Novel High Efficient Coatings for Anti-Microbial Surgical Sutures Using Chlorhexidine in Fatty Acid Slow-Release Carrier Systems

Sutures can cause challenging surgical site infections, due to capillary effects resulting in bacteria permeating wounds. Anti-microbial sutures may avoid these complications by inhibiting bacterial pathogens. Recently, first triclosan-resistances were reported and therefore alternative substances are becoming clinically relevant. As triclosan alternative chlorhexidine, the “gold standard” in oral antiseptics was used. The aim of the study was to optimize novel slow release chlorhexidine coatings based on fatty acids in surgical sutures, to reach a high anti-microbial efficacy and simultaneously high biocompatibility. Sutures were coated with chlorhexidine laurate and chlorhexidine palmitate solutions leading to 11, 22 or 33 µg/cm drug concentration per length. Drug release profiles were determined in aqueous elutions. Antibacterial efficacy against Staphylococcus aureus was assessed in agar diffusion tests. Biocompatibility was evaluated via established cytotoxicity assay (WST-1). A commercially triclosan-containing suture (Vicryl Plus), was used as anti-microbial reference. All coated sutures fulfilled European Pharmacopoeia required tensile strength and proved continuous slow drug release over 96 hours without complete wash out of the coated drug. High anti-microbial efficacy for up to 5 days was observed. Regarding biocompatibility, sutures using 11 µg/cm drug content displayed acceptable cytotoxic levels according to ISO 10993-5. The highest potential for human application were shown by the 11 µg/cm chlorhexidine coated sutures with palmitic acid. These novel coated sutures might be alternatives to already established anti-microbial sutures such as Vicryl Plus in case of triclosan-resistance. Chlorhexidine is already an established oral antiseptic, safety and efficacy should be proven for clinical applications in anti-microbial sutures.     

Numerical investigation of bone remodelling around immediately loaded dental implants using sika deer (Cervus nippon) antlers as implant bed

This study combines finite element method and animal studies, aiming to investigate tissue remodelling processes around dental implants inserted into sika deer antler and to develop an alternative animal consuming model for studying bone remodelling around implants. Implants were inserted in the antlers and loaded immediately via a self-developed loading device. After 3, 4, 5 and 6 weeks, implants and surrounding tissue were taken out. Specimens were scanned by μCT scanner and finite element models were generated. Immediate loading and osseointegration conditions were simulated at the implant-tissue interface. A vertical force of 10 N was applied on the implant. During the healing time, density and Young’s modulus of antler tissue around the implant increased significantly. For each time point, the values of displacement, stresses and strains in the osseointegration model were lower than those of the immediate loading model. As the healing time increased, the displacement of implants was reduced. The 3-week immediate loading model (9878 ± 1965 μstrain) illustrated the highest strains in the antler tissue. Antler tissue showed similar biomechanical properties as human bone in investigating the bone remodelling around implants, therefore the use of sika deer antler model is a promising alternative in implant biomechanical studies.     

Parkinson Disease Protein DJ-1 Binds Metals and Protects against Metal-induced Cytotoxicity

The progressive loss of motor control due to reduction of dopamine-producing neurons in the substantia nigra pars compacta and decreased striatal dopamine levels are the classically described features of Parkinson disease (PD). Neuronal damage also progresses to other regions of the brain, and additional non-motor dysfunctions are common. Accumulation of environmental toxins, such as pesticides and metals, are suggested risk factors for the development of typical late onset PD, although genetic factors seem to be substantial in early onset cases. Mutations of DJ-1 are known to cause a form of recessive early onset Parkinson disease, highlighting an important functional role for DJ-1 in early disease prevention. This study identifies human DJ-1 as a metal-binding protein able to evidently bind copper as well as toxic mercury ions in vitro. The study further characterizes the cytoprotective function of DJ-1 and PD-mutated variants of DJ-1 with respect to induced metal cytotoxicity. The results show that expression of DJ-1 enhances the cells'' protective mechanisms against induced metal toxicity and that this protection is lost for DJ-1 PD mutations A104T and D149A. The study also shows that oxidation site-mutated DJ-1 C106A retains its ability to protect cells. We also show that concomitant addition of dopamine exposure sensitizes cells to metal-induced cytotoxicity. We also confirm that redox-active dopamine adducts enhance metal-catalyzed oxidation of intracellular proteins in vivo by use of live cell imaging of redox-sensitive S3roGFP. The study indicates that even a small genetic alteration can sensitize cells to metal-induced cell death, a finding that may revive the interest in exogenous factors in the etiology of PD.     

Quantitative analysis of the local rates of growth of dicot leaves at a high temporal and spatial resolution,using image sequence analysis

A new technique is presented for quantitative mapping of dicot leaf growth at high spatial and temporal resolution, at a speed making online-mapping feasible. Time lapse video sequences of growing leaves are captured by a personal computer (PC) with a frame-grabber board and a standard CCD camera, and evaluated using algorithms that have been recently developed to analyse motion in dynamic image sequences. Growth can be detected at under 1% per hour, with a time resolution of minutes and a spatial resolution of a few millimeters. The new technique has been verified by comparing it with classical approaches to map integrated growth. Diurnal courses of leaf growth of Ricinus communis and tobacco are presented to demonstrate the localised character of growth in leaves. Expansion growth is restricted to the base of the leaf and is restricted to a few hours at the end of the night and the start of the day. The high resolution of the method is illustrated by mapping the responses to step-changes in leaf turgor. A 3 bar turgor jump led to a rapid transient expansion over the entire length of the leaf that was partially reversed when the turgor was relaxed.     

Engineering Filamentous Fungi for Conversion of d-Galacturonic Acid to l-Galactonic Acid

d-Galacturonic acid, the main monomer of pectin, is an attractive substrate for bioconversions, since pectin-rich biomass is abundantly available and pectin is easily hydrolyzed. l-Galactonic acid is an intermediate in the eukaryotic pathway for d-galacturonic acid catabolism, but extracellular accumulation of l-galactonic acid has not been reported. By deleting the gene encoding l-galactonic acid dehydratase (lgd1 or gaaB) in two filamentous fungi, strains were obtained that converted d-galacturonic acid to l-galactonic acid. Both Trichoderma reesei Δlgd1 and Aspergillus niger ΔgaaB strains produced l-galactonate at yields of 0.6 to 0.9 g per g of substrate consumed. Although T. reesei Δlgd1 could produce l-galactonate at pH 5.5, a lower pH was necessary for A. niger ΔgaaB. Provision of a cosubstrate improved the production rate and titer in both strains. Intracellular accumulation of l-galactonate (40 to 70 mg g biomass⁻¹) suggested that export may be limiting. Deletion of the l-galactonate dehydratase from A. niger was found to delay induction of d-galacturonate reductase and overexpression of the reductase improved initial production rates. Deletion of the l-galactonate dehydratase from A. niger also delayed or prevented induction of the putative d-galacturonate transporter An14g04280. In addition, A. niger ΔgaaB produced l-galactonate from polygalacturonate as efficiently as from the monomer.     

A review of methods to trace material flows into final products in dynamic material flow analysis: From industry shipments in physical units to monetary input–output tables,Part 1

Dynamic material flow analysis (dMFA) is widely used to model stock-flow dynamics. To appropriately represent material lifetimes, recycling potentials, and service provision, dMFA requires data about the allocation of economy-wide material consumption to different end-use products or sectors, that is, the different product stocks, in which material consumption accumulates. Previous estimates of this allocation only cover few years, countries, and product groups. Recently, several new methods for estimating end-use product allocation in dMFA were proposed, which so far lack systematic comparison. We review and systematize five methods for tracing material consumption into end-use products in inflow-driven dMFA and discuss their strengths and limitations. Widely used data on industry shipments in physical units have low spatio-temporal coverage, which limits their applicability across countries and years. Monetary input–output tables (MIOTs) are widely available and their economy-wide coverage makes them a valuable source to approximate material end-uses. We find four distinct MIOT-based methods: consumption-based, waste input–output MFA (WIO-MFA), Ghosh absorbing Markov chain, and partial Ghosh. We show that when applied to a given MIOT, the methods’ underlying input–output models yield the same results, with the exception of the partial Ghosh method, which involves simplifications. For practical applications, the MIOT system boundary must be aligned to those of dMFA, which involves the removal of service flows, sector (dis)aggregation, and re-defining specific intermediate outputs as final demand. Theoretically, WIO-MFA, applied to a modified MIOT, produces the most accurate results as it excludes massless and waste transactions. In part 2 of this work, we compare methods empirically and suggest improvements for aligning MIOT-dMFA system boundaries.     

Purification and characterization of fructan: fructan fructosyl transferase from chicory (Cichorium intybus L.) roots

Fructan: fructan fructosyl transferase (FFT, EC 2.4.1.100) was purified from chicory (Cichorium intybus L. var. foliosum cv. Flash) roots by a combination of ammonium sulfate precipitation, concanavalin A affinity chromatography, and anion- and cation-exchange chromatography. This protocol produced a 60-fold purification and a specific activity of 14.5 mol·(mg protein) ^–1·min^–1. The mass of the enzyme was 69 kDa as estimated by gel filtration. On sodium dodecyl sulfatepolyacrylamide gel electrophoresis and mass spectrometry, 52-kDa and 17-kDa fragments were found, suggesting that the enzyme was a heterodimer. Optimal activity was found between pH 5.5 and 6.5. The enzyme used 1-kestose, 1,1-nystose, oligofructan and commercial chicory root inulin (degree of polymerization 10) as donors and acceptors. Sucrose was the best acceptor but could not be used as a donor. However, at higher concentrations sucrose acted as a competitive inhibitor for donors of FFT. 1-Kestose was the most efficient and 1,1-nystose the least efficient donor. The purified enzyme exhibited -fructosidase activity, specially at higher temperatures and lower substrate concentrations. The synthesis of fructans from 1-kestose decreased at higher temperatures (5–50°C). Therefore enzyme assays were performed at 0°C. The same fructan oligosaccharides, with a distribution similar to that observed in vivo, were obtained upon incubation of the enzyme with sucrose and commercial chicory root inulin.Abbreviations Con A concanavalin A - DP degree of polymerization - FFT fructan: fructan fructosyl transferase - Fru fructose - Glc glucose - Kes 1-kestose - MALDI-TOF MS matrix-assisted laser desorption ionisation time of flight mass spectrometry - Nys 1,1-nystose - pI isoelectric point - SST sucrose: sucrose fructosyl transferase - Suc sucrose The authors would like to thank E. Nackaerts for valuable assistance. W. Van den Ende is also grateful to the National Fund for Scientific Research (NFSR Belgium) for giving a grant for research assistants. P. Verhaert is a research associate of the NFSR. This work was also supported by grant OT/91/18 from the Research Fund K.U. Leuven.     

Genetic Predisposition and its Heredity in the Context of Increased Prevalence of Dermatophytoses

Mycopathologia - Dermatophytosis is a widespread disease with high prevalence and a substantial economic burden associated with costs of treatment. The pattern of this infectious disease covers a...     

Top-Down Lipidomics Reveals Ether Lipid Deficiency in Blood Plasma of Hypertensive Patients

Background

Dyslipoproteinemia, obesity and insulin resistance are integrative constituents of the metabolic syndrome and are major risk factors for hypertension. The objective of this study was to determine whether hypertension specifically affects the plasma lipidome independently and differently from the effects induced by obesity and insulin resistance.

Methodology/Principal Findings

We screened the plasma lipidome of 19 men with hypertension and 51 normotensive male controls by top-down shotgun profiling on a LTQ Orbitrap hybrid mass spectrometer. The analysis encompassed 95 lipid species of 10 major lipid classes. Obesity resulted in generally higher lipid load in blood plasma, while the content of tri- and diacylglycerols increased dramatically. Insulin resistance, defined by HOMA-IR >3.5 and controlled for BMI, had little effect on the plasma lipidome. Importantly, we observed that in blood plasma of hypertensive individuals the overall content of ether lipids decreased. Ether phosphatidylcholines and ether phosphatidylethanolamines, that comprise arachidonic (20∶4) and docosapentaenoic (22∶5) fatty acid moieties, were specifically diminished. The content of free cholesterol also decreased, although conventional clinical lipid homeostasis indices remained unaffected.

Conclusions/Significance

Top-down shotgun lipidomics demonstrated that hypertension is accompanied by specific reduction of the content of ether lipids and free cholesterol that occurred independently of lipidomic alterations induced by obesity and insulin resistance. These results may form the basis for novel preventive and dietary strategies alleviating the severity of hypertension.     

Dendritic cell-derived IL-12p40 homodimer contributes to susceptibility in cutaneous leishmaniasis in BALB/c mice

Protection against Leishmania major in resistant C57BL/6 mice is mediated by Th1 cells, whereas susceptibility in BALB/c mice is the result of Th2 development. IL-12 release by L. major-infected dendritic cells (DC) is critically involved in differentiation of Th1 cells. Previously, we reported that strain differences in the production of DC-derived factors, e.g., IL-1alphabeta, are in part responsible for disparate disease outcome. In the present study, we analyzed the release of IL-12 from DC in more detail. Stimulated DC from C57BL/6 and BALB/c mice released comparable amounts of IL-12p40 and p70. In the absence of IL-4, BALB/c DC produced significantly more IL-12p40 than C57BL/6 DC. Detailed analyses by Western blot and ELISA revealed that one-tenth of IL-12p40 detected in DC supernatants was released as the IL-12 antagonist IL-12p40 homodimer (IL-12p80). BALB/c DC released approximately 2-fold more IL-12p80 than C57BL/6 DC both in vitro and in vivo. Local injection of IL-12p80 during the first 3 days after infection resulted in increased lesion volumes for several weeks in both L. major-infected BALB/c or C57BL/6 mice, in higher lesional parasite burdens, and decreased Th1-cytokine production. Finally, IL-12p40-transgenic C57BL/6 mice characterized by overexpression of p40 showed increased levels of serum IL-12p80 and enhanced disease susceptibility. Thus, in addition to IL-1alphabeta, strain-dependent differences in the release of other DC-derived factors such as IL-12p80 may influence genetically determined disease outcome.