Vertical distribution of zooplankton in the frontal zone of the Gulf Stream and Labrador Current

Zooplankton data collected during September 1995 in the NorthWest Atlantic at 4139'N, 4958'W (the location of the siteof the ‘Titanic’ wreck) were analysed. The regioninvestigated was characterized by a very sharp frontal zonebetween the Gulf Stream and the main stream of the LabradorCurrent. The total plankton biomass in the water column wasvery high. The macroplankton biomass values below the 600 mlayer were significantly higher as compared with the similarvalues measured before in other productive boreal regions ofthe Atlantic and Pacific oceans. A lot of dead mesoplanktonanimals occurred in the deep layers. The reason was that thecold-water mesoplankton advected by the Labrador Current diedoff intensively within the deep layers of the frontal zone andwere used as a food resource by the macroplankton carnivoresand scavengers that were very abundant there.     

A finite element based method to determine the properties of planar soft tissue.

A finite element based method to determine the incremental elastic material properties of planar membranes was developed and evaluated. The method is applicable to tissues that exhibit inhomogeneity, geometric and material nonlinearity, and anisotropy. Markers are placed on the tissue to form a four-node quadrilateral element. The specimen is loaded to an initial reference state, then three incremental loading sets are applied and the nodal displacements recorded. One of these loadings must include shear. These data are used to solve an over-determined system of equations for the tangent stiffness matrix. The method was first verified using analytical data. Next, data obtained from a latex rubber sheet were used to evaluate experimental procedures. Finally, experiments conducted on preconditioned rat skin revealed nonlinear orthotropic behavior. The vector norm comparing the applied and calculated nodal force vectors was used to evaluate the accuracy of the solutions.     

An implantable transducer for measuring tension in an anterior cruciate ligament graft.

The goal of this study was to develop a new implantable transducer for measuring anterior cruciate ligament (ACL) graft tension postoperatively in patients who have undergone ACL reconstructive surgery. A unique approach was taken of integrating the transducer into a femoral fixation device. To devise a practical in vivo calibration protocol for the fixation device transducer (FDT), several hypotheses were investigated: (1) The use of a cable versus the actual graft as the means for applying load to the FDT during calibration has no significant effect on the accuracy of the FDT tension measurements; (2) the number of flexion angles at which the device is calibrated has no significant effect on the accuracy of the FDT measurements; (3) the friction between the graft and femoral tunnel has no significant effect on measurement accuracy. To provide data for testing these hypotheses, the FDT was first calibrated with both a cable and a graft over the full range of flexion. Then graft tension was measured simultaneously with both the FDT on the femoral side and load cells, which were connected to the graft on the tibial side, as five cadaver knees were loaded externally. Measurements were made with both standard and overdrilled tunnels. The error in the FDT tension measurements was the difference between the graft tension measured by the FDT and the load cells. Results of the statistical analyses showed that neither the means of applying the calibration load, the number of flexion angles used for calibration, nor the tunnel size had a significant effect on the accuracy of the FDT. Thus a cable may be used instead of the graft to transmit loads to the FDT during calibration, thus simplifying the procedure. Accurate calibration requires data from just three flexion angles of 0, 45, and 90 deg and a curve fit to obtain a calibration curve over a continuous range of flexion within the limits of this angle group. Since friction did not adversely affect the measurement accuracy of the FDT, the femoral tunnel can be drilled to match the diameter of the graft and does not need to be overdrilled. Following these procedures, the error in measuring graft tension with the FDT averages less than 10 percent relative to a full-scale load of 257 N.     

SSU1 encodes a plasma membrane protein with a central role in a network of proteins conferring sulfite tolerance in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae SSU1 gene was isolated based on its ability to complement a mutation causing sensitivity to sulfite, a methionine intermediate. SSU1 encodes a deduced protein of 458 amino acids containing 9 or 10 membrane-spanning domains but has no significant similarity to other proteins in public databases. An Ssu1p-GEP fusion protein was localized to the plasma membrane. Multicopy suppression analysis, undertaken to explore relationships among genes previously implicated in sulfite metabolism, suggests a regulatory pathway in which SSU1 acts downstream of FZF1 and SSU3, which in turn act downstream of GRR1.