Ciprofloxacin is an inhibitor of the Mcm2-7 replicative helicase

Most currently available small molecule inhibitors of DNA replication lack enzymatic specificity, resulting in deleterious side effects during use in cancer chemotherapy and limited experimental usefulness as mechanistic tools to study DNA replication. Towards development of targeted replication inhibitors, we have focused on Mcm2-7 (minichromosome maintenance protein 2–7), a highly conserved helicase and key regulatory component of eukaryotic DNA replication. Unexpectedly we found that the fluoroquinolone antibiotic ciprofloxacin preferentially inhibits Mcm2-7. Ciprofloxacin blocks the DNA helicase activity of Mcm2-7 at concentrations that have little effect on other tested helicases and prevents the proliferation of both yeast and human cells at concentrations similar to those that inhibit DNA unwinding. Moreover, a previously characterized mcm mutant (mcm4chaos3) exhibits increased ciprofloxacin resistance. To identify more potent Mcm2-7 inhibitors, we screened molecules that are structurally related to ciprofloxacin and identified several that compromise the Mcm2-7 helicase activity at lower concentrations. Our results indicate that ciprofloxacin targets Mcm2-7 in vitro, and support the feasibility of developing specific quinolone-based inhibitors of Mcm2-7 for therapeutic and experimental applications.     

Evaluation of adamantane hydroxamates as botulinum neurotoxin inhibitors: Synthesis,crystallography, modeling,kinetic and cellular based studies

Botulinum neurotoxins (BoNTs) are the most lethal biotoxins known to mankind and are responsible for the neuroparalytic disease botulism. Current treatments for botulinum poisoning are all protein based and thus have a limited window of treatment opportunity. Inhibition of the BoNT light chain protease (LC) has emerged as a therapeutic strategy for the treatment of botulism as it may provide an effective post exposure remedy. Using a combination of crystallographic and modeling studies a series of hydroxamates derived from 1-adamantylacetohydroxamic acid (3a) were prepared. From this group of compounds, an improved potency of about 17-fold was observed for two derivatives. Detailed mechanistic studies on these structures revealed a competitive inhibition model, with a K_i = 27 nM, which makes these compounds some of the most potent small molecule, non-peptidic BoNT/A LC inhibitors reported to date.     

Dynamic microtubules produce an asymmetric E-cadherin–Bazooka complex to maintain segment boundaries

Distributing junctional components around the cell periphery is key for epithelial tissue morphogenesis and homeostasis. We discovered that positioning of dynamic microtubules controls the asymmetric accumulation of E-cadherin. Microtubules are oriented preferentially along the dorso-ventral axis in Drosophila melanogaster embryonic epidermal cells, and thus more frequently contact E-cadherin at dorso-ventral cell–cell borders. This inhibits RhoGEF2, reducing membrane recruitment of Rho-kinase, and increasing a specific E-cadherin pool that is mobile when assayed by fluorescence recovery after photobleaching. This mobile E-cadherin is complexed with Bazooka/Par-3, which in turn is required for normal levels of mobile E-cadherin. Mobile E-cadherin–Bazooka prevents formation of multicellular rosette structures and cell motility across the segment border in Drosophila embryos. Altogether, the combined action of dynamic microtubules and Rho signaling determines the level and asymmetric distribution of a mobile E-cadherin–Bazooka complex, which regulates cell behavior during the generation of a patterned epithelium.     

Facility-Specific “House” Microbiome Drives Microbial Landscapes of Artisan Cheesemaking Plants

Cheese fermentations involve the growth of complex microbial consortia, which often originate in the processing environment and drive the development of regional product qualities. However, the microbial milieus of cheesemaking facilities are largely unexplored and the true nature of the fermentation-facility relationship remains nebulous. Thus, a high-throughput sequencing approach was employed to investigate the microbial ecosystems of two artisanal cheesemaking plants, with the goal of elucidating how the processing environment influences microbial community assemblages. Results demonstrate that fermentation-associated microbes dominated most surfaces, primarily Debaryomyces and Lactococcus, indicating that establishment of these organisms on processing surfaces may play an important role in microbial transfer, beneficially directing the course of sequential fermentations. Environmental organisms detected in processing environments dominated the surface microbiota of washed-rind cheeses maturing in both facilities, demonstrating the importance of the processing environment for populating cheese microbial communities, even in inoculated cheeses. Spatial diversification within both facilities reflects the functional adaptations of microbial communities inhabiting different surfaces and the existence of facility-specific “house” microbiota, which may play a role in shaping site-specific product characteristics.     

Spawning, egg development and early ontogenesis in rock cod Patagonotothen ramsayi (Regan, 1913) caught on the Patagonian Shelf and maintained in captivity

Rock cod Patagonotothen ramsayi (Regan, 1913) is one of the most abundant fish of the family Nototheniidae inhabiting the Patagonian Shelf and upper Slope in the southwest Atlantic. Recently, P. ramsayi became an important commercial species around the Falkland Islands with annual catch of 60,000–75,000 t. The present study aimed to reveal previously unknown aspects of reproductive biology of P. ramsayi during the first successful maintenance of adults for more than a year in an aquaculture facility with running seawater. The fish spawned at the end of austral winter. During spawning, males changed their coloration dramatically, occupied artificial shelters on the bottom and showed aggressive territorial behaviour. Egg masses were light-yellow to light-orange irregular spongiform. They were negatively buoyant, but located outside shelters and were ignored by males. Egg diameters varied between 2.1 and 2.3 mm, and the number of eggs per egg mass ranged from 26,800 to 123,400. Embryogenesis lasted 28–32 days. Total lengths of newly hatched larvae ranged from 6.2 to 6.7 mm. The yolk sac feeding period lasted approximately 11 days, during which the larvae showed negative phototaxis. One-month-old larvae attained 8.8–9.0 mm in length. This study confirms that P. ramsayi exhibit the reproductive strategy typical for nototheniid species occupying low-latitude peripheries of their distributional range, characterised by a combination of r-features (small eggs and larvae, high fecundity) and K-features (territorial behaviour and possible nest guarding).     

Algal Bioremediation of Waste Waters from Land-Based Aquaculture Using Ulva: Selecting Target Species and Strains

The optimised reduction of dissolved nutrient loads in aquaculture effluents through bioremediation requires selection of appropriate algal species and strains. The objective of the current study was to identify target species and strains from the macroalgal genus Ulva for bioremediation of land-based aquaculture facilities in Eastern Australia. We surveyed land-based aquaculture facilities and natural coastal environments across three geographic locations in Eastern Australia to determine which species of Ulva occur naturally in this region and conducted growth trials at three temperature treatments on a subset of samples from each location to determine whether local strains had superior performance under local environmental conditions. DNA barcoding using the markers ITS and tufA identified six species of Ulva, with U. ohnoi being the most common blade species and U. sp. 3 the most common filamentous species. Both species occurred at multiple land-based aquaculture facilities in Townsville and Brisbane and multiple strains of each species grew well in culture. Specific growth rates of U. ohnoi and U. sp. 3 were high (over 9% and 15% day⁻¹ respectively) across temperature treatments. Within species, strains of U. ohnoi had higher growth in temperatures corresponding to local conditions, suggesting that strains may be locally adapted. However, across all temperature treatments Townsville strains had the highest growth rates (11.2–20.4% day⁻¹) and Sydney strains had the lowest growth rates (2.5–8.3% day⁻¹). We also found significant differences in growth between strains of U. ohnoi collected from the same geographic location, highlighting the potential to isolate and cultivate fast growing strains. In contrast, there was no clearly identifiable competitive strain of filamentous Ulva, with multiple species and strains having variable performance. The fast growth rates and broad geographical distribution of U. ohnoi make this an ideal species to target for bioremediation activities at land-based aquaculture facilities in Eastern Australia.     

Stand-replacing wildfires alter the community structure of wood-inhabiting fungi in southwestern ponderosa pine forests of the USA

Increases in stand-replacing wildfires in the western USA have widespread implications for ecosystem carbon (C) cycling, in part because the decomposition of trees killed by fire can be a long-term source of CO₂ to the atmosphere. Knowledge of the composition and function of decay fungi communities may be important to understanding how wildfire alters C cycles. We assessed the effects of stand-replacing wildfires on the community structure of wood-inhabiting fungi along a 32-yr wildfire chronosequence. Fire was associated with low species richness for up to 4 yr and altered species composition relative to unburned forest for the length of the chronosequence. A laboratory incubation demonstrated that species varied in their capacity to decompose wood; Hypocrea lixii, an indicator of the most recent burn, caused the lowest decomposition rate. Our results show that stand-replacing wildfires have long-term effects on fungal communities, which may have consequences for wood decomposition and C cycling.     

Deaths and Medical Visits Attributable to Environmental Pollution in the United Arab Emirates

Background

This study estimates the potential health gains achievable in the United Arab Emirates (UAE) with improved controls on environmental pollution. The UAE is an emerging economy in which population health risks have shifted rapidly from infectious diseases to chronic conditions observed in developed nations. The UAE government commissioned this work as part of an environmental health strategic planning project intended to address this shift in the nature of the country’s disease burden.

Methods and Findings

We assessed the burden of disease attributable to six environmental exposure routes outdoor air, indoor air, drinking water, coastal water, occupational environments, and climate change. For every exposure route, we integrated UAE environmental monitoring and public health data in a spatially resolved Monte Carlo simulation model to estimate the annual disease burden attributable to selected pollutants. The assessment included the entire UAE population (4.5 million for the year of analysis). The study found that outdoor air pollution was the leading contributor to mortality, with 651 attributable deaths (95% confidence interval [CI] 143–1,440), or 7.3% of all deaths. Indoor air pollution and occupational exposures were the second and third leading contributors to mortality, with 153 (95% CI 85–216) and 46 attributable deaths (95% CI 26–72), respectively. The leading contributor to health-care facility visits was drinking water pollution, to which 46,600 (95% CI 15,300–61,400) health-care facility visits were attributed (about 15% of the visits for all the diseases considered in this study). Major study limitations included (1) a lack of information needed to translate health-care facility visits to quality-adjusted-life-year estimates and (2) insufficient spatial coverage of environmental data.

Conclusions

Based on international comparisons, the UAE’s environmental disease burden is low for all factors except outdoor air pollution. From a public health perspective, reducing pollutant emissions to outdoor air should be a high priority for the UAE’s environmental agencies.