux analysis. The solR-inactivated strain (SolRH) of this study had a higher rate of glucose utilization and produced higher solvent concentrations (by 25%, 14%, and 81%, respectively, for butanol, acetone, and ethanol) compared to the wild type. Strain SolRH(pTAAD), carrying a plasmid-encoded copy of the bifunctional alcohol/aldehyde dehydrogenase gene (aad) used in butanol production, produced even higher concentrations of solvents (by 21%, 45%, and 62%, respectively, for butanol, acetone, and ethanol) than strain SolRH. Clarithromycin used for strain SolRH maintenance during SolRH(pTAAD) fermentations did not alter product formation; however, tetracycline used for pTAAD maintenance resulted in 90% lower solvent production. Journal of Industrial Microbiology & Biotechnology (2001) 27, 322–328. Received 12 September 2000/ Accepted in revised form 21 July 2001     

A high-throughput microscale method to release N-linked oligosaccharides from glycoproteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis

This report describes a convenient method for the rapid and efficient release of N-linked oligosaccharides from low microgram amounts of glycoproteins. A 96-well MultiScreen assay system containing a polyvinylidene difluoride (PVDF) membrane is employed to immobilize glycoproteins for subsequent enzymatic deglycosylation. Recombinant tissue-type plasminogen activator (rt-PA) is used to demonstrate the deglycosylation of 0.1-50 micrograms of a glycoprotein. This method enabled the recovery of a sufficient amount of N-linked oligosaccharides released enzymatically with peptide N-glycosidase F (PNGaseF) from as little as 0.5 microgram rt-PA for subsequent analysis by matrix-assisted laser desorption/ionization time-of-flight (MALDI- TOF) mass spectrometry. The immobilization of rt-PA to the PVDF membrane did not sterically inhibit the PNGaseF-mediated release of oligosaccharides from rt-PA as determined by tryptic mapping experiments. Comparison of the oligosaccharides released from 50 micrograms of rt-PA by either the 96-well plate method or by a standard solution digestion procedure showed no significant differences in the profiles obtained by high-pH anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Both neutral and sialylated oligosaccharide standards spiked into wells were recovered equally as determined by HPAEC-PAD. One advantage of this approach is that reduction and alkylation can be performed on submicrogram amounts of glycoproteins with easy removal of reagents prior to PNGaseF digestion. In addition, this method allows 60 glycoprotein samples to be deglycosylated in 1 day with MALDI-TOF or HPAEC-PAD analysis being performed on the following day.      

Cell volume and plasma membrane osmotic water permeability in epithelial cell layers measured by interferometry.

The development of strategies to measure plasma membrane osmotic water permeability (Pf) in epithelial cells has been motivated by the identification of a family of molecular water channels. A general approach utilizing interferometry to measure cell shape and volume was developed and applied to measure Pf in cell layers. The method is based on the cell volume dependence of optical path length (OPL) for a light beam passing through the cell. The small changes in OPL were measured by interferometry. A mathematical model was developed to relate the interference signal to cell volume changes for cells of arbitrary shape and size. To validate the model, a Mach-Zehnder interference microscope was used to image OPL in an Madin Darby Canine Kidney (MDCK) cell layer and to reconstruct the three-dimensional cell shape (OPL resolution < lambda/25). As predicted by the model, a doubling of cell volume resulted in a change in OPL that was proportional to the difference in refractive indices between water and the extracellular medium. The time course of relative cell volume in response to an osmotic gradient was computed from serial interference images. To measure cell volume without microscopy and image analysis, a Mach-Zehnder interferometer was constructed in which one of two interfering laser beams passed through a flow chamber containing the cell layer. The interference signal in response to an osmotic gradient was analyzed to quantify the time course of relative cell volume. The calculated MDCK cell plasma membrane Pf of 6.1 x 10(-4) cm/s at 24 degrees C agreed with that obtained by interference microscopy and by a total internal reflection fluorescence method. Interferometry was also applied to measure the apical plasma membrane water permeability of intact toad urinary bladder; Pf increased fivefold after forskolin stimulation to 0.04 cm/s at 23 degrees C. These results establish and validate the application of interferometry to quantify cell volume and osmotic water permeability in cell layers.     

Cell volume measured by total internal reflection microfluorimetry: application to water and solute transport in cells transfected with water channel homologs.

Total internal reflection (TIR) microfluorimetry was established as a method to measure continuously the volume of adherent cells and applied to measure membrane permeabilities in cells transfected with water channel homologs. Cytosol was labeled with the membrane-impermeant fluorophore calcein. Fluorescence was excited by the TIR evanescent field in a thin section of cytosol (approximately 150 nm) adjacent to the cell-substrate interface. Because cytosolic fluorophore number per cell remains constant, the TIR fluorescence signal should be inversely related to cell volume. For small volume changes in Sf-9 and LLC-PK1 cells, relative TIR fluorescence was nearly equal to inverse relative cell volume; deviations from the ideal were modeled theoretically. To measure plasma membrane osmotic water permeability, Pf, the time course of osmotically induced cell volume change was inferred from the TIR fluorescence signal. LLC-PK1 cells expressing the CHIP28 water channel had an HgCl2-sensitive, threefold increase in Pf compared to nontransfected cells (Pf = 0.0043 cm/s at 10 degrees C). Solute permeability was measured from the TIR fluorescence time course in response to solute gradients. Glycerol permeability in Sf-9 cells expressing the water channel homolog GLIP was (1.3 +/- 0.2) x 10(-5) cm/s (22 degrees C), greater than that of (0.36 +/- 0.04) x 10(-5) cm/s (n = 4, p < 0.05) for control cells, indicating functional expression of GLIP. Water and urea permeabilities were similar in GLIP-expressing and control cells. The TIR method should be applicable to the study of water and solute permeabilities and cell volume regulation in cells of arbitrary shape and size.