Fine Structure Mapping in Yeast with Sunlamp Radiation

The X-ray mapping procedure of Manney and Mortimer (1964) is the most widely applicable and convenient method for fine structure analysis in yeast, but suffers the disadvantage that suitable X-ray machines or gamma ray sources are very expensive. Although many other recombinogens are known, none gives a linear dose-response like X-rays and few are as convenient or give as reproducible results. Experiments with Saccharomyces cerevisiae reported in this paper show, however, that the near-ultraviolet radiation emitted by fluorescent sunlamps gives linear dose-response relations, as reproducible results as ionizing radiations, and map distances which correlate highly with those obtained by using (60)Co gamma rays. It is suggested that this convenient recombinogen may be a suitable low-cost substitute for ionizing radiations in fine structure mapping.     

Dielectric properties of hemoglobin and myoglobin. I. Influence of solvent and particle size on the dielectric dispersion

Dielectric dispersion measurements with aqueous solutions of hemoglobin and myoglobin have been performed in the frequency range from 100 kcps to 15 Mcps. The influence of preparation, particle size, and solvent conditions was studied. The results are analyzed in terms of an orientational polarization mechanism.     

FOWLER'S BACILLUS AND ITS PARASPORAL BODY

Fowler's bacillus is one of several organisms which form a non-viable inclusion or parasporal body during the process of sporulation. This body is globular and may be as large as or larger than the spore. Its position in the cell is not random; the spore is terminal and the body paracentral, lying between the spore and the remaining vegetative cell chromatin bodies. On completion of sporulation both spore and body are contained within an exosporium. The sequence in the development of the cell structures was followed in ultrathin sections of material fixed in permanganate. When sporulation is well advanced the body begins to grow from a single crystal, then presumably as a result of some disorientation in the growth process it develops as a multicrystalline body with the lattices orientated at different angles. When the body approximates the spore in size, a lamella coat is formed and an exosporium develops which eventually encircles the body and the spore. Other lamella systems microscopically similar to those surrounding the parasporal body develop free in the cytoplasm outside the exosporium. In both of these systems the number of lamellae is variable. The spore coat of Fowler's bacillus, consisting of an outer lamella layer and an inner unresolved amorphous layer has been found microscopically identical to the spore coat of B. cereus. In both organisms the lamella layer of the spore coat consists, in contrast to the other lamella systems, of a regular number of lamellae. Physiological tests would indicate that Fowler's bacillus is a variety of B. cereus.     

A Rapid Screening Test for Aflatoxin-synthesizing Aspergilli of the flavus-oryzae Group

A rapid test for the recognition of aflatoxin-synthesizing strains of the Aspergillus flavus–oryzae group is described. For this purpose the strains are cultivated on Czapek–Dox agar enriched with an aqueous extract of groundnuts, and in which sodium nitrate is replaced by ammonium chloride. Toxin production is observed by the production of a bright blue fluorescence in the medium when placed under an ultraviolet lamp.     

Production planning of a flexible manufacturing system in a material requirements planning environment

Early flexible manufacturing system (FMS) production planning models exhibited a variety of planning objectives; typically, these objectives were independent of the overall production environment. More recently, some researchers have proposed hierarchical production planning and scheduling models for FMS. In this article, we examine production planning of FMS in a material requirements planning (MRP) environment. We propose a hierarchical structure that integrates FMS production planning into a closed-loop MRP system. This structure gives rise to the FMS/MRP rough-cut capacity planning (FMRCP) problem, the FMS/MRP grouping and loading (FMGL) problem, and the FMS/MRP detailed scheduling problem. We examine the FMRCP and FMGL problems in detail and present mathematical programming models for each of these problems. In particular, the FMRCP problem is modeled as a generalized assignment problem (GAP), and a GAP-based heuristic procedure is defined for the problem. We define a two-phase heuristic for the FMGL problem and present computational experience with both heuristics. The FMRCP heuristic is shown to solve problems that exhibit a dependent-demand relation within the FMS and with FMS capacity utilization as high as 99 percent. The FMGL heuristic requires very little CPU time and obtains solutions to the test problems that are on average within 1.5 percent of a theoretical lower bound. This FMS/MRP production planning framework, together with the resulting models, constitutes an important step in the integration of FMS technology with MRP production planning. The hierarchical planning mechanism directly provides for system-level MRP planning priorities to induce appropriate production planning and control objectives on the FMS while simultaneously allowing for necessary feedback from the FMS. Moreover, by demonstrating the tractability of the FMRCP and FMGL problems, this research establishes the necessary groundwork upon which to explore systemwide issues pertaining to the coordination of the hierarchical structure.     

Xp-duplications with and without sex reversal

Duplications in Xp including the DSS (dosage sensitive sex reversal) region cause male to female sex reversal. We investigated two patients from families with Xp duplications. The first case was one of two sisters with karyotype 46,XY, der(22), t(X;22)(p11.3;p11)mat and unambiguous female genitalia. The living sister was developmentally retarded, and showed multiple dysmorphic features and an acrocallosal syndrome. The second case was a boy with a maternally inherited direct duplication of Xp21.3-pter with the breakpoint close to the DSS locus. He had multiple abnormalities and micropenis, but otherwise unambiguous male genitalia. We performed quantitative Southern blot analysis with probes from Xp22.13 to p21.2 to define the duplicated region. Clinical, cytogenetic, and molecular data from both patients were compared with those of previously reported related cases. A comparison of the extragenital symptoms revealed no differences between patients with or without sex reversal. In both cases, the symptoms were non-specific. Among 22 patients with a duplication in Xp, nine had unambiguous female genitalia and a well-documented duplication of the DSS region. Two patients with duplication of DSS showed ambiguous external genitalia. From these data, we conclude that induction of testicular tissue may start in these patients, but that the type of genitalia depends on the degree of subsequent degeneration by a gene in DSS.     

Focal increases in [Ca]i may account for apparent low Ca sensitivity in swine carotid artery

Estimates of [Ca²⁺]_i sensitivity in intact smooth muscle are frequently obtained by measuring [Ca²⁺]_i with indicators such as aequorin or Fura-2. We investigated whether focal in increases in [Ca²⁺]_i could impair such measures of [Ca²⁺]_i sensitivity. Stimulation of swine carotid artery with 10 μM histamine increased aequorin estimated [Ca²⁺]_i, Fura-2 estimated [Ca²⁺]_i and Ca²⁺ sensitivity without significantly altering the aequorin/Fura-2 ratio (an estimate of [Ca²⁺]_i homogeneity). Subsequent inhibition of Na⁺/Ca²⁺ exchange by replacement of Na⁺ in the PSS with choline⁺ significantly increased aequorin-estimated [Ca²⁺]_i but only minimally increased Fura-2 estimated [Ca²⁺]_i, myosin light chain (MLC) phosphorylation and force. This resulted in a large increase in the aequorin/Fura-2 ratio, suggesting an increase in [Ca²⁺] inhomogeneity. Addition of 100 μM histamine to tissues in the choline⁺ buffer initially increased both aequorin and Fura-2 estimated [Ca²⁺]_i but after 10 min exposure both of the [Ca²⁺]_i estimates declined to pre-histamine levels. Histamine addition significantly increased MLC phosphorylation and force, indicating increased Ca²⁺ sensitivity, but the aequorin/Fura-2 ratio remained elevated and uncharged from pre-histamine values. These data show that under certain conditions, aequorin and Fura-2 can yield widely differing estimates of [Ca²⁺]_i, and thus can cause misleading assessments of Ca²⁺ sensitization mechanisms. These discrepancies may arise from inhomogeneous or focal increases in [Ca²⁺]_i which can be evaluated with the aequorin/Fura-2 ratio.     

Multidrug resistance evaluation by confocal microscopy in primary urothelial cancer explant colonies

Assessing functional multidrug resistance (MDR) status in clinical biopsy material using drug autofluorescence has potential applications to clinical management. The small size of many cystoscopy specimens has led us to develop, as an alternative to flow cytometry, a protocol for studying epirubicin accumulation in adherent colonies of primary bladder cancer cells viewed live andin situ by confocal microscopy. The limitations to quantitation inherent in this technique are compensated for by preservation of cellular organisation and the elimination of non-malignant cells. Biopsy material is disaggregated and explanted into culture-grade petri dishes. After incubation for three to seven days plaques of epithelial cells have developed. Classical patterns of sensitive and resistant drug distribution are observed. Cells of the rolled edges of the colony accumulate more drug than those of the inner epithelial monolayer. Some central areas of larger colonies give the appearance of drug arrested at the intercellular junctions to give a fenestrated pattern. These observations contribute to the understanding of mechanisms in MDR as well as forming the basis for a clinical urological MDR evaluation protocol.