Effect of hydrophobicity degree of polymer particles on lipase immobilization and on biocatalyst performance

Abstract

Many studies describe the advantages of using hydrophobic particles on lipase immobilisation. However, many of these works neglect the effect of other variables of the supports, such as specific area and porosity, on the biocatalyst performance, and do not evaluate the influence of the hydrophobicity level of the particles on the biocatalysts’ activity as a single variable. Thus, the focus of the present work was to evaluate the effect of the hydrophobicity degree of polymeric particles on the biocatalysts’ activities, mitigating the influence of other variables. The study was divided into two steps. Firstly, distinct particles, exhibiting different composition and hydrophobicity levels, were used for the immobilization of a commercial lipase B from Candida antarctica (CAL-B). Then, distinct core-shell polymeric particles presenting different functional compounds on the surface were produced, using as comonomers styrene, divinylbenzene, 1-octene, vinylbenzoate and cardanol. Such particles were subsequently used for CAL-B immobilisation and the performance of the biocatalysts was evaluated on hydrolysis (using p-nitrophenyl laurate, as substrate) and esterification (using ethanol and oleic acid, as substrate) reactions. Based on the screening step, it was observed that for non-porous particles the correlation coefficients between the hydrophobicity level of the supports and the biocatalysts performance, for both hydrolysis and esterification reactions, were very low (0.32 and 0.45, respectively). It highlights that there was no significant correlation between these variables and that, probably, the chemical composition of the polymeric chains affects more significantly the biocatalyst performance. Then, analysing the subsequent stage, it was observed that small changes in the surface composition of the core-shell particles result in significant changes on the textural properties of the supports (specific area ranging from 1.2?m².g^?1 to 18.3?m².g^?1; and contact angles ranging from 71° (hydrophilic particles) to 92° (hydrophobic supports) when polymer films were put in contact with water). Such particles were also employed on CAL-B immobilization and it was noticed that higher correlation coefficients were achieved for hydrolysis (ρ?=?0.53) and esterification (ρ?=?0.74) reactions. Therefore, it is shown that the hydrophobicity degree of such supports starts to affect more effectively the biocatalysts performance when other textural features of the supports become more significant, such as specific area and porosity.     

Development of a 3D Tissue‐Engineered Skeletal Muscle and Bone Co‐culture System

In vitro 3D tissue‐engineered (TE) structures have been shown to better represent in vivo tissue morphology and biochemical pathways than monolayer culture, and are less ethically questionable than animal models. However, to create systems with even greater relevance, multiple integrated tissue systems should be recreated in vitro. In the present study, the effects and conditions most suitable for the co‐culture of TE skeletal muscle and bone are investigated. High‐glucose Dulbecco's modified Eagle medium (HG‐DMEM) supplemented with 20% fetal bovine serum followed by HG‐DMEM with 2% horse serum is found to enable proliferation of both C2C12 muscle precursor cells and TE85 human osteosarcoma cells, fusion of C2C12s into myotubes, as well as an upregulation of RUNX2/CBFa1 in TE85s. Myotube formation is also evident within indirect contact monolayer cultures. Finally, in 3D co‐cultures, TE85 collagen/hydroxyapatite constructs have significantly greater expression of RUNX2/CBFa1 and osteocalcin/BGLAP in the presence of collagen‐based C2C12 skeletal muscle constructs; however, fusion within these constructs appears reduced. This work demonstrates the first report of the simultaneous co‐culture and differentiation of 3D TE skeletal muscle and bone, and represents a significant step toward a full in vitro 3D musculoskeletal junction model.     

Synergistic effects of habitat configuration and land-use intensity shape the structure of bird assemblages in human-modified landscapes across three major neotropical biomes

Maximizing biodiversity persistence in heterogeneous human-modified landscapes is hindered by the complex interactions between habitat quality and configuration of native and non-native habitats. Here we examined these complex interactions considering avian diversity across 26 sampling sites, each of which comprised of three sampling points located across a gradient of disturbance: core native habitat fragment, fragment edge, and non-native adjacent matrix. The 78 sampling points were further nested within three neotropical biomes—Amazonia, Cerrado and Pantanal—in central-western Brazil. Matrix type consisted of cattle pastures in the Amazon and teak plantations in the Pantanal and Cerrado. We considered the interactive effects of (1) disturbance-context: fragment core, edge and adjacent matrix, (2) matrix type: tree plantation or cattle pastures, both subject to varying land-use intensity, and (3) native habitat configuration (fragment size, shape and isolation) on bird species richness, abundance and composition. Based on point-count surveys, we recorded 210 bird species. Bird species richness and abundance declined across the disturbance gradient, while genus composition only differed within the adjacent matrix, particularly cattle-pastures. The effect of native habitat area was positive but only detected at fragment edges. Overall bird diversity increased at sites characterized by higher availability of either relict trees within pasture landscapes or old-growth trees within teak plantation landscapes. The core of native fragments played a primary role in ensuring the persistence of bird diversity, regardless of fragment size. In contrast to pastures, tree plantations likely harbour a higher proportion of forest-dependent species while bird diversity can be further enhanced by reduced management intensity in both matrix types. Strategies to maximize avian persistence should not only include retaining native habitats, but also maximizing the size of core native habitats. Likewise, more structurally complex matrix types should be encouraged while maintaining low levels of land-use intensity.

     

Mechanics of the maxillary central incisor. Influence of the periodontal ligament represented by beam elements

This study aimed to evaluate the influence of loading on a maxillary central incisor with the periodontal ligament (PDL) represented by 2D elastic beam elements using a 2D finite element analysis. Two models (M) were built varying the PDL representation: Mh (homogeneous PDL) and Mht (heterogeneous PDL with beam3 elements). Stress and displacements were determined for three loading conditions (L): Ll, lingual face loading at 45° with the tooth long axis; Li, perpendicular to the incisal edge; and Lip, on the incisal edge, parallel to the tooth long axis. Evaluation was performed on ANSYS software. Lip provided lower stress variation on the tooth and support structures when compared to Ll and Li. PDL's influence on stress values was lower for Lip. Oblique loading showed stress and displacement not observed in parallel loading condition through PDL's heterogeneous representation and it is probably incompatible with the in vivo condition.     

Comparison of PCR protocols for detecting Histoplasma capsulatum DNA through a multicenter study

BackgroundA multicenter study was conducted. A panel containing DNA from Histoplasma capsulatum, as well as negative and cross-reaction controls, was sent to five different laboratories, members of the MICOMOL network from CYTED Program.AimsThe objective was to assess the accuracy of different PCR protocols to detect H. capsulatum DNA.MethodsSeven different PCR protocols were tested. They were based on PCR techniques and used unicopy and multicopy targets.ResultsMost of these protocols (4/7) were able to detect the smallest amounts of fungal DNA (10² fg/μl). Overall sensitivity was 86% and specificity was 100%. The protocol based on a unicopy target (SCAR₂₂₀) presented lower sensitivity (43%) but 100% specificity. The real-time protocols tested were highly reproducible, sensitive, and specific. Neither false positives nor cross-reactions were detected in any protocol.ConclusionsAll laboratories were able to amplify H. capsulatum DNA, and real-time PCR seems to be a promising tool to efficiently detect this pathogen in clinical samples.     

The broader evolutionary lessons to be learned from a comparative and phylogenetic analysis of primate muscle morphology

The present publication reviews the broader evolutionary implications of our long‐term study of primate musculature. It summarizes the implications of the study for our understanding of the use of myological characters for phylogenetic reconstruction, for assessing the importance of homoplasy and reversions in evolution, and for our understanding of Dollo's law, the notion of ‘direction’ in evolution, the common myth of human complexity, the tempo and mode of primate and human evolutionary history, adaptive radiations, the notion that ‘common’ equals ‘primitive’ and the influence of morphogenesis on the variability of head, neck, pectoral and upper limb muscles. Among other results our study shows that myological characters are useful for phylogenetic reconstruction. The results also stress the importance of homoplasy and of evolutionary reversions in morphological evolution, and they provide examples of reversions that violate Dollo's law due to the retention of ancestral developmental pathways. They also show that contrary to the idea of a ‘general molecular slow‐down of hominoids’ the rates of muscle evolution at the nodes leading to and within the hominoid clade are higher than those in most other primate clades. However, there is no evidence of a general trend or ‘directionality’ towards an increasing complexity during the evolutionary history of hominoids and of modern humans in particular, at least regarding the number of muscles or of muscle bundles. The rates of muscle evolution at the major euarchontan and primate nodes are different, but within each major primate clade (Strepsirrhini, Platyrrhini, Cercopithecidae and Hominoidea) the rates at the various nodes, and particularly at the nodes leading to the higher groups (i.e. those including more than one genus) are strikingly similar. Our results also support, in general terms, the assumption that ‘common is primitive’ and they lend some support for the ‘vertebrate‐specific model’ in the sense that during the divergent events that resulted in these four major primate clades there was more emphasis on postcranial changes than on cranial changes. Our study of primates does not, however, support suggestions that the distal structures of the upper limb are more prone to variation than the proximal ones, or that the topological origins of the upper limb muscles are more prone to evolutionary change than their insertions.     

Cost-Effectiveness of Quantiferon?-TB Gold-In-Tube Versus Tuberculin Skin Testing for Contact Screening and Treatment of Latent Tuberculosis Infection in Brazil

Background

Latent tuberculosis infection (LTBI) is a reservoir for new TB cases. Isoniazid preventive therapy (IPT) reduces the risk of active TB by as much as 90%, but LTBI screening has limitations. Unlike tuberculin skin testing (TST), interferon-gamma release assays are not affected by BCG vaccination, and have been reported to be cost-effective in low-burden countries. The goal of this study was to perform a cost-effectiveness analysis from the health system perspective, comparing three strategies for LTBI diagnosis in TB contacts: tuberculin skin testing (TST), QuantiFERON®-TB Gold-in-Tube (QFT-GIT) and TST confirmed by QFT-GIT if positive (TST/QFT-GIT) in Brazil, a middle-income, high-burden country with universal BCG coverage.

Methodology/Principal Findings

Costs for LTBI diagnosis and treatment of a hypothetical cohort of 1,000 adult immunocompetent close contacts were considered. The effectiveness measure employed was the number of averted TB cases in two years. Health system costs were US$ 105,096 for TST, US$ 121,054 for QFT-GIT and US$ 101,948 for TST/QFT-GIT; these strategies averted 6.56, 6.63 and 4.59 TB cases, respectively. The most cost-effective strategy was TST (US$ 16,021/averted case). The incremental cost-effectiveness ratio was US$ 227,977/averted TB case for QFT-GIT. TST/QFT-GIT was dominated.

Conclusions

Unlike previous studies, TST was the most cost-effective strategy for averting new TB cases in the short term. QFT-GIT would be more cost-effective if its costs could be reduced to US$ 26.95, considering a TST specificity of 59% and US$ 18 considering a more realistic TST specificity of 80%. Nevertheless, with TST, 207.4 additional people per 1,000 will be prescribed IPT compared with QFT.     

The Use of a Combination of alkB Primers to Better Characterize the Distribution of Alkane-Degrading Bacteria

The alkane monooxygenase AlkB, which is encoded by the alkB gene, is a key enzyme involved in bacterial alkane degradation. To study the alkB gene within bacterial communities, researchers need to be aware of the variations in alkB nucleotide sequences; a failure to consider the sequence variations results in the low representation of the diversity and richness of alkane-degrading bacteria. To minimize this shortcoming, the use of a combination of three alkB-targeting primers to enhance the detection of the alkB gene in previously isolated alkane-degrading bacteria was proposed. Using this approach, alkB-related PCR products were detected in 79% of the strains tested. Furthermore, the chosen set of primers was used to study alkB richness and diversity in different soils sampled in Carmópolis, Brazil and King George Island, Antarctica. The DNA extracted from the different soils was PCR amplified with each set of alkB-targeting primers, and clone libraries were constructed, sequenced and analyzed. A total of 255 alkB phylotypes were detected. Venn diagram analyses revealed that only low numbers of alkB phylotypes were shared among the different libraries derived from each primer pair. Therefore, the combination of three alkB-targeting primers enhanced the richness of alkB phylotypes detected in the different soils by 45% to 139%, when compared to the use of a single alkB-targeting primer. In addition, a dendrogram analysis and beta diversity comparison of the alkB composition showed that each of the sampling sites studied had a particular set of alkane-degrading bacteria. The use of a combination of alkB primers was an efficient strategy for enhancing the detection of the alkB gene in cultivable bacteria and for better characterizing the distribution of alkane-degrading bacteria in different soil environments.     

Advantageous Direct Quantification of Viable Closely Related Probiotics in Petit-Suisse Cheeses under In Vitro Gastrointestinal Conditions by Propidium Monoazide - qPCR

Species-specific Quantitative Real Time PCR (qPCR) alone and combined with the use of propidium monoazide (PMA) were used along with the plate count method to evaluate the survival of the probiotic strains Lactobacillus acidophilus La-5 and Bifidobacterium animalis subsp. lactis Bb-12, and the bacteriocinogenic and potentially probiotic strain Lactobacillus sakei subsp. sakei 2a in synbiotic (F1) and probiotic (F2) petit-suisse cheeses exposed throughout shelf-life to in vitro simulated gastrointestinal tract conditions. The three strains studied showed a reduction in their viability after the 6 h assay. Bb-12 displayed the highest survival capacity, above 72.6 and 74.6% of the initial populations, respectively, by plate count and PMA-qPCR, maintaining population levels in the range or above 6 log CFU/g. The prebiotic mix of inulin and FOS did not offer any additional protection for the strains against the simulated gastrointestinal environment. The microorganisms'' populations were comparable among the three methods at the initial time of the assay, confirming the presence of mainly viable and culturable cells. However, with the intensification of the stress induced throughout the various stages of the in vitro test, the differences among the methods increased. The qPCR was not a reliable enumeration method for the quantification of intact bacterial populations, mixed with large numbers of injured and dead bacteria, as confirmed by the scanning electron microscopy results. Furthermore, bacteria plate counts were much lower (P<0.05) than with the PMA-qPCR method, suggesting the accumulation of stressed or dead microorganisms unable to form colonies. The use of PMA overcame the qPCR inability to differentiate between dead and alive cells. The combination of PMA and species-specific qPCR in this study allowed a quick and unequivocal way of enumeration of viable closely related species incorporated into probiotic and synbiotic petit-suisse cheeses and under stress conditions.