High‐Performance and Stable All‐Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption

To explore the advantages of emerging all‐polymer solar cells (all‐PSCs), growing efforts have been devoted to developing matched donor and acceptor polymers to outperform fullerene‐based PSCs. In this work, a detailed characterization and comparison of all‐PSCs using a set of donor and acceptor polymers with both conventional and inverted device structures is performed. A simple method to quantify the actual composition and light harvesting contributions from the individual donor and acceptor is described. Detailed study on the exciton dissociation and charge recombination is carried out by a set of measurements to understand the photocurrent loss. It is unraveled that fine‐tuned crystallinity of the acceptor, matched donor and acceptor with complementary absorption and desired energy levels, and device architecture engineering can synergistically boost the performance of all‐PSCs. As expected, the PBDTTS‐FTAZ:PNDI‐T10 all‐PSC attains a high and stable power conversion efficiency of 6.9% without obvious efficiency decay in 60 d. This work demonstrates that PNDI‐T10 can be a potential alternative acceptor polymer to the widely used acceptor N2200 for high‐performance and stable all‐PSCs.     

Spike-triggered average torque and muscle fiber conduction velocity of low-threshold motor units following submaximal endurance contractions.

The motor unit twitch torque is modified by sustained contraction, but the association to changes in muscle fiber electrophysiological properties is not fully known. Thus twitch torque, muscle fiber conduction velocity, and action potential properties of single motor units were assessed in 11 subjects following an isometric submaximal contraction of the tibialis anterior muscle until endurance. The volunteers activated a target motor unit at the minimum discharge rate in eight 3-min-long contractions, three before and five after an isometric contraction at 40% of the maximal torque, sustained until endurance. Multichannel surface electromyogram signals and joint torque were averaged with the target motor unit potential as trigger. Discharge rate (mean +/- SE, 6.6 +/- 0.2 pulses/s) and interpulse interval variability (33.3 +/- 7.0%) were not different in the eight contractions. Peak twitch torque and recruitment threshold increased significantly (93 +/- 29 and 12 +/- 5%, P <0.05) in the contraction immediately after the endurance task with respect to the preendurance values (0.94 +/- 0.26 mN.m and 3.7 +/- 0.5% of the maximal torque), whereas time to peak of the twitch torque did not change (74.4 +/- 10.1 ms). Muscle fiber conduction velocity decreased and action potential duration increased in the contraction after the endurance (6.3 +/- 1.8 and 9.8 +/- 1.8%, respectively, P <0.05; preendurance values, 3.9 +/- 0.2 m/s and 11.1 +/- 0.8 ms), whereas the surface potential peak-to-peak amplitude did not change (27.1 +/- 3.1 microV). There was no significant correlation between the relative changes in muscle fiber conduction velocity or surface potential duration and in peak twitch torque (R2= 0.04 and 0.10, respectively). In conclusion, modifications in peak twitch torque of low-threshold motor units with sustained contraction are mainly determined by mechanisms not related to changes in action potential shape and in its propagation velocity.     

Challenges and opportunities for photochemists on the verge of solar energy conversion.

Has photochemistry missed the boat on solar energy conversion? Certainly not, but it is time to reach out and make a difference if we do not want to have to choose between feeding our families or our thirst for fuel. Compared to other initiatives, such as biofuels or nuclear fusion, direct conversion of solar energy into electricity or fuels is lagging behind in terms of funding, and this is slowing progress on overcoming critical bottlenecks. This perspective outlines some of the key fundamental issues in solar energy conversion based on organic photovoltaic devices or artificial photosynthesis where being a photochemist can make a difference.     

Collagen-specific T-cell repertoire in blood and synovial fluid varies with disease activity in early rheumatoid arthritis

Introduction  

Type II collagen is a DR4/DR1 restricted target of self-reactive T cells that sustain rheumatoid arthritis. The aim of the present study was to analyze the T-cell receptor repertoire at the onset of and at different phases in rheumatoid arthritis.     

Type IV Secretion-Dependent Activation of Host MAP Kinases Induces an Increased Proinflammatory Cytokine Response to Legionella pneumophila

The immune system must discriminate between pathogenic and nonpathogenic microbes in order to initiate an appropriate response. Toll-like receptors (TLRs) detect microbial components common to both pathogenic and nonpathogenic bacteria, whereas Nod-like receptors (NLRs) sense microbial components introduced into the host cytosol by the specialized secretion systems or pore-forming toxins of bacterial pathogens. The host signaling pathways that respond to bacterial secretion systems remain poorly understood. Infection with the pathogen Legionella pneumophila, which utilizes a type IV secretion system (T4SS), induced an increased proinflammatory cytokine response compared to avirulent bacteria in which the T4SS was inactivated. This enhanced response involved NF-κB activation by TLR signaling as well as Nod1 and Nod2 detection of type IV secretion. Furthermore, a TLR- and RIP2-independent pathway leading to p38 and SAPK/JNK MAPK activation was found to play an equally important role in the host response to virulent L. pneumophila. Activation of this MAPK pathway was T4SS-dependent and coordinated with TLR signaling to mount a robust proinflammatory cytokine response to virulent L. pneumophila. These findings define a previously uncharacterized host response to bacterial type IV secretion that activates MAPK signaling and demonstrate that coincident detection of multiple bacterial components enables immune discrimination between virulent and avirulent bacteria.     

Bisphosphonated fluoroquinolone esters as osteotropic prodrugs for the prevention of osteomyelitis

Osteomyelitis is a difficult to treat bacterial infection of the bone. Delivering antibacterial agents to the bone may overcome the difficulties in treating this illness by effectively concentrating the antibiotic at the site of infection and by limiting the toxicity that may result from systemic exposure to the large doses conventionally used. Using bisphosphonates as osteophilic functional groups, different forms of fluoroquinolone esters were synthesized and evaluated for their ability to bind bone and to release the parent antibacterial agent. Bisphosphonated glycolamide fluoroquinolone esters were found to present a profile consistent with effective and rapid bone binding and efficient release of the active drug moiety. They were assessed for their ability to prevent bone infection in vivo and were found to be effective when the free fluoroquinolones were not.     

Characterization of reproduction-specific genes in a marine bivalve mollusc: influence of maturation stage and sex on mRNA expression

Numerous studies have investigated the reproduction mechanisms in mollusc species at a biochemical and physiological level; few have described these mechanisms at a molecular level, despite great commercial interest in several mollusc species. We investigated genes involved in gonad maturation of the marine scallop Argopecten purpuratus. A cDNA library was made from gonad tissue. After sequence analysis, 418 unique genes were characterized, of these, about 80% were of unknown function. Among the identified sequences, we analyzed the mRNA expression by real-time PCR of 7 genes involved in reproduction mechanisms, either directly: testis-specific serine/threonine-protein kinase (TSSK), vitellogenin (Vg), and spermatogenesis and centriole associated 1 (SCA) or indirectly: calcineurin A (CNA), centrin, RNA-specific adenosine deaminase (ADAR), and cytidine deaminase (CDA). The real-time PCR analyses were conducted on different tissues of mature and immature scallops (testis, ovary, immature gonad, gill, digestive gland and mantle). The genes studied, presented (1) a strong tissue-dependent expression pattern (higher expression in gonad tissues than in all other tissues) and (2) a sex- and maturation-specific expression pattern (except centrin). This is the first time that the expression of specific genes involved in reproduction mechanisms in a marine mollusc has been described at the molecular level.     

Ulminium diluviale Unger : historique de la découverte et nouvelle étude

A fossil tree was discovered during the 16th century at Jáchymov (Bohemia). The wood was first named by Unger, in 1842, Ulminium diluviale. But it belongs to the Lauraceae family and Felix, in 1883, named it Laurinoxylon diluviale. The authors give the history and the geological setting of the area and describe the anatomy of the wood. The diagnosis of the genus Laurinoxylon Felix, 1883. is emended as follows: heteroxylous fossil wood with average sized solitary vessels or in radial groups; perforation plates simple and sometimes scalariform; intervascular pits alternate and moderately large; thyloses present. Paratracheal parenchyma. Uni to five seriate rays, slightly heterocellular and less than 1 mm high; ray-vessel pits large often stretched. Libriform or with radial pits fibres. Oil cells or mucilage (idioblasts) present. The diagnosis of the species Laurinoxylon diluviale (Unger) Felix, 1883. is also emended. Heteroxylous fossil wood with distinct growth rings; late wood poorly developed with vessels of diameter distinctly smaller as compared to the early wood and with smaller diameter fibres. Diffuse to semiporous vessels, solitary or in radial groups of two to seven , nine to 16 pores/mm²; tangential diameter 100 to 154 μm in early wood and 44 to 72 μm in late wood; vessel length 300 to 550 μm; perforation plates simple and scalariforme (6–12 bars); intervascular pits alternate, rounded (diameter 7–10 μm) or elliptic (long axes × short axes: 10–15 μm × 7–10 μm); thylosis present. Paratracheal parenchyma in more or less complete rows (1–2 cells wide) around the vessels. Heterocellular rays (1–(3) rows of upright cells), of one to five, more frequently three to four cells wide (80%); two to 36 cells high (60 to 820 μm); six to seven rays per tangential millimetre; vessels-rays pits sometimes large, stretched horizontally to vertically. Fibres of 15 to 25 μm in diameter; cell walls of 2–3 μm thick; pits not seen. Oil cells (idioblasts) at the ray margins; 27–60 μm in tangential diameter; 50–80 μm in radial diameter; 72–140 μm high; density of zero to 18 per transversal square millimetres depending on the observed area.