HLA and autoimmunity in North Indian type I (insulin-dependent) diabetic multiplex families

The HLA haplotype segregation and autoantibody spectrum in 7 type I (insulin-dependent) diabetic multiplex families of North Indian origin were determined. Of the total of 17 diabetic sibs, 7 shared both haplotypes and 3 shared one haplotype with the proband. No HLA-non-identical sibs were observed. This distribution of haplotypes was non-random (P approximately equal to 0.005). The mode of inheritance was compatible with an autosomal recessive model, while a dominant model was unlikely. Pancreatic islet-cell antibodies were found in 23.5% of affected sibs, but in no healthy family member. A high incidence of other autoantibodies (parietal-cell and thyroglobulin/thyroid microsomal antibodies) was detected in both the diabetic patients (26.3%), and in healthy first-degree relatives (22.2%). These findings emphasize the role of HLA-linked genes and autoimmunity in the pathogenesis of type I diabetes in North India.     

Extremely high frequencies of alpha-globin gene deletion in Madang and on Kar Kar Island, Papua New Guinea.

Extremely high frequencies of the deletion form of alpha(+)-thalassemia (-alpha/), as studied by the DNA mapping technique, were found in the population of Madang, a coastal province in the north of Papua New Guinea (PNG) and in the population of Kar Kar, an island situated near Madang. Ninety-seven percent of the population tested from Madang and 89% of that from Kar Kar Island were either alpha(+)-thalassemia heterozygotes or homozygotes. By contrast, no examples of the deletion form were detected in the Eastern Highlands of PNG. The haplotype frequencies of alpha(+)-thalassemia (-alpha/) in Madang and Kar Kar Island were found to be 81.33% and 66.67%, respectively. A more detailed analysis of the gene deletion revealed that in both populations 96% were of the 4.2 kilobase (kb) type and 4% were of the 3.7-kb type. Thus, this group is the only example in which the 4.2-kb deletion is predominant over 3.7-kb defect. The presence in high frequencies of alpha(+)-thalassemia in the coastal area of Madang and on the neighboring island, where malaria has long been holoendemic or hyperendemic, and its virtual absence from the nonmalarious highlands of PNG suggest the role of malaria as the selective factor in maintaining alpha(+)-thalassemia. If this selective pressure is still operating, and since alpha(+)-thalassemia has no apparent homozygous disadvantage, the abnormal haplotype (-alpha/) will be in the process of fixation in this population.     

Purification, crystallization, and X-ray diffraction studies of lactotransferrin from buffalo colostrum.

Lactotransferrin is an iron-binding protein. It has been purified from buffalo colostrum. The purified lactotransferrin has been crystallized in 10% ethanol solution. The crystals are orthorhombic and the space group is P2(1)2(1)2(1) with unit cell dimensions a = 161.70 A, b = 155.75 A, c = 113.48 A. The asymmetric unit contains three molecules of the protein with a solvent content of about 59%. The crystals were stable in the X-ray beam and diffract beyond 3.5 A resolution. The native data have been collected and the structure determination is in progress.     

Design of Peptides Using α,β-Dehydro-residues: Synthesis,Crystal Structure and Molecular Conformation of N-Boc-L-Val-ΔPhe–ΔPhe-L-Ala-OCH3

To obtain general rules of peptide design using α,β-dehydro-residues, a sequence with two consecutive ΔPhe-residues, Boc-L -Val-ΔPhe–ΔPhe- L -Ala-OCH₃, was synthesized by azlactone method in solution phase. The peptide was crystallized from its solution in an acetone/water mixture (70:30) in space group P6₁ with a=b=14.912(3) Å, c= 25.548(5) Å, V=4912.0(6) ų. The structure was determined by direct methods and refined by a full matrix least-squares procedure to an R value of 0.079 for 2891 observed [I?3σ(I)] reflections. The backbone torsion angles ?₁=?54(1)°, ψ₁= 129(1)°, ω₁=?177(1)°, ?₂ =57(1)°, ψ₂=15(1)°, ω₂ =?170(1)°, ?₃=80(1)°, ψ₃ =7(2)°, ω₃=?177(1)°, ?₄ =?108(1)° and ψ^T₄=?34 (1)° suggest that the peptide adopts a folded conformation with two overlapping β-turns of types II and III′. These turns are stabilized by two intramolecular hydrogen bonds between the CO of the Boc group and the NH of ΔPhe³ and the CO of Val¹ and the NH of Ala⁴. The torsion angles of ΔPhe² and ΔPhe³ side chains are similar and indicate that the two ΔPhe residues are essentially planar. The folded molecules form head-to- tail intermolecular hydrogen bonds giving rise to continuous helical columns which run parallel to the c-axis. This structure established the formation of two β-turns of types II and III′ respectively for sequences containing two consecutive ΔPhe residues at (i+2) and (i+3) positions with a branched β-carbon residue at one end of the tetrapeptide.     

The application of gene diversity analyses to surname diversity data

The use in the literature of statistics and measures derived for the measurement and the analysis of inbreeding from data on gene frequency diversity and applied to data on surname diversity is discussed. To overcome the difficulties encountered with this approach, a simple mathematical model for analysing isonymy data is proposed. Finally some further measures of surname diversity are given based on measures developed for gene diversity analysis and for community diversity analysis in ecology.     

Immobilization of Brevibacterium flavum cells on collagen for the production of glutamic acid in a recycle reactor

In this study, live cells of Brevibacterium flavum were immobilized for the production of glutamic acid. The reason for such a choice was that glutamic acid fermentation is an extensively studied fermentation and one which requires the viability of entire cellular faculties for the acid production. Brevibacterium flavum was chosen because it is an industrially used bacterium, and is very potent via a vis glutamic acid production. Studies were performed to find aeration and agitation conditions for optimal growth and glutamic acid productivity. Experiments were also done to find the optimum harvesting time. The cell activity peaks during the run of fermentation, and the time at which the peak occurs, was found. Conventional methods for immobilizing the cells on collagen were found to be lacking. The pH and drying were the two main reasons for loss of viability of the cells; the latter being more important. A modified immobilization procedure has been devised, which can immobilize live cells at any given pH and ionic strength, in contrast to the conventional method which requires the pH to be above 11 or below 3. This new method involves dialysis of collagen in suitable dialysis bags against water at pH7 (or buffer at any desired pH). The dialysed collagen blended at 20,000 rpm, resulted in a very smooth dispersion, unnoticeably different from collagen dispersion prepared at pH 11. The dispersed collagen was then cast and dried at an elevated temperature, and high air flow rate over the cast membrane, decreasing the time of drying from 6–8 hr ( in the conventional method) to 1.5–2 hr. The membrane has been tested for glutamic acid producing capabilities in a column reactor with the membrane spirally wound. The reactor has been operated under continuous conditions for 5–10 days with stable activities.     

Production of high-fructose syrup by a heat-fixed Lactobacillus sp.

A Lactobacillus sp. isolated from soil and capable of growing on xylose-containing medium exhibited high glucose isomerase activity. The enzyme was thermostable, stable toward dialysis, and activated by heat treatment. It did not show the presence of xylose or ribose isomerase activities; the K_m for glucose and xylose substrates were 0.48M and 0.513M, respectively. The heat treatment of ultrasonic crude extract gave insoluble fixed active glucose isomerase enzyme. The properties of free and immobilized enzyme in heat-fixed whole cells differed in many respects. The optimum temperature for enzyme activity changed from 70 to 85°C, the optimum substrate concentration changed from 1.0M to 2.4M, and the optimum pH from 7.4 to 6.0. Co²⁺ and Mg²⁺ ions activated the enzyme when used singly, but in combination they inhibited the enzyme and Mn²⁺ had no effect on the enzyme. Free and immobilized enzymes, when used in the used in the conversions of corn and bagasse hydrolysates to fructose, gave 58, 25.6%, and 50, 27.6% conversions, respectively. Immobilized enzyme retained a significant activity for more than 30 hr and was able to operate at higher glucose concentrations showing less products inhibition effect as compared to free enzyme. In the batch process it was able to operate for about eight cycles.     

Bioenergetic considerations in the improvement of oil content and quality in oil-seed crops

Summary Production values (PVs), defined as the weight of the end product/weight of the substrate required for carbon skeletons and energy production, were calculated for plant fatty acids. The PVs varied from 0.361 to 0.300 with linolenic acid having the lowest value. In general, the PVs of unsaturated fatty acids were lower than those of saturated fatty acids of similar chain lengths. Using this basic information, PVs of (A) oils from different oilseed crops, based on their standard fatty acid composition and (B) seed biomass with specified oil content and fatty acid composition were calculated. 1/PV gives the glucose required for the biosynthesis of 1 g end product and thus an estimate of the photosynthate requirement for the desired breeding goal can be estimated. Such calculations show that increasing oil percentage in seeds has a maximum energy cost when the increase in oil is associated with a decrease in the amount of carbohydrates where there is no change in protein concentration. Reduction of erucic acid content in the rapeseed oil did not alter its PV. It is inferred that there are no serious bioenergetic constraints in altering the fatty acid composition.