Monoclonal antibodies targeting the HR2 domain and the region immediately upstream of the HR2 of the S protein neutralize in vitro infection of severe acute respiratory syndrome coronavirus

We have previously shown that an Escherichia coli-expressed, denatured spike (S) protein fragment of the severe acute respiratory coronavirus, containing residues 1029 to 1192 which include the heptad repeat 2 (HR2) domain, was able to induce neutralizing polyclonal antibodies (C. T. Keng, A. Zhang, S. Shen, K. M. Lip, B. C. Fielding, T. H. Tan, C. F. Chou, C. B. Loh, S. Wang, J. Fu, X. Yang, S. G. Lim, W. Hong, and Y. J. Tan, J. Virol. 79:3289-3296, 2005). In this study, monoclonal antibodies (MAbs) were raised against this fragment to identify the linear neutralizing epitopes in the functional domain and to investigate the mechanisms involved in neutralization. Eighteen hybridomas secreting the S protein-specific MAbs were obtained. Binding sites of these MAbs were mapped to four linear epitopes. Two of them were located within the HR2 region and two immediately upstream of the HR2 domain. MAbs targeting these epitopes showed in vitro neutralizing activities and were able to inhibit cell-cell membrane fusion. These results provide evidence of novel neutralizing epitopes that are located in the HR2 domain and the spacer region immediately upstream of the HR2 of the S protein.     

Discovery of 3-phenyl-1H-5-pyrazolylamine derivatives containing a urea pharmacophore as potent and efficacious inhibitors of FMS-like tyrosine kinase-3 (FLT3)

Preclinical investigations and early clinical trials suggest that FLT3 inhibitors are a viable therapy for acute myeloid leukemia. However, early clinical data have been underwhelming due to incomplete inhibition of FLT3. We have developed 3-phenyl-1H-5-pyrazolylamine as an efficient template for kinase inhibitors. Structure–activity relationships led to the discovery of sulfonamide, carbamate and urea series of FLT3 inhibitors. Previous studies showed that the sulfonamide 4 and carbamate 5 series were potent and selective FLT3 inhibitors with good in vivo efficacy. Herein, we describe the urea series, which we found to be potent inhibitors of FLT3 and VEGFR2. Some inhibited growth of FLT3-mutated MOLM-13 cells more strongly than the FLT3 inhibitors sorafenib (2) and ABT-869 (3). In preliminary in vivo toxicity studies of the four most active compounds, 10f was found to be the least toxic. A further in vivo efficacy study demonstrated that 10f achieved complete tumor regression in a higher proportion of MOLM-13 xenograft mice than 4 and 5 (70% vs 10% and 40%). These results show that compound 10f possesses improved pharmacologic and selectivity profiles and could be more effective than previously disclosed FLT3 inhibitors in the treatment of acute myeloid leukemia.     

Celecoxib-Induced Cytotoxic Effect Is Potentiated by Inhibition of Autophagy in Human Urothelial Carcinoma Cells

Celecoxib, a cyclooxygenase-2 (COX-2) inhibitor, can elicit anti-tumor effects in various malignancies. Here, we sought to clarify the role of autophagy in celecoxib-induced cytotoxicity in human urothelial carcinoma (UC) cells. The results shows celecoxib induced cellular stress response such as endoplasmic reticulum (ER) stress, phosopho-SAPK/JNK, and phosopho-c-Jun as well as autophagosome formation in UC cells. Inhibition of autophagy by 3-methyladenine (3-MA), bafilomycin A1 or ATG7 knockdown potentiated celecoxib-induced apoptosis. Up-regulation of autophagy by rapamycin or GFP-LC3B-transfection alleviated celecoxib-induced cytotoxicity in UC cells. Taken together, the inhibition of autophagy enhances therapeutic efficacy of celecoxib in UC cells, suggesting a novel therapeutic strategy against UC.     

Prediction of beta-turns with learning machines

The support vector machine approach was introduced to predict the beta-turns in proteins. The overall self-consistency rate by the re-substitution test for the training or learning dataset reached 100%. Both the training dataset and independent testing dataset were taken from Chou [J. Pept. Res. 49 (1997) 120]. The success prediction rates by the jackknife test for the beta-turn subset of 455 tetrapeptides and non-beta-turn subset of 3807 tetrapeptides in the training dataset were 58.1 and 98.4%, respectively. The success rates with the independent dataset test for the beta-turn subset of 110 tetrapeptides and non-beta-turn subset of 30,231 tetrapeptides were 69.1 and 97.3%, respectively. The results obtained from this study support the conclusion that the residue-coupled effect along a tetrapeptide is important for the formation of a beta-turn.     

DNMT3b protects centromere integrity by restricting R-loop-mediated DNA damage

This study used DNA methyltransferase 3b (DNMT3b) knockout cells and the functional loss of DNMT3b mutation in immunodeficiency-centromeric instability-facial anomalies syndrome (ICF) cells to understand how DNMT3b dysfunction causes genome instability. We demonstrated that R-loops contribute to DNA damages in DNMT3b knockout and ICF cells. More prominent DNA damage signal in DNMT3b knockout cells was due to the loss of DNMT3b expression and the acquirement of p53 mutation. Genome-wide ChIP-sequencing mapped DNA damage sites at satellite repetitive DNA sequences including (peri-)centromere regions. However, the steady-state levels of (peri-)centromeric R-loops were reduced in DNMT3b knockout and ICF cells. Our analysis indicates that XPG and XPF endonucleases-mediated cleavages remove (peri-)centromeric R-loops to generate DNA beaks, causing chromosome instability. DNMT3b dysfunctions clearly increase R-loops susceptibility to the cleavage process. Finally, we showed that DNA double-strand breaks (DSBs) in centromere are probably repaired by error-prone end-joining pathway in ICF cells. Thus, DNMT3 dysfunctions undermine the integrity of centromere by R-loop-mediated DNA damages and repair.Subject terms: Double-strand DNA breaks, DNA methylation, Primary immunodeficiency disorders     

Fibrin(ogen) peptide B beta 15-42 inhibits platelet aggregation and fibrinogen binding to activated platelets

The binding of fibrinogen to activated platelets leads to platelet aggregation. Fibrinogen has multiple binding sites to platelet membrane glycoprotein IIb-IIIa complex. At least two well-defined sequences in fibrinogen, Arg-Gly-Asp sequence of A alpha 95-97 and A alpha 572-574 and gamma 400-411, have been shown to interact with glycoprotein IIb-IIIa. A possible binding site on the amino-terminal end of fibrinogen to platelet glycoprotein IIb-IIIa has also been reported. In this paper the effect of synthetic peptides derived from the amino-terminal end of the B beta chain on platelet aggregation and fibrinogen binding has been examined. B beta 15-42 peptide inhibits platelet aggregation and 125I-fibrinogen binding to activated platelets in a dose-dependent manner. Since B beta 15-42 contains a previously identified fibrinogen binding site, B beta 15-18, exposed by thrombin cleavage of native fibrinogen, we also examined the effect of B beta 15-18, B beta 19-42, and B beta 1-14 (fibrinopeptide B) on platelet aggregation and fibrinogen binding. Synthetic fibrinopeptide B and B beta 15-18 had no effect on platelet aggregation and fibrinogen binding while B beta 19-42 retained the inhibitory effect. When fibrinogen is chromatographed on a column of agarose-bound B beta 15-42, a cation-dependent retention of fibrinogen on the peptide column was observed, and fibrinogen was eluted from the column by B beta 15-42 but not by B beta 1-14. Under the same conditions, platelet glycoprotein IIb-IIIa was not retained in the column. Thus, the observed inhibitory effect is due to its interaction with fibrinogen rather than to platelet glycoprotein IIb-IIIa.(ABSTRACT TRUNCATED AT 250 WORDS)     

A sputtered thin film of nanostructured Ni/Pt/Ti on Al2O3 substrate for ethanol sensing

A novel thin film ethanol sensor using sputtered Ni/Pt/Ti on an Al2O3 substrate as the working electrode in an alkaline solution was developed. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to characterize the nanostructure of nickel films. Sputtering deposition conditions for maximum catalytic efficiency, electrode selectivity, and reproducibility were discussed. The results showed that ethanol oxidation was more efficient on the sputtered Ni/Pt/Ti on an Al2O3 substrate electrode than that on the conventional nickel electrode. The optimal operating conditions to generate the sputtered Ni/Pt/Ti on the Al2O3 substrate electrode were: 45 min of Ni sputtering deposition time, and 50 W of Ni sputtering power. The results also indicated that the response time of the prepared ethanol sensor is 27 s and the best sensitivity is 3.08 microA microM(-1) cm(-2).     

Evaluation of microwave hyperthermia applicators.

Hyperthermia has been used in conjunction with radiation and chemotherapy for cancer treatment. When using electromagnetic heating, applicators are critical components in contact with or in proximity to patients and can be the determining factor for effective and safe treatment. Tissue absorption of electromagnetic energy is determined by many factors. Three cases are shown to illustrate the complexity of microwave heating: 1) The BSD MA-151 applicator has good center heating on a muscle-only phantom as shown in the operation manual. When fat slabs of 0.25, 0.5, 1, and 2 cm thick were added, two hot spots near the periphery of the applicator were evident on all fat surfaces, exposed at 631 MHz. At 915 MHz, the heating was elongated on the surface of the models with 0.25- and 2-cm fat, and two hot spots were observed on the 0.5- and 1-cm fat surfaces. 2) Heating patterns of the Clini-Therm applicators on a muscle-only phantom, as indicated in the operations guide, are elliptical with their major axes perpendicular to the electric field. However, when a bolus is used, the elliptical pattern is parallel to the E field. 3) Heating patterns in cylindrical structures were studied with inhomogeneous models of limbs. Arm and thigh models consisting of fat, bone, and muscle material were heated with Clini-Therm L, M, and MS applicators at 915 MHz. In addition to the geometric effect, the results indicated that placing the applicators with E field parallel to the long axis of cylindrical structures can minimize required power, produce less heating of fats and reduce stray radiation. In conclusion, to apply penetrating microwave or other RF fields for tissue heating, one must simulate the clinical exposure conditions as closely as possible to obtain useful heating patterns.     

Variation of geosmin content in Anabaena cells and its relation to nitrogen utilization

The addition of the proper amount of ammonium to the culture medium containing nitrate as nitrogen source enhanced the growth rate of Anabaena viguieri. The amount of geosmin produced by these cells varied with the concentrations of ammonium added. A negative correlation between the amount of geosmin produced and of the growth rate of cells was revealed. This was also found in cells grown on various forms of nitrogen sources. Without supply of any nitrogen compound, this organism is capable of fixing gaseous nitrogen, and under these conditions the cells grew relatively slowly. However, they produced more geosmin (per unit protein mass) than cells grown in the presence of combined nitrogen. The isolation of heterocysts, in which nitrogen was fixed, showed that these cells produced higher amounts of geosmin than vegetative cells. The possible relation of nitrogen assimilation to the production of geosmin in the cells was discussed.