A Two-Day Continuous Nicotine Infusion Is Sufficient to Demonstrate Nicotine Withdrawal in Rats as Measured Using Intracranial Self-Stimulation

Avoidance of the negative affective (emotional) symptoms of nicotine withdrawal (e.g., anhedonia, anxiety) contributes to tobacco addiction. Establishing the minimal nicotine exposure conditions required to demonstrate negative affective withdrawal signs in animals, as well as understanding moderators of these conditions, could inform tobacco addiction-related research, treatment, and policy. The goal of this study was to determine the minimal duration of continuous nicotine infusion required to demonstrate nicotine withdrawal in rats as measured by elevations in intracranial self-stimulation (ICSS) thresholds (anhedonia-like behavior). Administration of the nicotinic acetylcholine receptor antagonist mecamylamine (3.0 mg/kg, s.c.) on alternate test days throughout the course of a 2-week continuous nicotine infusion (3.2 mg/kg/day via osmotic minipump) elicited elevations in ICSS thresholds beginning on the second day of infusion. Magnitude of antagonist-precipitated withdrawal did not change with further nicotine exposure and mecamylamine injections, and was similar to that observed in a positive control group receiving mecamylamine following a 14-day nicotine infusion. Expression of a significant withdrawal effect was delayed in nicotine-infused rats receiving mecamylamine on all test days rather than on alternate test days. In a separate study, rats exhibited a transient increase in ICSS thresholds following cessation of a 2-day continuous nicotine infusion (3.2 mg/kg/day). Magnitude of this spontaneous withdrawal effect was similar to that observed in rats receiving a 9-day nicotine infusion. Our findings demonstrate that rats exhibit antagonist-precipitated and spontaneous nicotine withdrawal following a 2-day continuous nicotine infusion, at least under the experimental conditions studied here. Magnitude of these effects were similar to those observed in traditional models involving more prolonged nicotine exposure. Further development of these models, including evaluation of more clinically relevant nicotine dosing regimens and other measures of nicotine withdrawal (e.g., anxiety-like behavior, somatic signs), may be useful for understanding the development of the nicotine withdrawal syndrome.     

Ephrin-mediated restriction of ERK1/2 activity delimits the number of pigment cells in the Ciona CNS

Recent evidence suggests that ascidian pigment cells are related to neural crest-derived melanocytes of vertebrates. Using live-imaging, we determine a revised cell lineage of the pigment cells in Ciona intestinalis embryos. The neural precursors undergo successive rounds of anterior–posterior (A–P) oriented cell divisions, starting at the blastula 64-cell stage. A previously unrecognized fourth A–P oriented cell division in the pigment cell lineage leads to the generation of the post-mitotic pigment cell precursors. We provide evidence that MEK/ERK signals are required for pigment cell specification until approximately 30 min after the final cell division has taken place. Following each of the four A–P oriented cell divisions, ERK1/2 is differentially activated in the posterior sister cells, into which the pigment cell lineage segregates. Eph/ephrin signals are critical during the third A–P oriented cell division to spatially restrict ERK1/2 activation to the posterior daughter cell. Targeted inhibition of Eph/ephrin signals results in, at neurula stages, anterior expansion of both ERK1/2 activation and a pigment cell lineage marker and subsequently, at larval stages, supernumerary pigment cells. We discuss the implications of these findings with respect to the evolution of the vertebrate neural crest.     

The Restoration of Phytophagous Beetles in Species‐Rich Chalk Grasslands

This study focuses on the restoration of chalk grasslands over a 6‐year period and tests the efficacy of two management practices, hay spreading and soil disturbance, in promoting this process for phytophagous beetles. Restoration success for the beetles, measured as similarity to target species–rich chalk grassland, was not found to be influenced by either management practice. In contrast, restoration success for the plants did increase in response to hay spreading management. Although the presence of suitable host plants was considered to dictate the earliest point at which phytophagous beetles could successfully colonized, few beetle species colonized as soon as their host plants became established. Morphological characteristics and feeding habits of 27 phytophagous beetle species were therefore tested to identify factors that limited their colonization and persistence. The lag time between host plant establishment and colonization was greatest for flightless beetles. Beetles with foliage‐feeding larvae both colonized at slower rates than seed‐, stem‐, or root‐feeding species and persisted within the swards for shorter periods. Although the use of hay spreading may benefit plant communities during chalk grassland restoration, it did not directly benefit phytophagous beetles. Without techniques for overcoming colonization limitation for invertebrate taxa, short‐term success of restoration may be limited to the plants only.     

Diversity and temporal stability of bacterial communities in a model passerine bird, the zebra finch

The composition and dynamics of the gastrointestinal bacterial communities in birds is determined by both host-specific and environmental exposure factors yet these are poorly understood. We selected the zebra finch, Taeniopygia guttata, as the host species to examine the diversity and temporal stability of the faecal microflora in a bird, owing to its importance as a model organism in avian ecology, neuroscience and evolution studies. The stability of the gut bacterial community of individual male and female zebra finches was assessed through repeat faecal sampling via culture and temperature gradient gel electrophoresis and partial sequencing of PCR-amplified eubacterial 16S rRNA gene products. Nineteen bacterial genera were detected across all samples (n = 99), with each bird carrying on average six operational taxonomic units. Using a novel statistical approach, we showed that bacterial assemblages and community richness varied between individual birds but remained stable over time within individuals. Neither the composition nor richness of bacterial communities differed significantly between the sexes. Our results show that zebra finches housed together under controlled conditions show consistent variation between individuals in their gut microflora that is not attributable to differences in host exposure to environmental microbial sources. Future studies could usefully explore the origin of this individual-specific variation and its consequences for host fitness and sexual selection.     

Thymus-associated parathyroid hormone has two cellular origins with distinct endocrine and immunological functions

In mammals, parathyroid hormone (PTH) is a key regulator of extracellular calcium and inorganic phosphorus homeostasis. Although the parathyroid glands were thought to be the only source of PTH, extra-parathyroid PTH production in the thymus, which shares a common origin with parathyroids during organogenesis, has been proposed to provide an auxiliary source of PTH, resulting in a higher than expected survival rate for aparathyroid Gcm2 ^−/− mutants. However, the developmental ontogeny and cellular identity of these “thymic” PTH–expressing cells is unknown. We found that the lethality of aparathyroid Gcm2 ^−/− mutants was affected by genetic background without relation to serum PTH levels, suggesting a need to reconsider the physiological function of thymic PTH. We identified two sources of extra-parathyroid PTH in wild-type mice. Incomplete separation of the parathyroid and thymus organs during organogenesis resulted in misplaced, isolated parathyroid cells that were often attached to the thymus; this was the major source of thymic PTH in normal mice. Analysis of thymus and parathyroid organogenesis in human embryos showed a broadly similar result, indicating that these results may provide insight into human parathyroid development. In addition, medullary thymic epithelial cells (mTECs) express PTH in a Gcm2-independent manner that requires TEC differentiation and is consistent with expression as a self-antigen for negative selection. Genetic or surgical removal of the thymus indicated that thymus-derived PTH in Gcm2 ^−/− mutants did not provide auxiliary endocrine function. Our data show conclusively that the thymus does not serve as an auxiliary source of either serum PTH or parathyroid function. We further show that the normal process of parathyroid organogenesis in both mice and humans leads to the generation of multiple small parathyroid clusters in addition to the main parathyroid glands, that are the likely source of physiologically relevant “thymic PTH.”     

Development and Application of a New Method for Specific and Sensitive Enumeration of Spores of Nonproteolytic Clostridium botulinum Types B,E, and F in Foods and Food Materials

The highly potent botulinum neurotoxins are responsible for botulism, a severe neuroparalytic disease. Strains of nonproteolytic Clostridium botulinum form neurotoxins of types B, E, and F and are the main hazard associated with minimally heated refrigerated foods. Recent developments in quantitative microbiological risk assessment (QMRA) and food safety objectives (FSO) have made food safety more quantitative and include, as inputs, probability distributions for the contamination of food materials and foods. A new method that combines a selective enrichment culture with multiplex PCR has been developed and validated to enumerate specifically the spores of nonproteolytic C. botulinum. Key features of this new method include the following: (i) it is specific for nonproteolytic C. botulinum (and does not detect proteolytic C. botulinum), (ii) the detection limit has been determined for each food tested (using carefully structured control samples), and (iii) a low detection limit has been achieved by the use of selective enrichment and large test samples. The method has been used to enumerate spores of nonproteolytic C. botulinum in 637 samples of 19 food materials included in pasta-based minimally heated refrigerated foods and in 7 complete foods. A total of 32 samples (5 egg pastas and 27 scallops) contained spores of nonproteolytic C. botulinum type B or F. The majority of samples contained <100 spores/kg, but one sample of scallops contained 444 spores/kg. Nonproteolytic C. botulinum type E was not detected. Importantly, for QMRA and FSO, the construction of probability distributions will enable the frequency of packs containing particular levels of contamination to be determined.Food-borne botulism is a severe and deadly intoxication caused by the consumption of food containing as little as 30 to 100 ng of preformed botulinum neurotoxin (45). More than 2,500 cases of botulism were reported in Europe in 1999 and 2000, with the majority of cases in the east of the continent (44). Currently, 25 to 50 food-borne botulism cases are diagnosed annually in the United States (27). There are seven distinct botulinum neurotoxins (types A to G) and a number of subtypes (6, 26, 45). In view of the potency of the botulinum neurotoxin and the severity of botulism, four phylogenetically distinct bacteria are grouped together as the Clostridium botulinum species, solely on the basis of their ability to form botulinum neurotoxin. The divergence between these four distinct bacteria is strong enough to merit their classification as distinct species and in some cases is significantly greater than that between bacteria belonging to different genera, e.g., Bacillus subtilis and Staphylococcus aureus (7). Two of these bacteria (proteolytic C. botulinum and nonproteolytic C. botulinum) are responsible for the majority of cases of food-borne botulism. Strains of proteolytic C. botulinum produce neurotoxins of type A, B, or F, form spores of high heat resistance, and have a minimum growth temperature of approximately 12°C (39). Strains of nonproteolytic C. botulinum produce neurotoxins of type B, E, or F, form spores of moderate heat resistance, and are able to grow and form toxin at 3°C (18, 48) and are recognized as the major hazard associated with minimally heated refrigerated foods (4, 37, 43, 44, 48). These new foods meet consumer demand for high-quality, convenient foods that are low in preservatives, and sales are presently increasing by about 10% per annum in many countries (3, 47).Quantitative microbiological risk assessment (QMRA) is now established as an important microbiology food safety tool (42). Process risk models have been used to assess the safety of specific foods with respect to nonproteolytic C. botulinum and the food-borne botulism hazard (e.g., 2, 41). These process risk models benefit from high-quality information, including that on the incidence of spores of nonproteolytic C. botulinum spores in food materials. The implementation of food safety objectives (FSO) also benefits from the availability of high-quality information on the microbial contamination of foods and food materials (24). This information is most effective in the form of probability distributions rather than as average spore concentrations or other statistics.The difficulty with enumerating nonproteolytic C. botulinum in foods is that there is no effective selective culture medium available. Surveys of the extent of contamination of foods and food materials have used a nonselective enrichment followed by either testing for neurotoxin using a mouse test or enzyme-linked immunosorbent assay (ELISA) or testing for the presence of neurotoxin genes using a PCR test (3, 10, 13, 35, 38, 39). This approach, however, is not optimized for nonproteolytic C. botulinum or proteolytic C. botulinum (therefore potentially failing to recover all spores of either organism) and may also not distinguish nonproteolytic C. botulinum from proteolytic C. botulinum. Heating at 80°C for 10 min followed by incubation at 35°C (54) may be reasonably selective for proteolytic C. botulinum, but there is no similar approach for nonproteolytic C. botulinum, although incubation at 28°C (54) may offer an element of selection. It is necessary, therefore, to develop a method to enumerate spores of nonproteolytic C. botulinum in food materials that is robust and optimized, as well as sensitive and specific for this particular pathogen (and does not also detect proteolytic C. botulinum). When enumerating bacteria in foods, it is essential to demonstrate the efficiency of the method by verifying that small concentrations (in the present study, spores of nonproteolytic C. botulinum) can be detected following addition to test samples.This paper describes the development, validation, and application of a new method to enumerate spores of nonproteolytic C. botulinum in foods and in food materials. This method has been designed to generate data for the construction of probability distributions that can be used in QMRA and FSO settings. Most of the effort has been dedicated to the development and evaluation of the enrichment procedure rather than the PCR test, as the PCR test has received much attention from others (e.g., 3, 10, 16, 36, 38). A low-temperature selective-enrichment procedure is described that has been optimized specifically for nonproteolytic C. botulinum over proteolytic C. botulinum and other bacteria. In order to detect low concentrations of spores, large quantities (200 g) of food materials and foods have been tested. Specific detection of neurotoxin genes is achieved by the use of an established multiplex PCR (36), with an internal amplification control now included (25). By the use of a set of control samples inoculated with defined concentrations of spores of nonproteolytic C. botulinum, the detection limit has been estimated for each food material and food tested. The method has been used in an extensive survey of raw materials intended for use in pasta ready meals, as well as the final meals themselves. The implications for risk assessment and risk management of chilled foods are discussed.     

Use of Purified Clostridium difficile Spores To Facilitate Evaluation of Health Care Disinfection Regimens

Clostridium difficile is a major cause of antibiotic-associated diarrheal disease in many parts of the world. In recent years, distinct genetic variants of C. difficile that cause severe disease and persist within health care settings have emerged. Highly resistant and infectious C. difficile spores are proposed to be the main vectors of environmental persistence and host transmission, so methods to accurately monitor spores and their inactivation are urgently needed. Here we describe simple quantitative methods, based on purified C. difficile spores and a murine transmission model, for evaluating health care disinfection regimens. We demonstrate that disinfectants that contain strong oxidizing active ingredients, such as hydrogen peroxide, are very effective in inactivating pure spores and blocking spore-mediated transmission. Complete inactivation of 10⁶ pure C. difficile spores on indicator strips, a six-log reduction, and a standard measure of stringent disinfection regimens require at least 5 min of exposure to hydrogen peroxide vapor (HPV; 400 ppm). In contrast, a 1-min treatment with HPV was required to disinfect an environment that was heavily contaminated with C. difficile spores (17 to 29 spores/cm²) and block host transmission. Thus, pure C. difficile spores facilitate practical methods for evaluating the efficacy of C. difficile spore disinfection regimens and bringing scientific acumen to C. difficile infection control.Clostridium difficile is a Gram-positive, spore-forming, anaerobic bacterium that is a major cause of health care-acquired infections and antibiotic-associated diarrhea (2). In recent years, several genetic variants of C. difficile have emerged as important health care pathogens (6). Perhaps most notable is the “hypervirulent” variant, commonly referred to as PCR ribotype 027/restriction endonuclease analysis (REA) group BI, that produces elevated levels of toxins TcdA and TcdB (17, 19). Other virulent ribotypes that display extensive heterogeneity among their toxin protein sequences (26) and gene activities (8) have emerged. Using whole-genome sequencing, we demonstrated that there are broad genetic differences between the entire genomes of several common variants, including ribotype/REA group variants 012/R, 017/CF, and 027/BI used in this study (12, 27, 31). In contrast, phylogeographic analysis of 027/BI isolates from Europe and the United States demonstrates that this clade is extremely clonal and implies recent transcontinental spread of hypervirulent C. difficile (12).C. difficile is distinct from many other health care pathogens because it produces highly infectious spores that are shed into the environment (25, 28). C. difficile spores can resist disinfection regimens that normally inactivate other health care pathogens, such as methicillin-resistant Staphylococcus aureus and vancomycin-resistant enterococci, therefore challenging current infection control measures (2). A multifaceted approach is normally used to control C. difficile in health care facilities (32). Interventions include antimicrobial stewardship, increased clinical awareness, patient isolation (11), and enhanced environmental disinfection regimens based on hydrogen peroxide (H₂O₂) vapor (HPV) (4). While attempts to break the spore-mediated infection cycle and interrupt these efficient routes of transmission are important for infection control measures, there is little quantitative evidence indicating which interventions are most effective (7). Here we describe the exploitation of pure C. difficile spores (16) and a murine transmission model (15) in simple, practical methods to quantitatively monitor the impact of health care disinfection regimens on C. difficile viability. These methods can be used to optimize disinfection regimens targeted at C. difficile.     

Computationally efficient finite element evaluation of natural patellofemoral mechanics

Finite element methods have been applied to evaluate in vivo joint behavior, new devices, and surgical techniques but have typically been applied to a small or single subject cohort. Anatomic variability necessitates the use of many subject-specific models or probabilistic methods in order to adequately evaluate a device or procedure for a population. However, a fully deformable finite element model can be computationally expensive, prohibiting large multisubject or probabilistic analyses. The aim of this study was to develop a group of subject-specific models of the patellofemoral joint and evaluate trade-offs in analysis time and accuracy with fully deformable and rigid body articular cartilage representations. Finite element models of eight subjects were used to tune a pressure-overclosure relationship during a simulated deep flexion cycle. Patellofemoral kinematics and contact mechanics were evaluated and compared between a fully deformable and a rigid body analysis. Additional eight subjects were used to determine the validity of the rigid body pressure-overclosure relationship as a subject-independent parameter. There was good agreement in predicted kinematics and contact mechanics between deformable and rigid analyses for both the tuned and test groups. Root mean square differences in kinematics were less than 0.5 deg and 0.2 mm for both groups throughout flexion. Differences in contact area and peak and average contact pressures averaged 5.4%, 9.6%, and 3.8%, respectively, for the tuned group and 6.9%, 13.1%, and 6.4%, respectively, for the test group, with no significant differences between the two groups. There was a 95% reduction in computational time with the rigid body analysis as compared with the deformable analysis. The tuned pressure-overclosure relationship derived from the patellofemoral analysis was also applied to tibiofemoral (TF) articular cartilage in a group of eight subjects. Differences in contact area and peak and average contact pressures averaged 8.3%, 11.2%, and 5.7% between rigid and deformable analyses in the tibiofemoral joint. As statistical, probabilistic, and optimization techniques can require hundreds to thousands of analyses, a viable platform is crucial to component evaluation or clinical applications. The computationally efficient rigid body platform described in this study may be integrated with statistical and probabilistic methods and has potential clinical application in understanding in vivo joint mechanics on a subject-specific or population basis.