Post‐transcriptional regulation of α‐smooth muscle actin determines the contractile phenotype of Dupuytren's nodular cells

The objective was to study Dupuytren's myofibroblast cells in constrained collagen matrices in order to more closely emulate their in vivo environment and, to correlate their contractility with α‐smooth muscle actin (α‐SMA) expression and determine if dermal fibroblasts regulate Dupuytren's myofibroblast phenotype. Isotonic and isometric force contraction by cells isolated from Dupuytren's nodules, palmar and non‐palmar skin fibroblasts was measured in collagen matrices. The effect of co‐culturing nodule cells with dermal fibroblasts on isometric contraction was examined. Isometric contraction was correlated with levels of α‐SMA mRNA by pcr and protein by Western blotting, and α‐SMA distribution assessed by immunofluorescence. Dupuytren's nodule cells exhibited similar levels of isotonic contraction to both palmar and non‐palmar dermal fibroblasts. However, nodule cells generated high levels of isometric force (mean: 3.5 dynes/h), which continued to increase over 24 h to a maximum of 173 dynes. In contrast, dermal fibroblasts initially exhibited low levels of contraction (mean: 0.5 dynes/h) and reached tensional homeostasis on average after 15 h (range: 4–20 h), with a maximum force of 52 dynes. Although all three cell types had similar α‐SMA mRNA levels, increased levels of α‐SMA protein were observed in nodule cells compared to dermal fibroblasts. α‐SMA localised to stress fibres in 35% (range: 26–50%) of nodule cells compared to only 3% (range:0–6%) of dermal fibroblasts. Co‐cultures of Dupuytren's cells and dermal fibroblasts showed no contractile differences. The contractile phenotype of Dupuytren's myofibroblasts is determined by increased α‐SMA protein distributed in stress fibres, not by cellular mRNA levels. Dupuytren's cell contractility is not influenced by dermal fibroblasts. J. Cell. Physiol. 224: 681–690, 2010. © 2010 Wiley‐Liss, Inc.     

Evidence from a Ghanaian population of known African descent to support the proposition that hemochromatosis is a Caucasian disorder

Mutations in the HFE gene on chromosome 6 are believed to cause the iron overload disorder hemochromatosis, the most common single gene disorder in northern Europeans. Two mutations have been described previously: C282Y, with an allele frequency of between 3% and 10% in the caucasian population, and H63D, which has an allele frequency of 16%. Published data shows that C282Y appears to be causative in the homozygous state, while the frequency of H63D/C282Y compound heterozygotes is much greater than expected in patient groups. There also appears to be a slightly elevated risk for H63D homozygotes. Hemochromatosis has been thought to be primarily a caucasian disorder. We have studied 97 healthy, black Ghanaian subjects, whose parents and grandparents were also African, to find the frequency of the two mutations. C282Y was absent, while H63D occurred in 2 individuals. These differences are significant at the 0.05 and 0.001 levels, respectively. The prevalence of H63D homozygotes in this population at 1 in 10,000 is clearly of no use in studying the effect of this genotype on phenotype. However, this study suggests an absence of the C282Y mutation in African populations, and the possibility that other populations might provide different genotypes and hence an analysis of H63D risk. A possible heterozygote advantage for the mutation is discussed.     

Heart valve and arterial tissue engineering

Abstract.  In the industrialized world, cardiovascular disease alone is responsible for almost half of all deaths. Many of the conditions can be treated successfully with surgery, often using transplantation techniques; however, autologous vessels or human-donated organs are in short supply. Tissue engineering aims to create specific, matching grafts by growing cells on appropriate matrices, but there are many steps between the research laboratory and the operating theatre. Neo-tissues must be effective, durable, non-thrombogenic and non-immunogenic. Scaffolds should be bio-compatible, porous (to allow cell/cell communication) and amenable to surgery. In the early days of cardiovascular tissue engineering, autologous or allogenic cells were grown on inert matrices, but patency and thrombogenicity of grafts were disappointing. The current ethos is toward appropriate cell types grown in (most often) a polymeric matrix that degrades at a rate compatible with the cells' production of their own extracellular matrical proteins, thus gradually replacing the graft with a living counterpart. The geometry is crucial. Computer models have been made of valves, and these are used as three-dimensional patterns for mass-production of implant scaffolds. Vessel walls have integral connective tissue architecture, and application of physiological level mechanical forces conditions bio-engineered components to align in precise orientation. This article reviews the concepts involved and successes achieved to date.     

Enhanced fibroblast contraction of 3D collagen lattices and integrin expression by TGF-beta1 and -beta3: mechanoregulatory growth factors?

Generation of contractile forces as fibroblasts attach and migrate through collagenous substrates is a fundamental behavior, yet its regulation and consequences are obscure. Although the transforming growth factor-betas (TGF-beta) are similarly important in fibrosis and tissue repair, their role in contraction is controversial. Using a quantitative, 3D collagen culture model we have measured the effects of TGF-beta1 and -beta3 on contractile forces generated by human dermal fibroblasts. Maximal stimulation was between 7.5 and 15 ng/ml of TGF-beta1. Higher doses were inhibitory (30 ng/ml), giving a bell-shaped dose response. The initial rate of force generation was increased sevenfold (15 ng/ml). A similar response pattern was seen with TGF-beta3 alone. However, the addition of both isoforms together stimulated a biphasic increase in force generation, suggesting that there was a distinct temporal cooperativity between the two isforms. This very early onset (10-20 min) of stimulation suggested that TGF-beta might act through cell attachment and integrin function and the effect of TFG-beta on expression of fibronectin (FnR) and vitronectin (VnR) integrin receptors was monitored over the same time scale. TGF-beta1 dramatically up-regulated VnR expression, relative to FnR, over time but the optimal time for this was 2-4 h later than that of force stimulation. It is concluded that TGF-beta1 and -beta3 behave here primarily as mechanoregulatory growth factors and that stimulation of integrin expression may be a consequence of the altered cell stress.     

The preservation of ultrastructure in saturated phosphatidyl cholines by tannic acid in model systems and type II pneumocytes

The preservation for electron microscopy of saturated phospholipids in general, and phosphatidyl choline (PC)in particular, remains and unsolved problem since OsO(4) and glutaraldehyde are incapable of interacting with PC directly. However, by introducing tannic acid preceding osmication, we were able to demonstrate highly ordered, preserved lamellar structures in model experiments with saturated PC, and in vivo experiments type II pneumocytes of lung tissue. The secretory bodies of the latter are known to contain a high proportion of these saturated phospholipids. In both cases, the repeating periodicity approximated 45 A. It was determined that tannic acid interacts with the choline component of PC to form a "complex," which then could be stabilized by treatment with OsO(4). In the absence of osmication, the PC-tannic acid complex acid did not survive conventional dehydration techniques, but osmication permitted conventional Epon embedment. Sphingomyelin (SPH), which contains choline, behaved similarly in model experiments. But there was no evidence of a comparable reaction with tannic acid using phosphatidyl ethanolamine (PEA), phosphatidyl serine (PS), or phosphstidy inositol (PI). Chemical studies indicted a high pH dependency for the formation of the PC- tannic acid complex. Also, experiments demonstrated its dissociation in various organic solvents. Sharp delineation and great contrast of the polar zones in the ordered lamellar structures was achieved by additional staining with lead citrate thus leading to the conclusion that tannic acid serves as a multivalent agent, capable of simultaneous interaction with saturated PC, OsO(4), and lead citrate stains.     

Cyclic amp-induced morphological transformation of cells infected by temperature-sensitive mouse sarcoma virus: Expression of transformation-associated markers

Normal rat kidney (NRK) cells infected with a temperature-sensitive (ts) mutant of mouse sarcoma virus (NRK [MSV-1b]) express the transformed phenotype when grown under permissive conditions, but acquire the normal phenotype when grown under restrictive conditions. Addition of 3', 5' cyclic adenosine monophosphate (cAMP) to NRK (MSV-1b) cells grown at the restrictive temperature results in morphological transformation. To determine whether other markers associated with the transformed phenotype were coordinately expressed after cAMP exposure, concanavalin A (Con A) agglutinability, hexose transport rate, and incorporation of radioactively labeled fucose into fucolipid III and fucolipid IV (FL III and FL IV ) of the cells were examined. NRK cells transformed by wild-type MSV or NRK(MSV- 1b) grown under permissive conditions were agglutinated by low concentrations of Con A and exhibited relatively high maximal agglutination levels which were specifically inhibited by α-methyl-D-mannoside. In contrast, NRK (MSV-1b) cells grown under restrictive conditions were weakly agglutinated by Con A and exhibited reduced maximal agglutination levels, similar to uninfected NRK cells. Treatment of NRK (MSV-1b) cells at the restrictive temperature with cAMP resulted in morphological transformation and a change in the pattern of incorporation of labeled fucose inot FL III and FL IV to one comparable to that of NRK (MSV-1b) cells at the permissive temperature or to NRK cells transformed by wild-type MSV. In contrast, cAMP treatment resulted in no increase in Con A agglutinability or 2 deoxy-D- [(3)H]glucose transport relative to mock treated cultures. The results demonstrate that cAMP-induced morphological transformation and altered fucolipid composition of NRK (MSV-1b) cells are not correlated with alterations in hexose transport rate or Con A agglutinability.     

The action of structural analogues of ethidium bromide on the mitochondrial genome of yeast

We have studied the effects on the yeast mitochondrial genome of four analogues of ethidium bromide, in which the phenyl moiety has been replaced by linear alkyl chains of lengths varying from seven to fifteen carbon atoms. These analogues are more efficient than ethidium bromide in inducing petite mutants inSaccharomyces cerevisiae. The drugs also cause a loss of mtDNA from the cellsin vivo; however these analogues are in fact less effective inhibitors of mitochondrial DNA replicationper se, as shown by directin vitro studies. It is concluded that these analogues are more efficient than ethidium bromide in causing the fragmentation of mitochondrial DNA inS. cerevisiae.     

In situ hybridization at the electron microscope level: hybrid detection by autoradiography and colloidal gold

In situ hybridization has become a standard method for localizing DNA or RNA sequences in cytological preparations. We developed two methods to extend this technique to the transmission electron microscope level using mouse satellite DNA hybridization to whole mount metaphase chromosomes as the test system. The first method devised is a direct extension of standard light microscope level using mouse satellite DNA hybridization to whole mount metaphase chromosomes as the test system. The first method devised is a direct extension of standard light microscope in situ hybridization. Radioactively labeled complementary RNA (cRNA) is hybridized to metaphase chromosomes deposited on electron microscope grids and fixed in 70 percent ethanol vapor; hybridixation site are detected by autoradiography. Specific and intense labeling of chromosomal centromeric regions is observed even after relatively short exposure times. Inerphase nuclei present in some of the metaphase chromosome preparations also show defined paatterms of satellite DNA labeling which suggests that satellite-containing regions are associate with each other during interphase. The sensitivity of this method is estimated to at least as good as that at the light microscope level while the resolution is improved at least threefold. The second method, which circumvents the use of autoradiogrphic detection, uses biotin-labeled polynucleotide probes. After hybridization of these probes, either DNA or RNA, to fixed chromosomes on grids, hybrids are detected via reaction is improved at least threefold. The second method, which circumvents the use of autoradiographic detection, uses biotin-labeled polynucleotide probes. After hybridization of these probes, either DNA or RNA, to fixed chromosomes on grids, hybrids are detected via reaction with an antibody against biotin and secondary antibody adsorbed to the surface of over centromeric heterochromatin and along the associated peripheral fibers. Labeling is on average ten times that of background binding. This method is rapid and possesses the potential to allow precise ultrastructual localization of DNA sequences in chromosomes and chromatin.     

Quantitative analysis of collagen gel contractile forces generated by dermal fibroblasts and the relationship to cell morphology

The force generated in granulation tissue during wound contraction is thought to be cell mediated; however, it is unclear whether contractile forces are generated by fibroblast locomotion or contraction of myofibroblasts. To help clarify this question the force of this contraction can now be determined accurately in a human dermal fibroblast collagen lattice system using a novel instrument known as a Culture Force Monitor. Three distinct phases of contraction of such collagen gels could be identified over the first 24 hours. Most of the force generated by human dermal fibroblasts was produced during the first stage in parallel with cell attachment and associated changes in cell shape, and the appearance of cell processes. During this initial 24 hours no evidence could be found for the presence of myofibroblasts, but stereoscopic and electron microscopic analysis at a range of time points indicated that migratory fibroblasts were present in the system. Comparison of the contraction profiles of cells extracted from other tissues (tendon and articular cartilage), and extracted by different means from the same tissue specimen, indicated that different populations of fibroblasts can be distinguished on the basis of their pattern of contractions. It would seem that most of the force generated in this model is a result of fibroblast attachment and movement within the collagen lattice. Furthermore, different groups of fibroblasts, even within the same tissue, may vary in their contraction (hence locomotory) activity. © 1996 Wiley-Liss, Inc.     

Plasticizers increase adhesion of the deteriogenic fungus Aureobasidium pullulans to polyvinyl chloride.

Initial adhesion of fungi to plasticized polyvinyl chloride (pPVC) may determine subsequent colonization and biodeterioration processes. The deteriogenic fungus Aureobasidium pullulans was used to investigate the physicochemical nature of adhesion to both unplasticized PVC (uPVC) and pPVC containing the plasticizers dioctyl phthalate (DOP) and dioctyl adipate (DOA). A quantitative adhesion assay using image analysis identified fundamental differences in the mechanism of adhesion of A. pullulans blastospores to these substrata. Adhesion to pPVC was greater than that to uPVC by a maximum of 280% after a 4-h incubation with 10(8) blastospores ml(-1). That plasticizers enhance adhesion to PVC was confirmed by incorporating a dispersion of both DOA and DOP into the blastospore suspension. Adhesion to uPVC was increased by up to 308% in the presence of the dispersed plasticizers. Hydrophobic interactions were found to dominate adhesion to uPVC because (i) a strong positive correlation was observed between substratum hydrophobicity (measured by using a dynamic contact angle analyzer) and adhesion to a range of unplasticized polymers including uPVC, and (ii) neither the pH nor the electrolyte concentration of the suspension buffer, both of which influence electrostatic interactions, affected adhesion to uPVC. In contrast, adhesion to pPVC is principally controlled by electrostatic interactions. Enhanced adhesion to pPVC occurred despite a relative reduction of 13 degrees in the water contact angle of pPVC compared to that of uPVC. Furthermore, adhesion to pPVC was strongly dependent on both the pH and electrolyte concentration of the suspension medium, reaching maximum levels at pH 8 and with an electrolyte concentration of 10 mM NaCl. Plasticization with DOP and DOA therefore increases adhesion of A. pullulans blastospores to pPVC through an interaction mediated by electrostatic forces.