Assessment of a large number of empirical plant species niche models by elicitation of knowledge from two national experts

Quantitative models play an increasing role in exploring the impact of global change on biodiversity. To win credibility and trust, they need validating. We show how expert knowledge can be used to assess a large number of empirical species niche models constructed for the British vascular plant and bryophyte flora. Key outcomes were (a) scored assessments of each modeled species and niche axis combination, (b) guidance on models needing further development, (c) exploration of the trade‐off between presenting more complex model summaries, which could lead to more thorough validation, versus the longer time these take to evaluate, (d) quantification of the internal consistency of expert opinion based on comparison of assessment scores made on a random subset of models evaluated by both experts. Overall, the experts assessed 39% of species and niche axis combinations to be “poor” and 61% to show a degree of reliability split between “moderate” (30%), “good” (25%), and “excellent” (6%). The two experts agreed in only 43% of cases, reaching greater consensus about poorer models and disagreeing most about models rated as better by either expert. This low agreement rate suggests that a greater number of experts is required to produce reliable assessments and to more fully understand the reasons underlying lack of consensus. While area under curve (AUC) statistics showed generally very good ability of the models to predict random hold‐out samples of the data, there was no correspondence between these and the scores given by the experts and no apparent correlation between AUC and species prevalence. Crowd‐sourcing further assessments by allowing web‐based access to model fits is an obvious next step. To this end, we developed an online application for inspecting and evaluating the fit of each niche surface to its training data.     

A biogeographical analysis of Muhlenbergia (Poaceae: Chloridoideae: Cynodonteae: Muhlenbergiinae)

A phylogeny based on the analysis of six DNA sequence markers (ITS, ndhA intron, rpl32-trnL, rps3, rps16 intron, and rps16-trnK) is used to infer ancestral areas and divergence times, and reconstruct the biogeographical history and evolution of 150 of the 183 (82%) species of Muhlenbergia. Our results suggest that the genus originated 9.3 mya in the Sierra Madre (Occidental and Oriental) in Mexico, splitting into six lineages: M. ramulosa diverging 8.2 mya, M. subg. Muhlenbergia at 5.9 mya, M. subg. Pseudosporobolus at 5.9 mya, M. subg. Clomena at 5.4 mya, M. subg. Bealia at 4.3 mya, and M. subg. Trichochloa at 1 mya, each of these with a high probability of Sierra Madrean origin. Our results further suggest that founder-event speciation from Sierra Madre to South America occurred independently multiple times in all five subgenera during the Pleistocene and late Pliocene. One long-distance dispersal event most likely originating from Central or Eastern North America to East and Central Asia occurred 1.6–1 mya in M. subg. Muhlenbergia. In our cladogram, members of M. subg. Trichochloa show little genetic resolution, suggesting very low levels of divergence among the species, and this may be a consequence of rapid radiation.     

When microbial biotechnology meets material engineering

Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non-native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next-generation-advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self-repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom-up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs.     

Host genetic requirements for DNA release of lactococcal phage TP901-1

The first step in phage infection is the recognition of, and adsorption to, a receptor located on the host cell surface. This reversible host adsorption step is commonly followed by an irreversible event, which involves phage DNA delivery or release into the bacterial cytoplasm. The molecular components that trigger this latter event are unknown for most phages of Gram-positive bacteria. In the current study, we present a comparative genome analysis of three mutants of Lactococcus cremoris 3107, which are resistant to the P335 group phage TP901-1 due to mutations that affect TP901-1 DNA release. Through genetic complementation and phage infection assays, a predicted lactococcal three-component glycosylation system (TGS) was shown to be required for TP901-1 infection. Major cell wall saccharidic components were analysed, but no differences were found. However, heterologous gene expression experiments indicate that this TGS is involved in the glucosylation of a cell envelope-associated component that triggers TP901-1 DNA release. To date, a saccharide modification has not been implicated in the DNA delivery process of a Gram-positive infecting phage.     

Oxidative stress in primary culture hepatocytes isolated from partially hepatectomized rats

The aim of this study was to evaluate the influence of partial hepatectomy prior to cell isolation on hepatocytes in vitro. We characterized the possible changes of various stress oxidative parameters within the first 24 h after seeding. Male Wistar rats served as donors. Hepatocytes were isolated by collagenase digestion from either liver of simulated surgery (SH) or from liver 1 h after 70% hepatectomy (PH), and the changes in stress parameters were analyzed after 1, 3, 18, and 24 h in culture. At 24 h, only hepatocytes from PH maintained significantly increased reactive oxygen species production, oxidized glutathione percentage, and Cu/Zn superoxide dismutase and catalase activities. Our results show that hepatocytes suffer significant cell injury as a result of the isolation procedure, but primary cultured cells from SH metabolically recover from this stress after 18 h. After this time, primary culture hepatocytes primed by PH maintain their in vivo-like metabolic activities (increase in both oxidative stress and antioxidant status).     

Regioselective synthesis of 6-S-alkyl and 6-S-glycosyl-6-thio-D-mannofuranose derivatives from 5,6-O-cyclic sulfate precursors

C-6 opening of 5,6-cyclic sulfate derivatives of mannofuranose with a thiolate anion followed by acidic hydrolysis of the acyclic sulfate gave 6-S-alkyl derivatives in good yields (70-95%) and short reaction times (10-15min). This methodology was applied to the synthesis of methyl 2,3-O-isopropylidene-6-S-(2,3,4,6-tetra-O-acetyl-beta-d-glucopyranosyl)-6-thio-alpha-d-mannofuranoside (70%), 2,3-O-isopropylidene-6-S-(2,3,4,6-tetra-O-acetyl-beta-d-glucopyranosyl)-6-thio-alpha-d-mannofuranose (87%) and 2,3-O-isopropylidene-6-S-(1,2:3,4-di-O-isopropylidene-alpha-d-galactopyranos-6-yl)-6-thio-alpha-d-mannofuranose (87%).     

Sex chromosomes of basal placental mammals

Placental (eutherian) mammals are currently classified into four superordinal clades (Afrotheria, Xenarthra, Laurasiatheria and Supraprimates) of which one, the Afrotheria (a unique lineage of African origin), is generally considered to be basal. Therefore, Afrotheria provide a pivotal evolutionary link for studying fundamental differences between the sex chromosomes of human/mouse (both representatives of Supraprimates and the index species for studies of sex chromosomes) and those of the distantly related marsupials. In this study, we use female fibroblasts to investigate classical features of X chromosome inactivation including replication timing of the X chromosomes and Barr body formation. We also examine LINE-1 accumulation on the X chromosomes of representative afrotherians and look for evidence of a pseudoautosomal region (PAR). Our results demonstrate that asynchronous replication of the X chromosomes is common to Afrotheria, as with other mammals, and Barr body formation is observed across all Placentalia, suggesting that mechanisms controlling this evolved before their radiation. Finally, we provide evidence of a PAR (which marsupials lack) and demonstrate that LINE1 is accumulated on the afrotherian and xenarthran X, although this is probably not due to transposition events in a common ancestor, but rather ongoing selection to retain recently inserted LINE1 on the X.     

Comparative polytene chromosome maps of <Emphasis Type="Italic">D. montana</Emphasis> and <Emphasis Type="Italic">D. virilis</Emphasis>

Chromosomal inversion polymorphism was characterized in Finnish Drosophila montana populations. A total of 14 polymorphic inversions were observed in Finnish D. montana of which nine had not been described before. The number of polymorphic inversions in each chromosome was not significantly different from that expected, assuming equal chance of occurrence in the euchromatic genome. There was, however, no correlation between the number of polymorphic inversions and that of fixed inversions in each chromosome. Therefore, a simple neutral model does not explain the evolutionary dynamics of inversions. Furthermore, in contrast to results obtained by others, no significant correlation was found between the two transposable elements (TEs) Penelope and Ulysses and inversion breakpoints in D. montana. This result suggests that these TEs were not involved in the creation of the polymorphic inversions seen in D. montana. A comparative analysis of D. montana and Drosophila virilis polytene chromosomes 4 and 5 was performed with D. virilis bacteriophage P1 clones, thus completing the comparative studies of the two species.     

Structural differences in centromeric heterochromatin are spatially reconciled on fertilisation in the mouse zygote

In mammals, paternal and maternal pronuclei undergo profound chromatin reorganisation upon fertilisation. How these events are orchestrated within centromeric regions to ensure proper chromosome segregation in the following cellular divisions is unknown. In this study, we followed the dynamic unfolding of the centromeric regions, i.e. the centric and pericentric satellite repeats, by DNA fluorescent in situ hybridization (FISH) during the first cell cycle up to the two-cell stage. The distinct chromatin from female and male gametes both undergo rapid remodelling and reach a zygotic organisation in which the satellites occupy restricted spatial domains surrounding the nucleolar precursor body. A transition from this zygotic to a somatic cell-like organisation takes place during the two-cell stage. Using 3D immuno-FISH, we find that, whereas maternal pericentric regions are marked with H3K9me3, H4K20me3 and HP1β, paternal ones only showed HP1β marking. Thus, despite different chromatin features, male and female pronuclei organise their centromeric regions in the same way within the nuclei to align chromosomes on the metaphase plate and segregate them appropriately. Our findings highlight the importance of ensuring a proper centromere function while preserving the distinction of parental genome origin during the return to totipotency in the zygote. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.