Partial reconstruction of the microvillus core bundle: characterization of villin as a Ca(++)-dependent, actin-bundling/depolymerizing protein

The brush border, isolated from chicken intestine epithelial cells, contains the 95,000 relative molecular mass (M(r)) polypeptide, villin. This report describes the purification and characterization of villin as a Ca(++)-dependent, actin bundling/depolymerizing protein. Then 100,000 g supernatant from a Ca(++) extract of isolated brush borders is composed of three polypeptides of 95,000 (villin), 68,000 (fimbrin), and 42,000 M(r) (actin). Villin, following purification from this extract by differential ammonium sulfate precipitation and ion-exchange chromatography, was mixed with skeletal muscle F-actin. Electron microscopy of negatively stained preparations of these villin-actin mixtures showed that filament bundles were present. This viscosity, sedimentability, and ultrastructural morphology of filament bundles are dependent on the villin:actin molar ratio, the pH, and the free Ca(++) concentration in solution. At low free Ca(++) (less than 10(-6) M), the amount of protein in bundles, when measured by sedimentation, increased as the villin: actin molar ratio increased and reached a plateau at approximately a 4:10 ratio. This behavior correlates with the conversion of single actin filaments into filament bundles as detected in the electron microscope. At high free Ca(++) (more than 10(-6) M), there was a decrease in the apparent viscosity in the villin-actin mixtures to a level measured for the buffer. Furthermore, these Ca(++) effects were correlated with the loss of protein sedimented, the disappearance of filament bundles, and the appearance of short fragments of filaments. Bundle formation is also pH-sensitive, being favored at mildly acidic pH. A decrease in the pH from 7.6 to 6.6 results in an increase in sedimentable protein and also a transformation of loosly associated actin filaments into compact actin bundles. These results are consistent with the suggestions that villin is a bundling protein in the microvillus and is responsible for the Ca(++)-sensitive disassembly of the microvillar cytoskeleton. Thus villin may function in the cytoplasm as a major cytoskeletal element regulating microvillar shape.     

Reevaluation of brush border motility: calcium induces core filament solation and microvillar vesiculation

The report that microvillar cores of isolated, demembranated brush borders retract into the terminal web in the presence of Ca(++) and ATP has been widely cited as an example of Ca(++)-regulated nonmuscle cell motility. Because of recent findings that microvillar core actin filaments are cross-linked by villin which, in the presence of micromolar Ca(++), fragments actin filaments, we used the techniques of video enhanced differential interference contrast, immunofluorescence, and phase contrast microscopy and thin-section electron microscopy (EM) to reexamine the question of contraction of isolated intestinal cell brush borders. Analysis of video enhanced light microscopic images of Triton- demembranated brush borders treated with a buffered Ca(++) solution shows the cores disintegrating with the terminal web remaining intact; membranated brush borders show the microvilli to vesiculate with Ca(++). Using Ca(++)/EGTA buffers, it is found that micromolar free Ca(++) causes core filament dissolution in membranated or demembranated brush borders, Ca(++) causes microvillar core solation followed by complete vesiculation of the microvillar membrane. The lengths of microvilli cores and rootlets were measured in thin sections of membranated and demembranated controls, in Ca(++)-, Ca(++) + ATP-, and in ATP-treated brush borders. Results of these measurements show that Ca(++) alone causes the complete solation of the microvillar cores, yet the rootlets in the terminal web region remain of normal length. These results show that microvilli do not retract into the terminal web in response to Ca(++) and ATP but rather that the microvillar cores disintegrate. NBD-phallicidin localization of actin and fluorescent antibodies to myosin reveal a circumferential band of actin and myosin in mildly permeabilized cells in the region of the junctional complex. The presence of these contractile proteins in this region, where other studies have shown a circumferential band of thin filaments, is consistent with the hypothesis that brush borders may be motile through the circumferential constriction of this “contractile ring,” and is also consistent with the observations that ATP-treated brush borders become cup shaped as if there had been a circumferential constriction.     

Genetic Assay for Small Fragments of Bacteriophage φX174 Deoxyribonucleic Acid

The double-stranded replicative form deoxyribonucleic acid (RF-DNA) of bacteriophage phiX174 was fragmented by pancreatic deoxyribonuclease, and the complementary strand fragments were then annealed to intact viral single strands. When such complexes infected Escherichia coli spheroplasts, some of the progeny virus bore genetic markers derived from the RF-DNA fragments. In this way, genetic markers have been salvaged from DNA fragments less than 50 nucleotides in length. This method is potentially useful as a specific assay to aid in the purification of genetically defined DNA fragments and also as a mechanism for the incorporation of small chemically synthesized DNA sequences into viral genomes.     

Tempo and mode of concerted evolution in the L1 repeat family of mice

A 300-bp DNA sequence has been determined for 30 (10 from each of three species of mice) random isolates of a subset of the long interspersed repeat family L1. From these data we conclude that members of the L1 family are evolving in concert at the DNA sequence level in Mus domesticus, Mus caroli, and Mus platythrix. The mechanism responsible for this phenomenon may be either duplicative transposition, gene conversion, or a combination of the two. The amount of intraspecies divergence averages 4.4%, although between species base substitutions accumulate at the rate of approximately 0.85%/Myr to a maximum divergence of 9.1% between M. platythrix and both M. domesticus and M. caroli. Parsimony analysis reveals that the M. platythrix L1 family has evolved into a distinct clade in the 10-12 Myr since M. platythrix last shared a common ancestor with M. domesticus and M. caroli. The parsimony tree also provides a means to derive the average half-life of L1 sequences in the genome. The rates of gain and loss of individual copies of L1 were estimated to be approximately equal, such that approximately one-half of them turn over every 3.3 Myr.      

Prenatal diagnosis by linkage: hemophilia A and polymorphic glucose-6-phosphate deydrogenase.

Close linkage between the loci for G6PD and hemophilia A allows prenatal diagnosis of hemophilia in the fetuses of certain women who are heterozygous for two electrophoretic types of G6PD. A pregnant woman, whose mother was an obligate heterozygote for hemophilia, had factor VIII levels and a G6PD phenotype that failed to indicate clearly whether or not she was heterozygous for hemophilia. The G6PD phenotype of her male fetus revealed that the fetus was unlikely to have hemophilia.     

The nucleotide sequence recognized by the Escherichia coli K12 restriction and modification enzymes.

The sites recognized by the Escherichia coli K12 restriction endonuclease were localized to defined regions on the genomes of phage φXsK1, φXsK2, and G4 by the marker rescue technique. Methyl groups placed on the genome of plasmid pBR322 by the E. coli K12 modification methylase were mapped in HinfI fragments 1 and 3, and HaeIII fragments 1 and 3. A homology of seven nucleotides in the configuration: 5′-A-A-C .. 6N .. G-T-G-C-3′, where 6N represents six unspecified nucleotides, was found among the DNA sequences containing the five EcoK sites of φXsK1, φXsK2, G4, and pBR322. Three lines of evidence indicate that this sequence constitutes the recognition site of the E. coli K12 restriction enzyme. The C in 5′-A-A-C and the T in 5′-G-T-G-C are locations of mutations leading to loss or gain of the site and thus are positions recognized by the enzyme. This sequence does not occur on φXam3cs70, simian virus 40 (SV40), and fd DNAs which do not possess EcoK sites, and occurs only once on φXsK1, φXsK2, and G4 DNAs, and twice on pBR322 DNA. In order to prove that all seven conserved nucleotides are essential for the recognition by the E. coli K12 restriction enzyme, the nucleotide sequences of φX174, G4, SV40, fd, and pBR322 were searched for sequences differing from the sequence 5′-A-A-C .. 6N .. G-TG-C-3′ at only one of the specified positions. It was found that sequences differing at each of the specified positions occur on DNA sequences that do not contain the EcoK sites. Thus, the recognition site of the E. coli K12 restriction enzyme has the same basic structure as that of the EcoB site (Lautenberger et al., 1978). In each case there are two domains, one containing three and the other four specific nucleotides, separated by a sequence of unspecified bases. However, the unspecified sequence in the EcoK site must be precisely six bases instead of the eight found in the EcoB site. Alignment of the EcoK and EcoB sites suggests that four of the seven specified nucleotides are conserved between the sequences recognized by these two allelic restriction and modification systems.     

Gene duplications in evolution of archaeal family B DNA polymerases.

All archaeal DNA-dependent DNA polymerases sequenced to date are homologous to family B DNA polymerases from eukaryotes and eubacteria. Presently, representatives of the euryarchaeote division of archaea appear to have a single family B DNA polymerase, whereas two crenarchaeotes, Pyrodictium occultum and Sulfolobus solfataricus, each possess two family B DNA polymerases. We have found the gene for yet a third family B DNA polymerase, designated B3, in the crenarchaeote S. solfataricus P2. The encoded protein is highly divergent at the amino acid level from the previously characterized family B polymerases in S. solfataricus P2 and contains a number of nonconserved amino acid substitutions in catalytic domains. We have cloned and sequenced the ortholog of this gene from the closely related Sulfolobus shibatae. It is also highly divergent from other archaeal family B DNA polymerases and, surprisingly, from the S. solfataricus B3 ortholog. Phylogenetic analysis using all available archaeal family B DNA polymerases suggests that the S. solfataricus P2 B3 and S. shibatae B3 paralogs are related to one of the two DNA polymerases of P. occultum. These sequences are members of a group which includes all euryarchaeote family B homologs, while the remaining crenarchaeote sequences form another distinct group. Archaeal family B DNA polymerases together constitute a monophyletic subfamily whose evolution has been characterized by a number of gene duplication events.     

Determination of a functional ancestral sequence and definition of the 5' end of A-type mouse L1 elements

The complete nucleotide sequence of L1Md-A13, a 6372 base-pair (bp) member of the L1Md repetitive family isolated from a BALB/c mouse genomic DNA library, is reported. The nucleotide sequence of 4331 bp from the 5' end of L1Md-9, which is located in the beta-globin complex of the C57BL/10 mouse, is also reported. Parsimony analysis of these sequences plus two previously reported L1Md sequences allows the determination of an ancestral L1Md sequence. Analysis of the L1Md population indicates that this ancestral sequence is likely to represent a functional L1 sequence. This ancestral sequence confirms that the length (1137 bp and 3900 bp) and relationship (14 bp overlap) of the two large open reading frames previously reported are conserved features of the L1Md family. It also allows the determination of an ancestral amino acid sequence for these two open reading frames. Full-length L1Md elements have one of two sequences tandemly repeated at the 5' end. These two monomers are called A-type and F-type. Our data define the 5' end of A-type full-length L1Md elements. L1Md elements of the A-type have varying numbers of tandemly repeated 208 bp monomers, but each element ends about 78 bp from the 5' end of the terminal 208 bp monomer.