Immunogenicity and protective efficacy of recombinant iron superoxide dismutase protein from Bordetella pertussis in mice models

Whooping cough (pertussis) is a highly contagious respiratory infection caused by Bordetella pertussis. Although availability of effective pertussis vaccines reportedly decreases the incidence of the disease, B. pertussis circulation in populations has not been eliminated. Thus, it is necessary to find new protein candidates with greater immune protective capacities than the currently available acellular pertussis vaccines. In this study, iron superoxide dismutase (FeSOD) gene (sodB) was cloned, expressed in Escherichia coli and recombinant FeSOD protein thence purified. The recombinant protein (rFeSOD) was formulated with aluminum hydroxide (Alum) or monophosphoryl lipid A (MPLA) and injected intraperitoneally to immunize mice, after which IgG1, IgG2a and IFN‐γ titers were measured to assess humoral and cellular responses, respectively, to these immunizations. The extent of bacterial colonization in lungs of intranasally challenged mice was determined 5, 8 and 14 days post‐challenge. IgG1 and IgG2a responses were significantly stronger in mice that had been immunized with rFeSOD–MPLA than in those that had received rFeSOD‐Alum (P < 0.05). Additionally, IgG2a titers were higher in mice vaccinated with recombinant protein FeSOD (rFeSOD) formulated with MPLA, especially after the second immunization. Immunization with rFeSOD–MPLA also provided a modest, but significant decrease in bacterial counts in lungs of mice (P < 0.05). Antigen specific‐IFN‐γ responses were significantly stronger in the group vaccinated with rFeSOD–MPLA, which could account for the lower bacterial counts. These findings suggest that rFeSOD protein formulated with MPLA has potential as an acellular pertussis vaccine candidate component.     

Experimental design methods for bioengineering applications

Experimental design is a form of process analysis in which certain factors are selected to obtain the desired responses of interest. It may also be used for the determination of the effects of various independent factors on a dependent factor. The bioengineering discipline includes many different areas of scientific interest, and each study area is affected and governed by many different factors. Briefly analyzing the important factors and selecting an experimental design for optimization are very effective tools for the design of any bioprocess under question. This review summarizes experimental design methods that can be used to investigate various factors relating to bioengineering processes. The experimental methods generally used in bioengineering are as follows: full factorial design, fractional factorial design, Plackett–Burman design, Taguchi design, Box–Behnken design and central composite design. These design methods are briefly introduced, and then the application of these design methods to study different bioengineering processes is analyzed.     

Ameliorative Effect of Carvacrol on Cisplatin‐Induced Reproductive Damage in Male Rats

Cisplatin (CP) treatment causes the damage in male reproductive system. Carvacrol (CARV) is an antioxidant that is naturally found in some plants. We aimed to investigate the effect of CARV on CP‐induced reproductive toxicity in male rats. Eighteen adult male Sprague–Dawley rats were used. The control group (n = 6) was treated orally with physiological saline (PS) daily for 14 days and a single intraperitoneal (IP) PS injection on day 10. The CP group (n = 6) was administered with daily oral PS for 14 days and a single IP injection of 10 mg/kg CP on day 10. The CARV + CP group (n = 6) was treated with daily 75 mg/kg oral CARV for 14 days and a single IP injection of 10 mg/kg CP on day 10. CP treatment caused the damage on some spermatological parameters (motility, live sperm rate, and abnormal sperm rate), increased the oxidative stress, and induced testicular degeneration and apoptosis. However, CARV treatment mitigates CP‐induced reproductive toxicity.     

Radionuclides content in grape molasses soil samples from Central Black Sea region of Turkey

The activity concentrations of radionuclides in grape molasses soil samples collected from Zile (Tokat) plain in the Central Black Sea region of Turkey were measured by using gamma spectrometer with a NaI(Tl) detector. Also, the concentrations of ²²²Rn in soil samples and air were estimated essentially taking the activity concentrations of ²²⁶Ra measured in soil samples. Grape molasses soil samples with calcium carbonate content are used for sedimentation for making molasses in this region. The average activity concentrations of ²³²Th, ²²⁶Ra, ⁴⁰K, and ¹³⁷Cs were found as 62 ± 2, 68 ± 3, 479 ± 35, and 8.0 ± 0.3 Bq kg^?1, respectively. The average concentrations of ²²²Rn in soil samples and air were estimated to be 50 kBq m^?3 and 144 Bq m^?3. From the activity concentrations, absorbed gamma dose rate in outdoor air (D), annual effective dose from external exposure (E_E), annual effective dose from inhalation of radon (E_I), and excess lifetime cancer risk (ELCR) were estimated in order to assess radiological risks. The average values of D, E_E, E_I, and ELCR were found to be 90 nGy h^?1, 110 μSv y^?1, 1360 μSv y^?1, and 4 × 10^?4, respectively.     

The role of wing geometric morphometrics in the identification of sandflies within the subgenus Lutzomyia

The Lutzomyia subgenus (Diptera: Psychodidae) includes sibling species with morphologically indistinguishable females. The aims of this study were to analyse variations in the size and shape of wings of species within the Lutzomyia subgenus and to assess whether these analyses might be useful in their identification. Wings (n = 733) of 18 species deposited in Brazilian collections were analysed by geometric morphometrics, using other genera and subgenera as outgroups. Shape variation was summarized in multivariate analyses and differences in wing size among species were tested by analysis of variance. The results showed significant variation in the sizes and shapes of wings of different Lutzomyia species. Two clusters within the Lutzomyia subgenus were distinguished in analyses of both males and females. In Cluster 1 (Lutzomyia ischnacantha, Lutzomyia cavernicola, Lutzomyia almerioi, Lutzomyia forattinii, Lutzomyia renei and Lutzomyia battistinii), scores for correct reclassification were high (females, kappa = 0.91; males, kappa = 0.90), whereas in Cluster 2 (Lutzomyia alencari, Lutzomyia ischyracantha, Lutzomyia cruzi, Lutzomyia longipalpis, Lutzomyia gaminarai and Lutzomyia lichyi), scores for correct reclassification were low (females, kappa = 0.42; males, kappa = 0.48). Wing geometry was useful in the identification of some species of the Lutzomyia subgenus, but did not allow the identification of sibling species such as L. longipalpis and L. cruzi.     

Carbon balance assessment of a Belgian winter wheat crop (Triticum aestivum L.)

The carbon balance of a winter wheat crop in Lonzée, Belgium, was assessed from measurements carried out at different spatial and temporal scales between November 2004 and August 2005. From eddy covariance measurements, the net ecosystem exchange was found to be ?0.63 kg C m^?2 and resulted from the difference between gross primary productivity (GPP) (?1.58 kg C m^?2) and total ecosystem respiration (TER) (0.95 kg C m^?2). The impact of the u_* threshold value on these fluxes was assessed and found to be very small. GPP assessment was partially validated by comparison with an estimation scaled up from leaf scale assimilation measurements. Soil respiration (SR), extrapolated from chamber measurements, was 0.52 kg C m^?2. Net primary productivity, assessed from crop sampling, was ?0.83 kg C m^?2. By combining these fluxes, the autotrophic and heterotrophic components of respiration were deduced. Autotrophic respiration dominated both TER and SR. The evolution of these fluxes was analysed in relation to wheat development.     

Hypertonic Sabouraud Dextrose Agar as a Substrate for Differentiation of Candida dubliniensis

In this study, we aimed to detect the proportion of Candida dubliniensis among yeast strains previously identified as C. albicans by using several phenotypic methods and PCR. For this purpose, we screened 300 strains by using phenotypic tests suggested for the identification of C. dubliniensis in the literature, but we detected high proportion of false-positive reactions. Only two strains (0.6%) were detected as true C. dubliniensis by PCR and API ID 32C methods. Moreover, these two strains gave the expected results with all the phenotypic tests, including modified salt tolerance test for C. dubliniensis. In conclusion, none of the phenotypic methods, except for the modified salt tolerance test, revealed 100% successful results in discrimination of C. albicans and C. dubliniensis species. However, in the tobacco agar test, the rate of false positivity was as low as 0.6%. We suggest that in the case of absence of PCR and other automatized identification systems, these two phenotypic tests can be used in routine laboratories to obtain a presumptive result.     

Ecologically heterogeneous populations of the invasive ant Wasmannia auropunctata within its native and introduced ranges

Abstract 1. The biology of most invasive species in their native geographical areas remains largely unknown. Such studies are, however, crucial in shedding light on the ecological and evolutionary processes underlying biological invasions. 2. The present study focuses on the little fire ant Wasmannia auropunctata, a species native to Central and South America that has been widely introduced and which has become invasive throughout the tropics. We characterise and compare several ecological traits of native populations in French Guiana with those in one of its introduced ranges, New Caledonia. 3. We found ecologically heterogeneous populations of W. auropunctata coexisting in the species’ native geographical area. First, we found populations restricted to naturally perturbed areas (particularly floodplains) within the primary forest, and absent from the surrounding forest areas. These populations were characterised by low nest and worker densities. Second, we found dominant populations in recent anthropogenic areas (e.g. secondary forest or forest edge along road) characterised by high nest and worker densities, and associated with low ant species richness. The local dominance of W. auropunctata in such areas can be due to the displacement of other species (cause) or the filling‐up of empty habitats unsuitable to other ants (effect). With respect to their demographic features and ant species richness, the populations of native anthropogenic habitats were to a large extent similar to the invasive populations introduced into remote areas. 4. The results point to the need for greater research efforts to better understand the ecological and demographic features of invasive species within their native ranges.     

Effect of continuous Cd feeding on the performance of a nitrification reactor

The inhibitory effect of Cd on nitrification was investigated in a continuous-flow system with enriched nitrifying bacteria. The maximum specific ammonium utilization rate and the half-saturation constant were found as 671 mg NH₄–N/g VSS day and 0.48 mg/l, respectively. In the case of continuous Cd input at 1 and 2.5 mg/l, nitrification was inhibited by 30% and 47%, respectively. Inhibition ranged from 20% to 40% and no further increase in inhibition was exhibited in new runs except at 10 mg/l influent Cd. At 10 mg/l influent Cd, specific ammonium utilization and nitrate production rates were inhibited by 90%. On the contrary, a serious nitrite accumulation was not observed during this period. When Cd feeding was stopped, recovery from inhibition was observed after 37 day which was seen by the improvement in ammonium utilization and nitrate production rates. A shift in microbial population from the initial Nitrosomonas sp. to the Cd-tolerant Nitrosospira sp. was observed in the recovery period from severe Cd inhibition. After the domination of Nitrosospira species, redosing at 10 mg/l and then at 15 mg/l did not affect the performance as before.