Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor

Refractive index (RI) sensing is a powerful noninvasive and label-free sensing technique for the identification, detection and monitoring of microfluidic samples with a wide range of possible sensor designs such as interferometers and resonators ^1,2. Most of the existing RI sensing applications focus on biological materials in aqueous solutions in visible and IR frequencies, such as DNA hybridization and genome sequencing. At terahertz frequencies, applications include quality control, monitoring of industrial processes and sensing and detection applications involving nonpolar materials.Several potential designs for refractive index sensors in the terahertz regime exist, including photonic crystal waveguides ³, asymmetric split-ring resonators ⁴, and photonic band gap structures integrated into parallel-plate waveguides ⁵. Many of these designs are based on optical resonators such as rings or cavities. The resonant frequencies of these structures are dependent on the refractive index of the material in or around the resonator. By monitoring the shifts in resonant frequency the refractive index of a sample can be accurately measured and this in turn can be used to identify a material, monitor contamination or dilution, etc.The sensor design we use here is based on a simple parallel-plate waveguide ^6,7. A rectangular groove machined into one face acts as a resonant cavity (Figures 1 and 2). When terahertz radiation is coupled into the waveguide and propagates in the lowest-order transverse-electric (TE₁) mode, the result is a single strong resonant feature with a tunable resonant frequency that is dependent on the geometry of the groove ^6,8. This groove can be filled with nonpolar liquid microfluidic samples which cause a shift in the observed resonant frequency that depends on the amount of liquid in the groove and its refractive index ⁹.Our technique has an advantage over other terahertz techniques in its simplicity, both in fabrication and implementation, since the procedure can be accomplished with standard laboratory equipment without the need for a clean room or any special fabrication or experimental techniques. It can also be easily expanded to multichannel operation by the incorporation of multiple grooves ¹⁰. In this video we will describe our complete experimental procedure, from the design of the sensor to the data analysis and determination of the sample refractive index.     

Evidence for a vertebrate catapult: elastic energy storage in the plantaris tendon during frog jumping

Anuran jumping is one of the most powerful accelerations in vertebrate locomotion. Several species are hypothesized to use a catapult-like mechanism to store and rapidly release elastic energy, producing power outputs far beyond the capability of muscle. Most evidence for this mechanism comes from measurements of whole-body power output; the decoupling of joint motion and muscle shortening expected in a catapult-like mechanism has not been demonstrated. We used high-speed marker-based biplanar X-ray cinefluoroscopy to quantify plantaris muscle fascicle strain and ankle joint motion in frogs in order to test for two hallmarks of a catapult mechanism: (i) shortening of fascicles prior to joint movement (during tendon stretch), and (ii) rapid joint movement during the jump without rapid muscle-shortening (during tendon recoil). During all jumps, muscle fascicles shortened by an average of 7.8 per cent (54% of total strain) prior to joint movement, stretching the tendon. The subsequent period of initial joint movement and high joint angular acceleration occurred with minimal muscle fascicle length change, consistent with the recoil of the elastic tendon. These data support the plantaris longus tendon as a site of elastic energy storage during frog jumping, and demonstrate that catapult mechanisms may be employed even in sub-maximal jumps.     

Allium ampeloprasum var. babingtonii (Alliaceae): an isoclonal plant found across a range of habitats in S.W. England

Despite the widespread distribution and common habitat dominance of clonal plant species the mechanisms for their ecological success often remain uncertain. Allium ampeloprasum var. babingtonii is a sterile plant that reproduces with physiologically independent asexual propagules. The variety is found mainly in the S.W. of England over a wide habitat range including sea cliffs and open woodlands and displays an autumn-spring phenology in common with its close Mediterranean relatives. The role of population genetic structure in the remarkable habitat distribution of the variety is not known. Genetic variation in A. ampeloprasum var. babingtonii was analysed using RAPD markers in single individuals of var. babingtonii from 16 distinct populations and five further individuals from a single population. This analysis revealed no polymorphism suggesting that all sampled individuals are part of a single clone. We offer the conjecture that in the absence of genetic variation an ecological release, due to temporal separation from competing species, may contribute to the ability of var. babingtonii to exploit heterogeneous environmental conditions.     

Distinctive communication networks in inactive states of β2-adrenergic receptor: Mutual information and entropy transfer analysis

Mutual information and entropy transfer analysis employed on two inactive states of human beta-2 adrenergic receptor (β₂-AR) unraveled distinct communication pathways. Previously, a so-called “highly” inactive state of the receptor was observed during 1.5 microsecond long molecular dynamics simulation where the largest intracellular loop (ICL3) was swiftly packed onto the G-protein binding cavity, becoming entirely inaccessible. Mutual information quantifying the degree of correspondence between backbone-C_α fluctuations was mostly shared between intra- and extra-cellular loop regions in the original inactive state, but shifted to entirely different regions in this latest inactive state. Interestingly, the largest amount of mutual information was always shared among the mobile regions. Irrespective of the conformational state, polar residues always contributed more to mutual information than hydrophobic residues, and also the number of polar-polar residue pairs shared the highest degree of mutual information compared to those incorporating hydrophobic residues. Entropy transfer, quantifying the correspondence between backbone-C_α fluctuations at different timesteps, revealed a distinctive pathway directed from the extracellular site toward intracellular portions in this recently exposed inactive state for which the direction of information flow was the reverse of that observed in the original inactive state where the mobile ICL3 and its intracellular surroundings drove the future fluctuations of extracellular regions.     

The Glc7 phosphatase subunit of the cleavage and polyadenylation factor is essential for transcription termination on snoRNA genes

Glc7, the yeast protein phosphatase 1, is a component of the cleavage and polyadenylation factor (CPF). Here we show that downregulation of Glc7, or its dissociation from CPF in the absence of CPF subunits Ref2 or Swd2, results in similar snoRNA termination defects. Overexpressing a C-terminal fragment of Sen1, a superfamily I helicase required for snoRNA termination, suppresses the growth and termination defects associated with loss of Swd2 or Ref2, but not Glc7. Suppression by Sen1 requires nuclear localization and direct interaction with Glc7, which can dephosphorylate Sen1 in vitro. The suppressing fragment, and in a similar manner full-length Sen1, copurifies with the snoRNA termination factors Nrd1 and Nab3, suggesting loss of Glc7 from CPF can be compensated by recruiting Glc7 to Nrd1-Nab3 through Sen1. Swd2 is also a subunit of the Set1c histone H3K4 methyltransferase complex and is required for its stability and optimal methyltransferase activity.     

Seroprevalence of Borrelia burgdorferi infection among forestry workers and farmers in Duzce, north-western Turkey

Borrelia burgdorferi infection is the most frequent tick-transmitted disease worldwide. Our aim was to assess the seroprevalence of B. burgdorferi infection among forestry workers and farmers in Duzce, in the north-west region of Turkey. Blood samples from 349 forestry workers and farmers and 193 healthy blood donors were obtained to determine the presence of antibodies to B. burgdorferi. A two-step testing strategy was used; the sera were initially tested by ELISA and then by Western blot (WB) IgG. Demographic data regarding residence, age, gender, profession, tick bite history, contact with animals, and symptoms involving the skin, nervous system, and osteoarticular system were collected by questionnaire. All results were evaluated statistically using the chi2 test. The seroprevalence of B. burgdorferi was 10.9% (n=38) in forestry workers and farmers and 2.6% (n=5) in blood donors by ELISA, with a statistically significant difference (p<0.001). Seropositivity rates were related to age, gender, and common risk factors for the disease. IgG seropositivity was confirmed in four (1.1%) sera by WB. In this first seroepidemiological report from the northwest region of Turkey, tick bite exposure was found to be high, whereas B. burgdorferi infection was not common. Preventive measures against tick exposure and further studies to determine the distribution of Lyme disease in Turkey are proposed.     

Effect of Thiolated Polymers to Textural and Mucoadhesive Properties of Vaginal Gel Formulations Prepared with Polycarbophil and Chitosan

The aim of this study was to design and evaluate of mucoadhesive gel formulations for the vaginal application of clomiphene citrate (CLM) for local treatment of human papilloma virus (HPV) infections. Chitosan (CHI) and polycarbophil (PC) were covalently modified using the thioglycolic acid and L-cysteine, respectively. The formation of thiol conjugates of chitosan (CHI-TG) and polycarbophil (PC-CYS) were confirmed by FT-IR analysis and PC-CYS and CHI-TG were found to have 148.42 ± 4.16 and 41.17 ± 2.34 μmol of thiol groups per gram of polymer, respectively. One percent CLM gels were prepared by combination of various concentrations of PC and CHI with thiolated conjugates of these polymers. Hardness, compressibility, elasticity, adhesiveness and cohesiveness of the gels were measured by Texture profile analysis and the vaginal mucoadhesion was investigated by mucoadhesion test. The increasing in the amount of the thiol conjugates was found to enhance the elasticity, cohesiveness, adhesiveness and mucoadhesion of the gel formulations but not their hardness and compressibility when compared to gels prepared using their respective parent formulations. Slower release rate of CLM from gels was achieved when the polymer concentrations were increased in the gel formulations. PC and its thiol conjugate were found to prolong the release of CLM longer than 70 h unlike gel formulations prepared using CHI and its thiol conjugate which were able to release CLM up to 12 h. Stability of CLM was preserved during the 3 month stability analysis under controlled room temperature and accelerated conditions.     

Anaerobic Biodegradation of Poly-3-Hydroxybutyrate (PHB) by Sulfate Reducing Bacterium Desulfotomaculum sp.

Poly-3-hydroxybutyrate (PHB) film pieces were degraded by sulfate reducing Desulfotomaculum sp. incubated under anaerobic laboratory conditions. Degradation started with adherence of the microbial cells and followed by formation of black colonies on the film surface. Scanning electron microscopic (SEM) observations revealed the presence of bacteria and formation of small holes on the film. After 60 days of incubation at 30°C, 10 % weight loss in polymer and 13 % sulfate reduction in the medium was observed. According to gel permeation chromatography (GPC) analysis, the molecular weight of the PHB decreased after 30 days and did not decrease further at a more extended incubation period. Loss of weight of PHB does not seem to be correlated with molecular weight decrease.