A comparative evaluation of five typing techniques for determining the diversity of fluorescent pseudomonads

Five typing methods were evaluated, utilising 63 strains of fluorescent pseudomonads, to assess their usefulness as tools to study the bacterial diversity within this complex group. The methods used were Biolog metabolic profiling, restriction fragment length polymorphism ribotyping, PCR ribotyping, and repetitive element sequence-based PCR (rep-PCR) utilising BOX and enterobacterial repetitive intergenic consensus (ERIC) primers. Cluster analysis of the results clearly demonstrated the considerable homogeneity of Pseudomonas aeruginosa isolates and, conversely, the heterogeneity within the other species, in particular P. putida and P. fluorescens, which need further taxonomic investigation. Biolog metabolic profiling enabled the best differentiation among the species. Rep-PCR proved to be highly discriminatory, more so than the other DNA fingerprinting techniques, demonstrating its suitability for the analysis of highly clonal isolates. RFLP ribotyping, PCR ribotyping, and rep-PCR produced specific clusters of P. aeruginosa isolates, which corresponded to their origins of isolation, hence we recommend these methods for intraspecific typing of bacteria.     

Postactivation potentiation response in athletic and recreationally trained individuals

To determine if training status directly impacted the response to postactivation potentiation, athletes in sports requiring explosive strength (ATH; n = 7) were compared to recreationally trained (RT; n = 17) individuals. Over the course of 4 sessions, subjects performed rebound and concentric-only jump squats with 30%, 50%, and 70% 1 RM loads. Jump squats were performed 5 minutes and 18.5 minutes following control or heavy load warm-ups. Heavy load warm-up consisted of 5 sets of 1 repetition at 90% 1 RM back squat. Jump squat performance was assessed with a force platform and position transducer. Heavy load warm-up did not have an effect on the subjects as a single sample. However, when percent potentiation was compared between ATH and RT groups, force and power parameters were significantly greater for ATH (p < 0.05). Postactivation potentiation may be a viable method of acutely enhancing explosive strength performance in athletic but not recreationally trained individuals. Reference Data: Chiu, L.Z.F., A.C. Fry, L.W. Weiss, B.K. Schilling, L.E. Brown, and S.L. Smith. Postactivation potentiation response in athletic and recreationally trained individuals.     

Nek2A kinase stimulates centrosome disjunction and is required for formation of bipolar mitotic spindles

Nek2A is a cell cycle-regulated kinase of the never in mitosis A (NIMA) family that is highly enriched at the centrosome. One model for Nek2A function proposes that it regulates cohesion between the mother and daughter centriole through phosphorylation of C-Nap1, a large coiled-coil protein that localizes to centriolar ends. Phosphorylation of C-Nap1 at the G2/M transition may trigger its displacement from centrioles, promoting their separation and subsequent bipolar spindle formation. To test this model, we generated tetracycline-inducible cell lines overexpressing wild-type and kinase-dead versions of Nek2A. Live cell imaging revealed that active Nek2A stimulates the sustained splitting of interphase centrioles indicative of loss of cohesion. However, this splitting is accompanied by only a partial reduction in centriolar C-Nap1. Strikingly, induction of kinase-dead Nek2A led to formation of monopolar spindles with unseparated spindle poles that lack C-Nap1. Furthermore, kinase-dead Nek2A interfered with chromosome segregation and cytokinesis and led to an overall change in the DNA content of the cell population. These results provide the first direct evidence in human cells that Nek2A function is required for the correct execution of mitosis, most likely through promotion of centrosome disjunction. However, they suggest that loss of centriole cohesion and C-Nap1 displacement may be distinct mitotic events.     

Effect of knee position on hip and knee torques during the barbell squat

Some recommendations suggest keeping the shank as vertical as possible during the barbell squat, thus keeping the knees from moving past the toes. This study examined joint kinetics occurring when forward displacement of the knees is restricted vs. when such movement is not restricted. Seven weight-trained men (mean +/- SD; age = 27.9 +/- 5.2 years) were videotaped while performing 2 variations of parallel barbell squats (barbell load = body weight). Either the knees were permitted to move anteriorly past the toes (unrestricted) or a wooden barrier prevented the knees from moving anteriorly past the toes (restricted). Differences resulted between static knee and hip torques for both types of squat as well as when both squat variations were compared with each other (p < 0.05). For the unrestricted squat, knee torque (N.m; mean +/- SD) = 150.1 +/- 50.8 and hip torque = 28.2 +/- 65.0. For the restricted squat, knee torque = 117.3 +/- 34.2 and hip torque = 302.7 +/- 71.2. Restricted squats also produced more anterior lean of the trunk and shank and a greater internal angle at the knees and ankles. The squat technique used can affect the distribution of forces between the knees and hips and on the kinematic properties of the exercise. PRACTICAL APPLICATIONS: Although restricting forward movement of the knees may minimize stress on the knees, it is likely that forces are inappropriately transferred to the hips and low-back region. Thus, appropriate joint loading during this exercise may require the knees to move slightly past the toes.     

Arginine deprivation and tumour cell death: Arginase and its inhibition

Arginase treatment of cell cultures reduced arginine in the medium to ~ micromolar levels within 5–30 min, and proved as effective as arginine-free medium (AFM) prepared by formulation. The enzyme was heat stable and as active at pH 7.2 as at pH 9.9. It persisted in culture for at least 3 days with only a small diminution in its speed of action, and still actively destroyed arginine after 6 days, since arginine supplementation failed to rescue viable cells.Addition of L-norvaline, an inhibitor of arginase, rescued cells from arginase-induced deprivation. Its efficacy at low concentrations was short-lived (probably < 1 day), while at higher concentrations it did not appear to inhibit completely the enzyme. However, L-norvaline at these same levels also slowed the growth of positive non-enzyme treated controls receiving the normal arginine levels. Thus the difference in this growth indicated that arginase was more inhibitory than cursory examination of initial kinetic data suggested. It also agreed with the inhibition of arginase in the ornithine assay used to measure biochemically enzyme activity. We conclude that norvaline partially but not completely antagonises arginase activity, which allows cell rescue in a dose-dependent manner between 0.4 and 4 mM, but cannot be used above about 2 mM without exhibiting a general non-specific interference of cell growth of its own, although no evidence of cell toxicity was observed in either AFM or arginine-containing medium. L-ornithine, the product of arginase that inhibits the enzyme by a feedback mechanism, had no inhibitory effect on arginase over a similar concentration range.     

Stochastic description of the ligand-receptor interaction of biologically active substances at extremely low doses

Signalling molecules can be effective at extraordinarily low concentrations (down to attomolar levels). To handle such cases, probabilistic methods have been used to describe the formal kinetics of action of biologically active substances in these low doses, although it has been necessary to review what is meant by such a term. The mean numbers of transformed/degraded molecules and their dispersions were calculated for the possible range of ligand-receptor binding schemes. We used both analytical equations and numerical simulations to calculate the coefficients of variation (ratio of standard deviation to mean) and demonstrated that the distribution of the coefficient is highly dependent on the reaction scheme. It may, therefore, be used as an additional factor for discriminating between cooperative and noncooperative models of ligand-receptor interaction over extreme ranges of ligand dilution. The relevance to signalling behaviour is discussed.     

Lipoprotein lipase- and hepatic triglyceride lipase- promoted very low density lipoprotein degradation proceeds via an apolipoprotein E-dependent mechanism

Apolipoprotein E (apoE) is the primary recognition signal on triglyceride-rich lipoproteins responsible for interacting with low density lipoprotein (LDL) receptors and LDL receptor-related protein (LRP). It has been shown that lipoprotein lipase (LPL) and hepatic triglyceride lipase (HTGL) promote receptor-mediated uptake and degradation of very low density lipoproteins (VLDL) and remnant particles, possibly by directly binding to lipoprotein receptors. In this study we have investigated the requirement for apoE in lipase-stimulated VLDL degradation. We compared binding and degradation of normal and apoE-depleted human VLDL and apoE knockout mouse VLDL in human foreskin fibroblasts. Surface binding at 37 degrees C of apoE knockout VLDL was greater than that of normal VLDL by 3- and 40-fold, respectively, in the presence of LPL and HTGL. In spite of the greater stimulation of surface binding, lipase-stimulated degradation of apoE knockout mouse VLDL was significantly lower than that of normal VLDL (30, 30, and 80%, respectively, for control, LPL, and HTGL treatments). In the presence of LPL and HTGL, surface binding of apoE-depleted human VLDL was, respectively, 40 and 200% of normal VLDL whereas degradation was, respectively, 25 and 50% of normal VLDL. LPL and HTGL stimulated degradation of normal VLDL in a dose-dependent manner and by a LDL receptor-mediated pathway. Maximum stimulation (4-fold) was seen in the presence LPL (1 microgram/ml) or HTGL (3 microgram/ml) in lovastatin-treated cells. On the other hand, degradation of apoE-depleted VLDL was not significantly increased by the presence of lipases even in lovastatin-treated cells. Surface binding of apoE-depleted VLDL to metabolically inactive cells at 4 degrees C was higher in control and HTGL-treated cells, but unchanged in the presence of LPL. Degradation of prebound apoE-depleted VLDL was only 35% as efficient as that of normal VLDL. Surface binding of apoE knockout or apoE-depleted VLDL was to heparin sulfate proteoglycans because it was completely abolished by heparinase treatment. However, apoE appears to be a primary determinant for receptor-mediated VLDL degradation.Our studies suggest that overexpression of LPL or HTGL may not protect against lipoprotein accumulation seen in apoE deficiency.     

Modeling conductive heat transfer and process uniformity during batch high-pressure processing of foods

A numerical model for predicting conductive heat transfer during batch high hydrostatic pressure (HHP) processing of foods was developed and tested for a food simulator (agar gel). For a comprehensive evaluation of the proposed method, both "conventional" HHP processes, HHP processes with gradual, step-by-step pressure buildup and pressure release, and pressure cycling HHP processes were included. In all cases, good agreement between experimental and predicted temperature profiles was observed. The model provides a very useful tool to evaluate batch HHP processes in terms of uniformity of any heat- and/or pressure-related effect. This is illustrated for inactivation of Bacillus subtilis alpha-amylase, an enzymatic model system with known pressure-temperature degradation kinetics.