Correction to: Novel biphenyl diester derivative AB-38b inhibits NLRP3 inflammasome through Nrf2 activation in diabetic nephropathy

Cell Biology and Toxicology -     

Physicochemical and structural characteristics of chitosan nanopowders prepared by ultrafine milling

Two different molecular weights of chitosan were pulverized to nanopowders by ultrafine milling. The nanopowders were characterized by viscometry small angle X-ray scattering (SAXS), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), FT-IR spectroscopy and UV-vis spectroscopy. Our results showed that ultrafine milling effectively reduced the particle size of chitosan to a nanoscale. The viscosity average molecular weight (Mv) of chitosan was decreased by the milling treatment. The crystalline structure of chitosan was destroyed by the milling since the nanopowder exhibited an amorphous XRD pattern. In addition, thermal stability of the low molecular weight chitosan was decreased after the milling treatment. FT-IR and UV-vis spectra showed that the milling process did not cause significant changes in the chemical structure of chitosan.     

Magnetic anisotropy of the radula of chiton Acanthochiton rubrolinestus LISCHKE

The magnetic anisotropy of the whole radula, the major lateral radula teeth, and magnetic material in the major lateral radula teeth of the chiton Acanthochiton rubrolinestus LISCHKE have been studied by a magnetic torque meter and superconducting quantum interference device (SQUID) magnetometer. The length and width axes of the teeth are the easily magnetized axes, while the thickness axis is difficult to magnetize. The width and thickness axes of the radula are the easily magnetized axes, and the length axis is difficult to magnetize. The measurement results of the whole radula and the major lateral radula teeth agree well with each other. The magnetic anisotropy of the magnetic material is given as well as a possible distribution of the magnetic material in the major lateral radula teeth.     

镉、锌、铜胁迫对向日葵早期幼苗生长的影响

分析了3种重金属离子(Cd2+、Cu2+、Zn2+)对向日葵种子胚根伸长和早期幼苗生长的影响.结果表明,3种重金属离子对向日葵胚根伸长的抑制作用依次为:Cd2+>Cu2+>Zn2+.3种重金属胁迫明显降低了幼苗生长和叶绿素含量,并显著提高了H2O2水平.其中Cd2+胁迫引起幼苗H2O2爆发高于Cu2+和Zn2+胁迫.进一步分析植株抗氧化系统的变化发现,随着重金属离子浓度的增加,向日葵幼苗酶类抗氧化物质SOD和CAT的活性表现为先增加后降低的趋势;重金属胁迫提高了非酶类的抗氧化物质脯氨酸和GSH的含量.其中Cd2+和Zn2+胁迫对脯氨酸含量变化的影响大于Cu2+胁迫;而Cu2+胁迫对GSH含量变化的影响大于Cd2+和Zn2+胁迫.     

几种动物肝脏糖胺聚糖的醋酸纤维素薄膜电泳分析

采用酶解和离子交换色谱的方法,从兔、鸡、猪和羊肝组织中提取和纯化得到了糖胺聚糖（GAGs）.通过比较透明质酸（HA）、硫酸软骨素A（CS-A）、硫酸软骨素C（CS-C）、硫酸皮肤素（DS）、肝素（HP）、硫酸乙酰肝素（HS）等标准品在醋酸钡、醋酸锌、吡啶-甲酸等几种不同缓冲体系下的醋酸纤维素薄膜电泳行为,结合灰度积分建立了适合于微量GAGs定性和定量分析的电泳方法.将从不同动物肝脏组织中提取的GAGs运用该方法进行分析,发现 不同动物肝脏组织中,GAG含量和组成均有较大差异：羊肝中GAGs含量最高（0.52 mg/g 组织干粉）,种类也最丰富,含有HA、HS、DS和CS,其中HA所占比例最高;鸡肝中GAGs含量最少（0.18 mg/g组织干粉）,主要含有HA和DS;兔肝GAGs种类与猪肝相似,均含有HA、HS和DS,但HS是猪肝GAGs的主要成分,DS是兔肝GAGs的主要成分.     

杂交-渐渗进化理论在转基因逃逸及其环境风险评价和研究中的意义

转基因作物的商品化生产和大规模环境释放, 引起了全球对生物安全问题的广泛关注和争议, 其中转基因通过花粉介导的基因漂移逃逸到非转基因作物及其野生近缘种, 进而带来不同类型的环境风险就是备受争议的生物安全问题之一。有效的生物安全评价和研究能够为转基因作物的安全持久利用保驾护航。按照风险评价的原则, 对于转基因逃逸及其潜在环境风险的评价应包括两个重要步骤: (1)检测转基因向野生近缘种(包括杂草类型)群体逃逸的频率; (2)确定逃逸后的转基因能否通过遗传渐渗在野生近缘种群体中存留和扩散。杂交－渐渗是进化生物学中非常重要的科学命题和普遍的自然现象, 杂交－渐渗的进化理论与转基因逃逸及其潜在环境风险的研究和评价有密切的关系。杂交－渐渗过程往往导致物种形成、适应性进化和自然群体的濒危与灭绝, 这是因为在杂交－渐渗过程中, 不同的机制如遗传同化作用、群体湮没效应以及群体的选择性剔除效应等都会在很大程度上影响群体的进化过程。转基因通过杂交－渐渗进入野生群体, 使这一过程更加复杂化。如果转基因能提高群体的适合度, 则更有利于其渐渗速率, 从而在群体中迅速扩散并带来一定的生态后果。杂交－渐渗的进化理论和思想将有益于指导转基因逃逸及其潜在环境风险的研究和评价。     

Combinatorial Control of Recruitment of a Variant PRC1.6 Complex in Embryonic Stem Cells

1. Download high-res image (182KB)
2. Download full-size image

     

Deficiency of Macf1 in osterix expressing cells decreases bone formation by Bmp2/Smad/Runx2 pathway

Microtubule actin cross‐linking factor 1 (Macf1) is a spectraplakin family member known to regulate cytoskeletal dynamics, cell migration, neuronal growth and cell signal transduction. We previously demonstrated that knockdown of Macf1 inhibited the differentiation of MC3T3‐E1 cell line. However, whether Macf1 could regulate bone formation in vivo is unclear. To study the function and mechanism of Macf1 in bone formation and osteogenic differentiation, we established osteoblast‐specific Osterix (Osx) promoter‐driven Macf1 conditional knockout mice (Macf1^f/fOsx‐Cre). The Macf1^f/fOsx‐Cre mice displayed delayed ossification and decreased bone mass. Morphological and mechanical studies showed deteriorated trabecular microarchitecture and impaired biomechanical strength of femur in Macf1^f/fOsx‐Cre mice. In addition, the differentiation of primary osteoblasts isolated from calvaria was inhibited in Macf1^f/fOsx‐Cre mice. Deficiency of Macf1 in primary osteoblasts inhibited the expression of osteogenic marker genes (Col1, Runx2 and Alp) and the number of mineralized nodules. Furthermore, deficiency of Macf1 attenuated Bmp2/Smad/Runx2 signalling in primary osteoblasts of Macf1^f/fOsx‐Cre mice. Together, these results indicated that Macf1 plays a significant role in bone formation and osteoblast differentiation by regulating Bmp2/Smad/Runx2 pathway, suggesting that Macf1 might be a therapeutic target for bone disease.     

Testing DNA barcodes in closely related species of Curcuma (Zingiberaceae) from Myanmar and China

The genus Curcuma L. is commonly used as spices, medicines, dyes and ornamentals. Owing to its economic significance and lack of clear‐cut morphological differences between species, this genus is an ideal case for developing DNA barcodes. In this study, four chloroplast DNA regions (matK, rbcL, trnH‐psbA and trnL‐F) and one nuclear region (ITS2) were generated for 44 Curcuma species and five species from closely related genera, represented by 96 samples. PCR amplification success rate, intra‐ and inter‐specific genetic distance variation and the correct identification percentage were taken into account to assess candidate barcode regions. PCR and sequence success rate were high in matK (89.7%), rbcL (100%), trnH‐psbA (100%), trnL‐F (95.7%) and ITS2 (82.6%) regions. The results further showed that four candidate chloroplast barcoding regions (matK, rbcL, trnH‐psbA and trnL‐F) yield no barcode gaps, indicating that the genus Curcuma represents a challenging group for DNA barcoding. The ITS2 region presented large interspecific variation and provided the highest correct identification rates (46.7%) based on BLASTClust method among the five regions. However, the ITS2 only provided 7.9% based on NJ tree method. An increase in discriminatory power needs the development of more variable markers.     

东乡野生稻BILs群体耐低氮性表型性状指标筛选及其综合评价

为了鉴定东乡野生稻及其后代群体的耐低氮性,研究低氮和正常氮2种处理下“协青早B//东乡野生稻/协青早B”BC₁-F₁₂回交重组自交系株高、抽穗期、穗长、有效穗数、穗实粒数、穗总粒数、着粒密度、结实率、千粒重和单株产量等10个表型性状,利用主成分分析和模糊隶属函数对BILs群体的耐低氮性进行综合评价.结果表明： 株系116、143和157的耐低氮性强,可作为东乡野生稻耐低氮性遗传研究和水稻耐低氮性育种的中间材料.采用逐步回归分析法建立了耐低氮性最优回归方程,筛选到株高、穗总粒数、结实率、千粒重和单株产量等5个性状相对值可作为水稻全生育期耐低氮性的综合评价指标.因此,在水稻耐低氮性遗传改良中,应注重对这5个性状,尤其是穗总粒数和单株产量相对值的选择.