MicroRNA‐29b‐3p suppresses oral squamous cell carcinoma cell migration and invasion via IL32/AKT signalling pathway

Oral squamous cell carcinoma (OSCC) is aggressive accompanied with poor prognosis. We previously isolated the most invasive cells resembling the invasive tumour front by microfluidic technology and explored their differentially expressed microRNAs (miRNAs) in our previous work. Here, we verified the miR‐29b‐3p as a guarder that suppressed migration and invasion of OSCC cells and was down‐regulated in the most invasive cells. Besides that, the invasion suppression role of miR‐29b‐3p was achieved through the IL32/AKT pathway. Thus, miR‐29b‐3p and IL32 might serve as therapeutic targets for blocking the progression and improving the outcome of OSCC.     

Linc01014 regulates gefitinib resistance in oesophagus cancer via EGFR‐PI3K‐AKT‐mTOR signalling pathway

This study aimed to explore the underlying mechanism of linc01014 in oesophagus cancer gefitinib resistance. Gefitinib‐resistant oesophagus squamous cell carcinoma (ESCC gefitinibR) cell lines were constructed by using different gefitinib treatment in FLO‐1, KYAE‐1, TE‐8 and TE‐5 cell lines and confirmed by MTS50 and proliferation assays. Expression of linc01014 was overexpressed/silenced in FLO‐1 cells followed by gefitinib treatment, and then, the apoptosis‐associated markers Bax and Bcl‐2, and PI3KCA in PI3K signalling pathway were determined using Western blotting. MST50 and morphology analyses showed that ESCC gefitinibR cell lines presented obvious gefitinib resistance than their parental ESCC cell lines. ESCC gefitinibR cell lines showed significantly higher proliferation abilities than their parental ESCC cell lines after treating with gefitinib. Overexpression of linc01014 significantly inhibited the apoptosis of FLO‐1 cells induced by gefitinib and silencing linc01014 obviously promoted the apoptosis of FLO‐1 cells induced by gefitinib. Silencing linc01014 could significantly increase the gefitinib chemotherapy sensitivity of oesophagus cancer via PI3K‐AKT‐mTOR signalling pathway.     

Role of leptin in the regulation of food intake in fasted mice

Leptin is well acknowledged as an anorexigenic hormone that plays an important role in feeding control. Hypothalamic GABA system plays a significant role in leptin regulation on feeding and metabolism control. However, the pharmacological relationship of leptin and GABA receptor is still obscure. Therefore, we investigated the effect of leptin or combined with baclofen on the food intake in fasted mice. We detected the changes in hypothalamic c‐Fos expression, hypothalamic TH, POMC and GAD67 expression, plasma insulin, POMC and GABA levels to demonstrate the mechanisms. We found that leptin inhibit fasting‐induced increased food intake and activated hypothalamic neurons. The inhibitory effect on food intake induced by leptin in fasted mice can be reversed by pretreatment with baclofen. Baclofen reversed leptin's inhibition on c‐Fos expression of PAMM in fasted mice. Therefore, these results indicate that leptin might inhibit fasting‐triggered activation of PVN neurons via presynaptic GABA synaptic functions which might be partially blocked by pharmacological activating GABA‐B. Our findings identify the role of leptin in the regulation of food intake.     

High‐Efficiency CsPbI2Br Perovskite Solar Cells with Dopant‐Free Poly(3‐hexylthiophene) Hole Transporting Layers

CsPbI₂Br is emerging as a promising all‐inorganic material for perovskite solar cells (PSCs) due to its more stable lattice structure and moisture resistance compared to CsPbI₃, although its device performance is still much behind this counterpart. Herein, a preannealing process is developed and systematically investigated to achieve high‐quality CsPbI₂Br films by regulating the nucleation and crystallization of perovskite. The preannealing temperature and time are specifically optimized for a dopant‐free poly(3‐hexylthiophene) (P3HT)‐based device to target dopant‐induced drastic performance degradation for spiro‐OMeTAD‐based devices. The resulting P3HT‐based device exhibits comparable power conversion efficiency (PCE) to spiro‐OMeTAD‐based devices but much enhanced ambient stability with over 95% PCE after 1300 h. A diphenylamine derivative is introduced as a buffer layer to improve the energy‐level mismatch between CsPbI₂Br and P3HT. A record‐high PCE of 15.50% for dopant‐free P3HT‐based CsPbI₂Br PSCs is achieved by alleviating the open‐circuit voltage loss with the buffer layer. These results demonstrate that the preannealing processing together with a suitable buffer layer are applicable strategies for developing dopant‐free P3HT PSCs with high efficiency and stability.     

Membrane‐Free Zn/MnO2 Flow Battery for Large‐Scale Energy Storage

The traditional Zn/MnO₂ battery has attracted great interest due to its low cost, high safety, high output voltage, and environmental friendliness. However, it remains a big challenge to achieve long‐term stability, mainly owing to the poor reversibility of the cathode reaction. Different from previous studies where the cathode redox reaction of MnO₂/MnOOH is in solid state with limited reversibility, here a new aqueous rechargeable Zn/MnO₂ flow battery is constructed with dissolution–precipitation reactions in both cathodes (Mn²⁺/MnO₂) and anodes (Zn²⁺/Zn), which allow mixing of anolyte and catholyte into only one electrolyte and remove the requirement for an ion selective membrane for cost reduction. Impressively, this new battery exhibits a high discharge voltage of ≈1.78 V, good rate capability (10C discharge), and excellent cycling stability (1000 cycles without decay) at the areal capacity ranging from 0.5 to 2 mAh cm^‐2. More importantly, this battery can be readily enlarged to a bench scale flow cell of 1.2 Ah with good capacity retention of 89.7% at the 500th cycle, displaying great potential for large‐scale energy storage.     

High‐Temperature Shock Enabled Nanomanufacturing for Energy‐Related Applications

Functional nanomaterials are playing a crucial role in the emerging field of energy‐related devices. Recently, as a novel synthesis method, high‐temperature shock (HTS), which is rapid, low cost, eco‐friendly, universal, scalable, and controllable, has provided a promising option for the rational design and synthesis of various high‐quality nanomaterials. In this report, the HTS technique, including the equipment setup and operating principle, is systematically introduced, and recent progress in the synthesis of nanomaterials for energy storage and conversion applications using this HTS method is summarized. The growth mechanisms of nanoparticles and carbonaceous nanomaterials are thoroughly discussed, followed by the summary of the characteristic advantages of the HTS strategy. A series of nanomaterials prepared by the HTS method, including carbon‐based films, metal nanoparticles and compound nanoparticles, show high performance in the diverse applications of storage energy batteries, highly active catalysts, and smart energy devices. Finally, the future perspectives and directions of HTS in nanomanufacturing for broader applications are presented.     

Comparison of bacterial community structure and function under different petroleum hydrocarbon degradation conditions

Bioprocess and Biosystems Engineering - Bioremediation methods have been successfully applied to the removal of organic pollutants for decades, but the responses of the microbial community to...     

Activation of the bitter taste sensor TRPM5 prevents high salt-induced cardiovascular dysfunction

Science China Life Sciences - High salt intake is a known risk factor of cardiovascular diseases. Our recent study demonstrated that long-term high salt intake impairs transient receptor potential...     

VdNop12, containing two tandem RNA recognition motif domains,is a crucial factor for pathogenicity and cold adaption in Verticillium dahliae

Previous studies have reported the ability of fungi to overwinter in soil or on crop debris under different environmental conditions, but how fungi adapt to chilling is still largely unknown. In this study, we have identified and characterized the RNA binding protein (RBP) (VdNop12) by screening an Agrobacterium tumefaciens-mediated transformation-mediated insertional mutational library of Verticillium dahliae. We determined that this protein was essential to the pathogen for virulence on cotton plants. VdNop12 contains two tandem RNA recognition motif domains, and its orthologs are widely distributed in filamentous fungi. Mutants produced by disruption of VdNop12 showed defects in vegetative growth, conidiation and cell wall integrity. The mutant also showed an increase in sensitivity to low temperature, as compared to the wildtype and complementation strains. Yeast complementation assay showed that VdNop12 could functionally restore the growth phenotype of ΔScNop12 mutant of Saccharomyces cerevisiae at 15°C. We demonstrated that the VdNop12 is localized in the nucleus, and its loss resulted in the downregulated expression of several genes related to cAMP-PKA and MAPK pathways in V. dahliae. Our results demonstrated a crucial role of RBPs in the regulation of morphology, cold adaption, and pathogenic development in V. dahliae.