Reduced Sirtuin1 signalling exacerbates diabetic mice hindlimb ischaemia injury and inhibits the protective effect of a liver X receptor agonist

Diabetes mellitus causes endothelial dysfunction, which further exacerbates peripheral arterial disease (PAD). Improving endothelial function via reducing endothelial oxidative stress (OS) may be a promising therapy for diabetic PAD. Activation of liver X receptor (LXR) inhibits excessive OS and provides protective effects on endothelial cells in diabetic individuals. Therefore, we investigated the effects of LXR agonist treatment on diabetic PAD with a focus on modulating endothelial OS. We used a streptozotocin-induced diabetes mouse model combined with a hindlimb ischaemia (HLI) injury to mimic diabetic PAD, which was followed by LXR agonist treatment. In our study, the LXR agonist T0901317 protected against HLI injury in diabetic mice by attenuating endothelial OS and stimulating angiogenesis. However, a deficiency in endothelial Sirtuin1 (SIRT1) largely inhibited the therapeutic effects of T0901317. Furthermore, we found that the underlying therapeutic mechanisms of T0901317 were related to SIRT1 and non-SIRT1 signalling, and the isoform LXRβ was involved in LXR agonist-elicited SIRT1 regulation. In conclusion, LXR agonist treatment protected against HLI injury in diabetic mice via mitigating endothelial OS and stimulating cellular viability and angiogenesis by LXRβ, which elicited both SIRT1-mediated and non-SIRT1-mediated signalling pathways. Therefore, LXR agonist treatment may be a promising therapeutic strategy for diabetic PAD.     

Endothelial S1pr1 regulates pressure overload‐induced cardiac remodelling through AKT‐eNOS pathway

Cardiac vascular microenvironment is crucial for cardiac remodelling during the process of heart failure. Sphingosine 1‐phosphate (S1P) tightly regulates vascular homeostasis via its receptor, S1pr1. We therefore hypothesize that endothelial S1pr1 might be involved in pathological cardiac remodelling. In this study, heart failure was induced by transverse aortic constriction (TAC) operation. S1pr1 expression is significantly increased in microvascular endothelial cells (ECs) of post‐TAC hearts. Endothelial‐specific deletion of S1pr1 significantly aggravated cardiac dysfunction and deteriorated cardiac hypertrophy and fibrosis in myocardium. In vitro experiments demonstrated that S1P/S1pr1 praxis activated AKT/eNOS signalling pathway, leading to more production of nitric oxide (NO), which is an essential cardiac protective factor. Inhibition of AKT/eNOS pathway reversed the inhibitory effect of EC‐S1pr1‐overexpression on angiotensin II (AngII)‐induced cardiomyocyte (CM) hypertrophy, as well as on TGF‐β‐mediated cardiac fibroblast proliferation and transformation towards myofibroblasts. Finally, pharmacological activation of S1pr1 ameliorated TAC‐induced cardiac hypertrophy and fibrosis, leading to an improvement in cardiac function. Together, our results suggest that EC‐S1pr1 might prevent the development of pressure overload‐induced heart failure via AKT/eNOS pathway, and thus pharmacological activation of S1pr1 or EC‐targeting S1pr1‐AKT‐eNOS pathway could provide a future novel therapy to improve cardiac function during heart failure development.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Boosting Polysulfide Redox Kinetics by Graphene‐Supported Ni Nanoparticles with Carbon Coating

Lithium–sulfur batteries have attracted extensive attention because of their high energy density. However, their application is still impeded by the inherent sluggish kinetics and solubility of intermediate products (i.e., polysulfides) of the sulfur cathode. Herein, graphene‐supported Ni nanoparticles with a carbon coating are fabricated by directly carbonizing a metal–organic framework/graphene oxide composite, which is then dispersed on a commercial glass fiber membrane to form a separator with electrocatalytic activity. In situ analysis and electrochemical investigation demonstrate that this modified separator can effectively suppress the shuttle effect and regulate the catalytic conversion of intercepted polysulfides, which is also confirmed by density functional theory calculations. It is found that Ni–C sites can chemically interact with polysulfides and stabilize the radical S₃^?? through Ni? S bonds to enable fast dynamic equilibrium with S₆^2?, while Ni nanoparticles reduce the oxidation barrier of Li₂S and accelerate ion/electron transport. As a result, the corresponding lithium–sulfur battery shows a high cycle stability (88% capacity retention over 100 cycles) even with a high sulfur mass loading of 8 mg cm^?2 and lean electrolyte (6.25 µ L mg^?1). Surprisingly, benefitting from the improved kinetics, the battery can work well at ?50 °C, which is rarely achieved by conventional Li–S batteries.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Vacancy in Ultrathin 2D Nanomaterials toward Sustainable Energy Application

The unique physicochemical properties of (2D) nanomaterials make them well‐suited for use in sustainable energy applications. Many of these materials can be further improved with vacancy engineering. This review details recent progress in the vacancy engineering of ultrathin 2D nanomaterials. For clarity, it mainly focuses on various ultrathin 2D materials in three categories: X_a&X_aY_b‐, M_aX_b‐, or M_aX_bY_c‐structured materials. Recently developed vacancies in different types of ultrathin 2D materials, as well as their preparation and characterization, are described. Emphasis is placed on the potential electrochemical energy storage and conversion applications of these materials. This review considers the relationship between vacancy properties and material categories of various ultrathin 2D materials in terms of application requirements, preparation, and characterization techniques. The challenges and future outlook of this promising field are summarized.     

Tin Halide Perovskites: Progress and Challenges

The chemical composition engineering of lead halide perovskites via a partial or complete replacement of toxic Pb with tin has been widely reported as a feasible process due to the suitable ionic radius of Sn and its possibility of existing in the +2 state. Interestingly, a complete replacement narrows the bandgap while a partial replacement gives an anomalous phenomenon involving a further narrowing of bandgap relative to the pure Pb and Sn halide perovskite compounds. Unfortunately, the merits of this anomalous behavior have not been properly harnessed. Although promising progress has been made to advance the properties and performance of Sn‐based perovskite systems, their photovoltaic (PV) parameters are still significantly inferior to those of the Pb‐based analogs. This review summarizes the current progress and challenges in the preparation, morphological and photophysical properties of Sn‐based halide perovskites, and how these affect their PV performance. Although it can be argued that the Pb halide perovskite systems may remain the most sought after technology in the field of thin film perovskite PV, prospective research directions are suggested to advance the properties of Sn halide perovskite materials for improved device performance.     

High‐Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi,Sb)2Te3 Matrix

The (Bi,Sb)₂Te₃ (BST) compounds have long been considered as the benchmark of thermoelectric (TE) materials near room temperature especially for refrigeration. However, their unsatisfactory TE performances in wide‐temperature range severely restrict the large‐scale applications for power generation. Here, using a self‐assembly protocol to deliver a homogeneous dispersion of 2D inclusion in matrix, the first evidence is shown that incorporation of MXene (Ti₃C₂T_x) into BST can simultaneously achieve the improved power factor and greatly reduced thermal conductivity. The oxygen‐terminated Ti₃C₂T_x with proper work function leads to highly increased electrical conductivity via hole injection and retained Seebeck coefficient due to the energy barrier scattering. Meanwhile, the alignment of Ti₃C₂T_x with the layered structure significantly suppresses the phonon transport, resulting in higher interfacial thermal resistance. Accordingly, a peak ZT of up to 1.3 and an average ZT value of 1.23 from 300 to 475 K are realized for the 1 vol% Ti₃C₂T_x/BST composite. Combined with the high‐performance composite and rational device design, a record‐high thermoelectric conversion efficiency of up to 7.8% is obtained under a temperature gradient of 237 K. These findings provide a robust and scalable protocol to incorporate MXene as a versatile 2D inclusion for improving the overall performance of TE materials toward high energy‐conversion efficiency.     

加味星蒌承气汤对急性缺血性脑卒中患者神经功能及血脂、血液流变学的影响

目的:探讨加味星蒌承气汤对急性缺血性脑卒中患者神经功能及血脂、血液流变学的影响。方法:选取2017年8月～2019年6月期间我院收治的急性缺血性脑卒中患者96例,将入选患者根据随机数字表法分为对照组(n=48)和研究组(n=48),对照组患者予以常规西医治疗,研究组患者在对照组基础上联合加味星蒌承气汤治疗,对比两组患者疗效、神经功能及血脂、血液流变学情况,记录两组患者治疗期间不良反应情况。结果:研究组治疗8 d后的临床总有效率为91.67%(44/48),显著高于对照组患者的72.92%(35/48)(P0.05)。两组治疗8 d后加拿大神经功能评分量表(CNS)、美国国立卫生研究所卒中量表(NIHSS)评分均下降(P0.05),且研究组低于对照组(P0.05)。两组治疗8 d后总胆固醇(TC)、低密度脂蛋白胆固醇(LDL-C)、甘油三酯(TG)、全血黏度高切、全血黏度低切、血浆黏度、纤维蛋白原均下降(P0.05),且研究组低于对照组(P0.05);高密度脂蛋白胆固醇(HDL-C)升高(P0.05),且研究组高于对照组(P0.05)。两组不良反应发生率比较无明显差异(P0.05)。结论:急性缺血性脑卒中患者采用加味星蒌承气汤治疗,疗效显著,可有效改善患者神经功能及血脂、血液流变学,且安全性较好。