Life cycle assessment of lightweight and end-of-life scenarios for generic compact class passenger vehicles

Goal, Scope and Background  The automotive industry has a long history in improving the environmental performance of vehicles - fuel economy and emission improvements, introduction of recycled and renewable materials, etc. The European Union also aims at improving the environmental performance of products by reducing, in particular, waste resulting from End-of-Life Vehicles (ELVs) for example. The European Commission estimates that ELVs contribute to approximately 1 % of the total waste in Europe [9]. Other European Union strategies are considering more life cycle aspects, as well as other impacts including resource or climate change. This article is summarizing the results of a European Commission funded project (LIRECAR) that aims at identifying the environmental impacts and relevance for combinations of recycling / recovery and lightweight vehicle design options over the whole life cycle of a vehicle - i.e. manufacturing, use and recycling/recovery. Three, independent and scientific LCA experts reviewed the study according to ISO 14040. From the beginning, representatives of all Life Cycle Stakeholders have been involved (European materials & supplier associations, an environmental Non-Governmental Organization, recycler’s association). Model and System Definition  The study compared 3 sets of theoretical vehicle weight scenarios: 1000 kg reference (material range of today’s end-of-life, mid-sized vehicles produced in the early 1990’s) and 2 lightweight scenarios for 100 kg and 250 kg less weight based on reference functions (in terms of comfort, safety, etc.) and a vehicle concept. The scenarios are represented by their material range of a broad range of lightweight strategies of most European car manufacturers. In parallel, three End-of-Life (EOL) scenarios are considered: EOL today and two theoretical extreme scenarios (100% recycling, respectively, 100% recovery of shredder residue fractions that are disposed of today). The technical and economical feasibility of the studied scenarios is not taken into consideration (e.g. 100% recycling is not possible). Results and Discussion  Significant differences between the various, studied weight scenarios were determined in several scenarios for the environmental categories of global warming, ozone depletion, photochemical oxidant creation (summer smog), abiotic resource depletion, and hazardous waste. However, these improvement potentials can be only realized under well defined conditions (e.g. material compositions, specific fuel reduction values and EOL credits) based on case-by-case assessments for improvements over the course of the life cycle. Looking at the studied scenarios, the relative contribution of the EOL phase represents 5% or less of the total life cycle impact for most selected impact categories and scenarios. The EOL technology variations studied do not impact significantly the considered environmental impacts. Exceptions include total waste, as long as stockpile goods (overburden, tailings and ore/coal processing residues) and EOL credits are considered. Conclusions and Recommendations  LIRECAR focuses only on lightweight/recycling, questions whereas other measures (changes in safety or comfort standards, propulsion improvements for CO₂, user behavior) are beyond the scope of the study. The conclusions are also not necessarily transferable to other vehicle concepts. However, for the question of end-of-life options, it can be concluded that LIRECAR cannot support any general recommendation and/or mandatory actions to improve recycling if lightweight is affected. Also, looking at each vehicle, no justification could be found for the general assumption that lightweight and recycling greatly influence the affected environmental dimension (Global Warming Potential or resource depletion and waste, respectively). LIRECAR showed that this general assumption is not true under all analyzed circumstances and not as significant as suggested. Further discussions and product development targets shall not focus on generic targets that define the approach/technology concerned with how to achieve environmental improvement (weight reduction [kg], recycling quota [%]), but on overall life cycle improvement). To enable this case-by-case assessment, exchanges of necessary information with suppliers are especially relevant.     

DNA modification by oxovanadium(IV) complexes of salen derivatives

Oxovanadium(IV) complexes of hydroxysalen derivatives have been prepared and tested as DNA reactive agents. The nuclease activity has been investigated under oxidative or reducing conditions, on the basis of the various oxidation states of vanadium: V^III, V^IV and V^V. In the absence of an activating agent, none of the compounds tested was able to induce cleavage of DNA, whereas in the presence of mercaptopropionic acid (MPA) or Oxone the four complexes induced DNA modifications. Under both conditions, the para-hydroxy complex was found to be the most active compound. Reaction of these salen complexes with DNA occurs essentially at guanine residues and is more efficient in the presence of Oxone than under reducing conditions. The extent of Oxone-mediated DNA oxidation by the four vanadyl complexes was clearly superior to VOSO₄ and was observed without piperidine treatment. EPR studies provided information on the reactive metal-oxo species involved under each conditions and a mechanism of reaction with DNA is discussed.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00775-004-0529-0Abbreviations BPE buffer bis-phosphate EDTA buffer - DMPO 5,5-dimethylpyrroline N-oxide - DMS dimethyl sulfate - HFS hyperfine structure - Lin linear - MPA 3-mercaptopropionic acid - Nck nicked - salen (salicylidene)ethylenediamine - Sc supercoiled - TBE buffer tris-borate EDTA buffer - Tris tris(hydroxymethyl)aminomethane     

Sra-1 interacts with Kette and Wasp and is required for neuronal and bristle development in Drosophila

Regulation of growth cone and cell motility involves the coordinated control of F-actin dynamics. An important regulator of F-actin formation is the Arp2/3 complex, which in turn is activated by Wasp and Wave. A complex comprising Kette/Nap1, Sra-1/Pir121/CYFIP, Abi and HSPC300 modulates the activity of Wave and Wasp. We present the characterization of Drosophila Sra-1 (specifically Rac1-associated protein 1). sra-1 and kette are spatially and temporally co-expressed, and both encoded proteins interact in vivo. During late embryonic and larval development, the Sra-1 protein is found in the neuropile. Outgrowing photoreceptor neurons express high levels of Sra-1 also in growth cones. Expression of double stranded sra-1 RNA in photoreceptor neurons leads to a stalling of axonal growth. Following knockdown of sra-1 function in motoneurons, we noted abnormal neuromuscular junctions similar to what we determined for hypomorphic kette mutations. Similar mutant phenotypes were induced after expression of membrane-bound Sra-1 that lacks the Kette-binding domain, suggesting that sra-1 function is mediated through kette. Furthermore, we could show that both proteins stabilize each other and directly control the regulation of the F-actin cytoskeleton in a Wasp-dependent manner.     

The Drosophila ARF6-GEF Schizo controls commissure formation by regulating Slit

The CNS of bilateral symmetric organisms is characterized by intensive contralateral axonal connections. Genetic screens in Drosophila have identified only a few genes required for guiding commissural growth cones toward and across the midline. Two evolutionarily conserved signaling molecules, Netrin and Slit, are expressed in the CNS midline cells. Netrin acts primarily as an attractive signaling cue, whereas Slit mediates repulsive functions. Here, we describe a detailed analysis of the Drosophila gene schizo, which is required for commissure formation. schizo leads to a commissural phenotype reminiscent of netrin mutant embryos. Double-mutant analyses indicate that Netrin and Schizo act independently. The schizo mutant phenotype can be suppressed by either expressing netrin in the CNS midline cells or by a reduction of the slit gene dose, indicating that the balance of attractive and repulsive signaling is impaired in schizo mutants. Overexpression of the schizo RNA in the CNS midline using the GAL4/UAS system leads to a slit phenocopy, suggesting that schizo primarily antagonizes Slit signaling. This is further supported by cell type-specific rescue experiments. The schizo gene generates at least two proteins containing a conserved Sec7 and a pleckstrin homology domain (PH) characteristic for guanine nucleotide exchange factors (GEF) acting on ARF GTPases, which are known to regulate endocytosis. In support of the notion that schizo regulates Slit expression via endocytosis, we found that block of endocytosis leads to a schizo-like phenotype. We thus propose that the balance of the two signaling cues Netrin and Slit can be regulated, controlling membrane dynamics.     

Species Survival in Fragmented Landscapes: Where to From Here?

We summarise the contributions of empiricists, modellers, and practitioners in this issue of Biodiversity and Conservation, and highlight the most important areas for future research on species survival in fragmented landscapes. Under the theme uncertainty in research and management, we highlight five areas for future research. First, we know little about the effects of density dependence on the viability of metapopulations, a requirement for fragmented landscapes. Second, successful early attempts suggest that it is worth developing more rigorous calibration methods for population viability analysis with spatially explicit, individual-based models. In particular, the balance between model complexity, ease of calibration, and precision, needs to be addressed. Third, we need to improve methods to discriminate between models, including alternatives to time-series approaches. Fourth, when our ability to reduce model uncertainty is weak, we need to incorporate this uncertainty in population viability analysis. Fifth, population viability analysis and decision analysis can be integrated to make uncertainty an explicit part of the decision process. An important future direction is extending the decision framework to adaptive management. Under the theme tools for quantifying risk and predicting species sensitivity to fragmentation, we highlight three areas for future research. First, we need to develop tools to support comparative approaches to population viability analysis. Second, population modelling can be used to find rules of thumb to support conservation decisions when very little is known about a species. Rules of thumb need to be extended to the problem of managing for multiple species. Third, species traits might be useful for predicting sensitivity but predictions could be further refined by considering the relative importance of population processes at different scales. Under the theme tools for reassembling fragmented landscapes, we consider the focal species approach, and highlight aspects of the approach that require more rigorous testing. Finally, we highlight two important areas for future research not presented in the previous themes or papers in this volume. First, we need to incorporate the deterministic effects of habitat modification into the modelling framework of population viability analysis. Second, an avenue of research that remains largely unexplored is the combination of landscape-scale experiments and population modelling, especially using data from existing fragmentation experiments and from experiments designed to test the effects of defragmenting landscapes.     

High-resolution imaging reveals a limit in spatial resolution of blood flow measurements by microspheres

Density of 15-microm microspheres after left atrial application is the standard measure of regional perfusion. In the heart, substantial differences in microsphere density are seen at spatial resolutions <5 ml, implying perfusion heterogeneity. Microsphere deposition imaging permits a superior evaluation of the distribution pattern. Therefore, fluorescent microspheres (FMS) were applied, FMS deposition in the canine heart was imaged by epifluorescence microscopy in vitro, and the patterns were observed compared with MR images of iron oxide microspheres (IMS) obtained in vivo and in vitro. FMS deposition in myocardial slices revealed the following: 1) a nonrandom distribution, with sequentially applied FMS of different color stacked within the same vessel, 2) general FMS clustering, and 3) rather large areas devoid of FMS (n = 3). This pattern was also seen in reconstructed three-dimensional images (<1 nl resolution) of FMS distribution (n = 4). Surprisingly, the deposition pattern of sequentially applied FMS remained virtually identical over 3 days. Augmenting flow by intracoronary adenosine (>2 microM) enhanced local microsphere density, but did not alter the deposition pattern (n = 3). The nonrandom, temporally stable pattern was quantitatively confirmed by a three-dimensional intermicrosphere distance analysis of sequentially applied FMS. T2-weighted short-axis MR images (2-microl resolution) of IMS revealed similar patterns in vivo and in vitro (n = 6), as seen with FMS. The observed temporally stable microsphere patterns are not consistent with the notion that microsphere deposition is solely governed by blood flow. We propose that at high spatial resolution (<2 microl) structural aspects of the vascular network dominate microsphere distribution, resulting in the organized patterns observed.     

Distribution of Chitinases in the Entomopathogen <Emphasis Type="Italic">Metarhizium anisopliae</Emphasis> and Effect of <Emphasis Type="Italic">N</Emphasis>-Acetylglucosamine in Protein Secretion

For a long time, fungi have been characterized by their ability to secrete enzymes, mostly hydrolytic in function, and thus are defined as extracellular degraders. Chitin and chitinolytic enzymes are gaining importance for their biotechnological applications. Particularly, chitinases are used in agriculture to control plant pathogens. Metarhizium anisopliae produces an extracellular chitinase when grown on a medium containing chitin, indicating that synthesis is subject to induction by the substrate. Various sugar combinations were investigated for induction and repression of chitinase. N-acetylglucosamine (GlcNAc) shows a special dual regulation on chitinase production. M. anisopliae has at least two distinct, cell-bound, chitinolytic enzymes when cultured with GlcNAc as one of the carbon sources, and we suggest that this carbohydrate has an important role in protein secretion.     

Enhancement of vitamin E production in sunflower cell cultures

The most biologically active component of vitamin E, -tocopherol, is synthesized in its most effective stereoisomeric form only by photosynthetic organisms. Using sunflower cell cultures, a suitable in vitro production system of natural -tocopherol was established. The most efficient medium was found to be MS basal medium with naphthaleneacetic acid and 6-benzylaminopurine with the addition of casaminoacids and myo-inositol. Culture feeding experiments using biosynthetic precursors showed that -tocopherol production improved by 30% when homogentisic acid was used. Interestingly, time-course experiments with sunflower suspension cultures showed a possible increase of 78% in -tocopherol production when using cultures of longer subculture intervals. Compared to the starting plant tissue, an overall 100% increase of -tocopherol was reached by these sunflower cell cultures.