Gene flow across a hybrid zone maintained by a weak heterogametic incompatibility and positive selection of incompatible alleles

Hybridization between incipient species is more likely to produce sterile or inviable F₁ offspring in the heterogametic (XY or ZW) sex than in the homogametic (XX or ZZ) sex, a phenomenon known as Haldane's rule. Population dynamics associated with Haldane's rule may play an important role in early speciation of sexually reproducing organisms. The dynamics of the hybrid zone maintained by incomplete hybrid inferiority (sterility/inviability) in the heterogametic sex (a ‘weak’ Haldane's rule) caused by a Bateson–Dobzhansky–Muller incompatibility was modelled. The influences and interplays of the strengths of incompatibility, dispersal, density‐dependent regulation (DDR) and local adaptation of incompatible alleles in a scenario of short‐range dispersal (the stepping‐stone model) were examined. It was found that a partial heterogametic hybrid incompatibility could efficiently impede gene flow and maintain characteristic clinal noncoincidence and discordance of alleles. Density‐dependent regulation appears to be an important factor affecting hybrid zone dynamics: it can effectively skew the effects of the partial incompatibility and dispersal as measured by effective dispersal, clinal structures and density depression. Unexpectedly, local adaptation of incompatible alleles in the parental populations, which would be critical for the establishment of the incompatibility, exerts little effect on hybrid zone dynamics. These results strongly support the plausibility of the adaptive origin of hybrid incompatibility and ecological speciation: an adaptive mutation, if it confers a marginal fitness advantage in the local population and happens to cause epistatic inferiority in hybrids, could efficiently drive further genetic divergence that may result in the gene becoming an evolutionary hotspot.     

Distribution and diversity of palms in a tropical biodiversity hotspot (Thailand) assessed by species distribution modeling

Species distribution modeling has been widely used to address questions related to ecology, biogeography and species conservation on global and regional scales. Here, we study palms (Arecaceae) in a tropical biodiversity hotspot (Thailand) using species distribution modeling to assess range‐limiting factors and estimate distribution and diversity patterns based on a comprehensive compilation of occurrence records. We focused on palms as a model group due to their key‐stone importance for ecosystem functioning and socio‐economics. Different combinations of climatic, non‐climatic environmental and spatial predictors were used. The most accurate models as indicated by the ‘area under the receiver operating characteristic curve’ (AUC) statistic were those that combined all predictors. The four strongest single predictors of palm species distributions were, in decreasing order of importance, 1) latitude, 2) precipitation of driest quarter, 3) annual precipitation, and 4) minimum temperature of the coldest month, suggesting rainfall patterns and latitudinal spatial constraints as the main range determinants. Overlaying the predicted distributions revealed that potential palm hotspots are situated in the provinces of Satun and Yala in southern Thailand where vast areas remain relatively open to the discovery of new palm records and perhaps even new species.     

Insulation and wiring specificity of BceR‐like response regulators and their target promoters in Bacillus subtilis

BceRS and PsdRS are paralogous two‐component systems in Bacillus subtilis controlling the response to antimicrobial peptides. In the presence of extracellular bacitracin and nisin, respectively, the two response regulators (RRs) bind their target promoters, P_bceA or P_psdA, resulting in a strong up‐regulation of target gene expression and ultimately antibiotic resistance. Despite high sequence similarity between the RRs BceR and PsdR and their known binding sites, no cross‐regulation has been observed between them. We therefore investigated the specificity determinants of P_bceA and P_psdA that ensure the insulation of these two paralogous pathways at the RR–promoter interface. In vivo and in vitro analyses demonstrate that the regulatory regions within these two promoters contain three important elements: in addition to the known (main) binding site, we identified a linker region and a secondary binding site that are crucial for functionality. Initial binding to the high‐affinity, low‐specificity main binding site is a prerequisite for the subsequent highly specific binding of a second RR dimer to the low‐affinity secondary binding site. In addition to this hierarchical cooperative binding, discrimination requires a competition of the two RRs for their respective binding site mediated by only slight differences in binding affinities.     

How do Mediterranean shrub species cope with shade? Ecophysiological response to different light intensities

• Under natural conditions, light exposure for Mediterranean shrubs can be highly variable, especially during cloudy days or under a canopy, and can interfere with other environmental factors such as temperature and water availability.
• With the aim of decoupling the effect of radiation and temperature from water availability, we conducted an experiment where two perennial and three summer semi‐deciduous shrub species were subjected to different levels of irradiation. In order to follow plant responses to light exposure, we measured gas exchange, photosystem II photochemical efficiency, photosynthetic pigments and leaf mass area in spring and summer.
• Results showed that all study species presented a plastic response to different light conditions, and that light‐related traits varied in a coordinated manner. Summer semi‐deciduous species exhibited a more opportunistic response, with higher photosynthesis rates in full sun, but under shade conditions, the two strategies presented similar assimilation rates. Stomatal conductance did not show such a drastic response as photosynthetsis, being related to changes in WUE. Daily cycles of F_v/F_m revealed a slight photoinhibitory response during summer, mainly in perennial species. In all cases photosynthetic pigments adjusted to the radiation level; leaves had lower chlorophyll content, higher pool of xanthophylls and higher proportion of the de‐epoxydaded state of xanthophylls under sun conditions. Lutein content increased in relation to the xanthophyll pool under shade conditions.
• Our results evidenced that radiation is an important driving factor controlling morphological and physiological status of Mediterranean shrub species, independently of water availability. Summer semi‐deciduous species exhibit a set of traits with higher response variability, maximising their photosynthetic assimilation under different sun conditions.

     

Landscape simplification increases vineyard pest outbreaks and insecticide use

Diversifying agricultural landscapes may mitigate biodiversity declines and improve pest management. Yet landscapes are rarely managed to suppress pests, in part because researchers seldom measure key variables related to pest outbreaks and insecticides that drive management decisions. We used a 13‐year government database to analyse landscape effects on European grapevine moth (Lobesia botrana) outbreaks and insecticides across c. 400 Spanish vineyards. At harvest, we found pest outbreaks increased four‐fold in simplified, vineyard‐dominated landscapes compared to complex landscapes in which vineyards are surrounded by semi‐natural habitats. Similarly, insecticide applications doubled in vineyard‐dominated landscapes but declined in vineyards surrounded by shrubland. Importantly, pest population stochasticity would have masked these large effects if numbers of study sites and years were reduced to typical levels in landscape pest‐control studies. Our results suggest increasing landscape complexity may mitigate pest populations and insecticide applications. Habitat conservation represents an economically and environmentally sound approach for achieving sustainable grape production.     

Liquid–liquid extraction of fermentation inhibiting compounds in lignocellulose hydrolysate

Several compounds that are formed or released during hydrolysis of lignocellulosic biomass inhibit the fermentation of the hydrolysate. The use of a liquid extractive agent is suggested as a method for removal of these fermentation inhibitors. The method can be applied before or during the fermentation. For a series of alkanes and alcohols, partition coefficients were measured at low concentrations of the inhibiting compounds furfural, hydroxymethyl furfural, vanillin, syringaldehyde, coniferyl aldehyde, acetic acid, as well as for ethanol as the fermentation product. Carbon dioxide production was measured during fermentation in the presence of each organic solvent to indicate its biocompatibility. The feasibility of extractive fermentation of hydrolysate was investigated by ethanolic glucose fermentation in synthetic medium containing several concentrations of furfural and vanillin and in the presence of decanol, oleyl alcohol and oleic acid. Volumetric ethanol productivity with 6 g/L vanillin in the medium increased twofold with 30% volume oleyl alcohol. Decanol showed interesting extractive properties for most fermentation inhibiting compounds, but it is not suitable for in situ application due to its poor biocompatibility. Biotechnol. Bioeng. 2009;102: 1354–1360. © 2008 Wiley Periodicals, Inc.     

Targeted Exosomes for Drug Delivery: Biomanufacturing,Surface Tagging,and Validation

Exosomes hold great potential to deliver therapeutic reagents for cancer treatment due to its inherent low antigenicity. However, several technical barriers, such as low productivity and ineffective cancer targeting, need to be overcome before wide clinical applications. The present study aims at creating a new biomanufacturing platform of cancer‐targeted exosomes for drug delivery. Specifically, a scalable, robust, high‐yield, cell line based exosome production process is created in a stirred‐tank bioreactor, and an efficient surface tagging technique is developed to generate monoclonal antibody (mAb)‐exosomes. The in vitro characterization using transmission electron microscopy, NanoSight, and western blotting confirm the high quality of exosomes. Flow cytometry and confocal laser scanning microscopy demonstrate that mAb‐exosomes have strong surface binding to cancer cells. Furthermore, to validate the targeted drug delivery efficiency, romidepsin, a histone deacetylase inhibitor, is loaded into mAb‐exosomes. The in vitro anti‐cancer toxicity study shows high cytotoxicity of mAb‐exosome‐romidepsin to cancer cells. Finally, the in vivo study using tumor xenograft animal model validates the cancer targeting specificity, anti‐cancer efficacy, and drug delivery capability of the targeted exosomes. In summary, new techniques enabling targeted exosomes for drug delivery are developed to support large‐scale animal studies and to facilitate the translation from research to clinics.