Clinical nerve reconstruction with a bioabsorbable polyglycolic acid tube

Microneurosurgical techniques to reconstruct nerve gaps with nerve grafts frequently fail to achieve excellent functional results and create donor-site morbidity. In the present study, 15 patients had gaps of 0.5 to 3.0 cm (mean 1.7 cm) in digital nerves reconstructed by one surgeon with a bioabsorbable polyglycolic acid (PGA) tube. A final evaluation of sensibility was done by a second surgeon at a mean postoperative interval of 22.4 months (range 11 to 32 months). These were all secondary reconstructions. The evaluation included a digital nerve block with local anesthetic for the intact (not reconstructed) digital nerve. Excellent functional sensation (moving two-point discrimination less than or equal to 3 mm and/or static two-point discrimination less than or equal to 6 mm) was present in 33 percent and good functional sensation (moving two-point discrimination of 4 to 7 mm and/or static two-point discrimination of 7 to 15 mm) in 53 percent of the digital nerve reconstructions. One patient with poor sensory recovery and one with no recovery were judged as functional failures (14 percent). Absence of pain at the site of reconstruction was judged by the patient to be excellent in 40 percent, good in 33 percent, and poor in 27 percent. We conclude that reconstruction of nerve gaps of up to 3.0 cm with a bioabsorbable PGA tube gives clinical results at least comparable to the classic nerve graft technique while avoiding donor-site morbidity.     

Kinetics of C-photosynthate translocation in morning glory vines

The movement of ¹⁴C-photosynthate in morning glory (Ipomea nil Roth, cu. Scarlet O'Hara) vines 2 to 5 meters long was followed by labeling a lone mature leaf with ¹⁴CO₂ and monitoring the arrival rate of tracer at expanding sink leaves on branches along the stem. To a first approximation, the kinetic behavior of the translocation profiles resembled that which would be expected from movement at a single velocity (“plug flow”) without tracer loss from the translocation stream. There was no consistent indication of a velocity gradient along the vine length. The profile moved along the vine as a distinct asymmetrical peak which changes shape only slowly. The spatial distribution of tracer along the vine reasonably matched that predicted on the basis of the arrival kinetics at a sink, assuming plug flow with no tracer loss. These observations are in marked contrast to the kinetic behavior of any mechanism describable by diffusion equations.

However, a progressive change in profile shape (a symmetrical widening) was observed, indicating a range of translocation velocities. A minimum of at least two factors must have contributed to the observed velocity gradient: the exchange of ¹⁴C between sieve elements and companion cells (demonstrated by microautoradiography) and the range of velocities in the several hundred sieve tubes which carried the translocation stream. Possible effects of these two factors on profile spreading were investigated by means of numerical models. The models are necessarily incomplete, due principally to uncertainties about the exchange rate between sieve elements and companion cells and the degree of functional connectivity between sieve tubes of different conductivities. However, most of the observed profile spreading may be reasonably attributed to the combined effects of those two factors.

The mass average velocity of translocation (calculated from the mean times of ¹⁴C arrival at successive sink leaves) was about 75% of the maximum velocity (calculated from the times of initial detection at the same sink leaves), which was usually between 0.6 and 1 cm min⁻¹. Owing to tracer exchange between sieve elements and companion cells, the mass average velocity of tracer in the sieve tubes was probably closer to 86% of the maximum velocity, a figure which agreed with a predicted velocity distribution based on calculated sieve tube conductivities and the size distribution of functional sieve tubes.

     

Differential Indicators of Diabetes-Induced Oxidative Stress in New Zealand White Rabbits: Role of Dietary Vitamin E Supplementation

Determination of reliable bioindicators of diabetes-induced oxidative stress and the role of dietary vitamin E supplementation were investigated. Blood (plasma) chemistries, lipid peroxidation (LPO), and antioxidant enzyme activities were measured over 12 weeks in New Zealand White rabbits (control, diabetic, and diabetic + vitamin E). Cholesterol and triglyceride levels did not correlate with diabetic state. PlasmaLPOwas influenced by diabetes and positively correlated with glucose concentration only, not cholesterol or triglycerides. Liver glutathione peroxidase (GPX) activity negatively correlated with glucose and triglyceride levels. Plasma and erythrocyte GPX activities positively correlated with glucose, cholesterol, and triglyceride concentrations. Liver superoxide dismutase activity positively correlated with glucose and cholesterol concentration. Vitamin E reduced plasma LPO, but did not affect the diabetic state. Thus, plasmaLPOwas the most reliable indicator of diabetes-induced oxidative stress. Antioxidant enzyme activities and types of reactive oxygen species generated were tissue dependent. Diabetes-induced oxidative stress is diminished by vitamin E supplementation.     

Peptidase mutants of Salmonella typhimurium

Six peptidase activities have been distinguished electrophoretically in cell extracts of Salmonella typhimurium with the aid of a histochemical stain. The activities can also be partially separated by chromatography on diethylaminoethyl-cellulose. These peptidases show overlapping substrate specificities. Mutants (pepN) of the parent strain leu-485 lacking one of these enzymes (peptidase N) were obtained by screening for colonies that do not hydrolyze the chromogenic substrate l-alanyl-beta-naphthylamide. The absence of this broad-specificity peptidase in leu-485 pepN(-) mutants allowed the selection of mutants unable to use l-leucyl-l-alaninamide as a leucine source. These mutants (leu-485 pepN(-)pepA(-)) lack a broad-specificity peptidase (peptidase A) similar to aminopeptidase I previously described in Escherichia coli. Mutants (pepD) lacking a dipeptidase (peptidase D) have been isolated from a leu-485 pepN(-)pepA(-) parent by penicillin selection for mutants unable to use l-leucyl-l-glycine as a leucine source. Mutants (pepB) lacking a fourth peptidase (peptidase B) have been isolated from a leu-485 pepN(-)pepA(-)pepD(-) strain by penicillin selection for failure to utilize l-leucyl-l-leucine as a source of leucine. Single recombinants were obtained by transduction for each of the peptidases missing in a leu-485 pepN(-)pepA(-)pepD(-)pepB(-) strain. The growth response of these recombinants to leucine peptides shows that all of these peptidases can function in the catabolism of peptides and that they display overlapping substrate specificities in vivo.     

Use of passive radio frequency identification technologies to monitor nest usage in the northern carmine bee‐eater (Merops n. nubicus)

The use of radio frequency identification (RFID) technology is common in animal‐monitoring applications in the wild and in zoological and agricultural settings. RFID is used to track animals and to collect information about movements and other behaviors, as well as to automate or improve husbandry. Disney's Animal Kingdom® uses passive RFID technology to monitor nest usage by a breeding colony of northern carmine bee‐eaters. We implemented RFID technologies in various equipment configurations, initially deploying low‐frequency (LF) 125 kHz RFID and later changing to high‐frequency (HF) 13.56 MHz RFID technology, to monitor breeding behavior in the flock. We installed antennas connected to RFID readers at the entrances of nest tunnels to detect RFID transponders attached to leg bands as birds entered and exited tunnels. Both LF‐RFID and HF‐RFID systems allowed the characterization of nest visitation, including the timing of nest activity, breeding pair formation, identification of egg‐laying females, participation by nonresidents, and detection of nest disruptions. However, we collected a substantially larger volume of data using the increased bandwidth and polling speed inherent with HF‐RFID, which permitted tag capture of multiple birds simultaneously and resulted in fewer missed nest visits in comparison to LF‐RFID. Herein, we describe the evolution of the RFID setups used to monitor nest usage for more than 7 years, the types of data that can be gained using RFID at nests, and how we used these data to gain insights into carmine bee‐eater breeding behavior and improve husbandry.     

The genetic architecture of Drosophila sensory bristle number

We have mapped quantitative trait loci (QTL) for Drosophila mechanosensory bristle number in six recombinant isogenic line (RIL) mapping populations, each of which was derived from an isogenic chromosome extracted from a line selected for high or low, sternopleural or abdominal bristle number and an isogenic wild-type chromosome. All RILs were evaluated as male and female F(1) progeny of crosses to both the selected and the wild-type parental chromosomes at three developmental temperatures (18 degrees, 25 degrees, and 28 degrees ). QTL for bristle number were mapped separately for each chromosome, trait, and environment by linkage to roo transposable element marker loci, using composite interval mapping. A total of 53 QTL were detected, of which 33 affected sternopleural bristle number, 31 affected abdominal bristle number, and 11 affected both traits. The effects of most QTL were conditional on sex (27%), temperature (14%), or both sex and temperature (30%). Epistatic interactions between QTL were also common. While many QTL mapped to the same location as candidate bristle development loci, several QTL regions did not encompass obvious candidate genes. These features are germane to evolutionary models for the maintenance of genetic variation for quantitative traits, but complicate efforts to understand the molecular genetic basis of variation for complex traits.     

Cardiac-restricted overexpression of extracellular matrix metalloproteinase inducer causes myocardial remodeling and dysfunction in aging mice

The matrix metalloproteinases (MMPs) play a pivotal role in adverse left ventricular (LV) myocardial remodeling. The transmembrane protein extracellular MMP inducer (EMMPRIN) causes increased MMP expression in vitro, and elevated levels occur in patients with LV failure. However, the direct consequences of a prolonged increase in the myocardial expression of EMMPRIN in vivo remained unexplored. Cardiac-restricted EMMPRIN expression (EMMPRINexp) was constructed in mice using the full-length human EMMPRIN gene ligated to the myosin heavy chain promoter, which yielded approximately a twofold increase in EMMPRIN compared with that of the age/strain-matched wild-type (WT) mice; EMMPRINexp (n=27) and WT (n=33) mice were examined at 3.2+/-0.1 or at 13.3+/-0.5 mo of age (n=43 and 26, respectively). LV end-diastolic volume (EDV) was similar in young EMMPRINexp and WT mice (54+/-2 vs. 57+/-3 microl), but LV ejection fraction (EF) was reduced (51+/-1 vs. 57+/-1%; P<0.05). In old EMMPRINexp mice, LV EDV was increased compared with WT mice values (76+/-3 vs. 58+/-3 microl; P<0.05) and LV EF was significantly reduced (45+/-1 vs. 57+/-2%; P<0.05). In EMMPRINexp old mice, myocardial MMP-2 and membrane type-1 MMP levels were increased by >50% from WT values (P<0.05) and were accompanied by a twofold higher collagen content (P<0.05). Persistent myocardial EMMPRINexp in aging mice caused increased levels of both soluble and membrane type MMPs, fibrosis, and was associated with adverse LV remodeling. These findings suggest that EMMPRIN is an upstream signaling pathway that can play a mechanistic role in adverse remodeling within the myocardium.