Molecular definition of red cell Rh haplotypes by tightly linked SphI RFLPs.

The Rh blood group system of human red cells contains five major antigens D, C/c, and E/e (the latter four designated "non-D") that are specified by eight gene complexes known as Rh haplotypes. In this paper, we report on the mapping of RH locus and identification of a set of SphI RFLPs that are tightly linked with the Rh structural genes. Using exon-specific probes, we have localized the SphI cleavage sites resulting in these DNA markers and derived a comprehensive map for the RH locus. It was found that the SphI fragments encompassing exons 4-7 of the Rh genes occur in four banding patterns or frameworks that correspond to the distribution and segregation of the common Rh haplotypes. This linkage disequilibrium allowed a genotype-phenotype correlation and direct determination of Rh zygosity related to the Rh-positive or Rh-negative status (D/D, D/d, and d/d). Studies on the occurrence of SphI RFLPs in a number of rare Rh variants indicated that Rh phenotypic diversity has taken place on different haplotype backgrounds and has arisen by diverse genetic mechanisms. The molecular definition of Rh haplotypes by SphI RFLP frameworks should provide a useful procedure for genetic counseling and prenatal assessment of Rh alloimmunization.     

Growth-Associated Production of Poly(3-Hydroxyvalerate) from n-Pentanol by a Methylotrophic Bacterium, Paracoccus denitrificans

Paracoccus denitrificans accumulated a polyester in its cells during growth on n-pentanol. The composition of the polyester varied during the cultivation: the level of the 3-hydroxyvalerate unit in the polyester increased, and eventually a homopolymeric poly(3-hydroxyvalerate) [P(3HV)] accumulated to an amount 22 to 24% of the cell dry weight. Growth-associated polyester synthesis was considerably affected by n-pentanol when its concentration was controlled at several levels. Maximum accumulation of the polyester was obtained at 0.02% (vol/vol). Physical and mechanical characteristics of the P(3HV) were determined and compared with those of other homo- and copolyesters. The P(3HV) was dextrorotatory and had number-averaged and weight-averaged molecular masses of 128,000 and 888,000 Da, respectively, with a rate of polydispersity of 6.93. The level of tensile strength of the P(3HV) was lower, and its extension to break was higher than that of the poly(3-hydroxybutyrate) homopolyester.     

Myosin VIIA mutation screening in 189 Usher syndrome type 1 patients.

Usher syndrome type 1b (USH1B) is an autosomal recessive disorder characterized by congenital profound hearing loss, vestibular abnormalities, and retinitis pigmentosa. The disorder has recently been shown to be caused by mutations in the myosin VIIa gene (MYO7A) located on 11q14. In the current study, a panel of 189 genetically independent Usher I cases were screened for the presence of mutations in the N-terminal coding portion of the motor domain of MYO7A by heteroduplex analysis of 14 exons. Twenty-three mutations were found segregating with the disease in 20 families. Of the 23 mutations, 13 were unique, and 2 of the 13 unique mutations (Arg212His and Arg212Cys) accounted for the greatest percentage of observed mutant alleles (8/23, 31%). Six of the 13 mutations caused premature stop codons, 6 caused changes in the amino acid sequence of the myosin VIIa protein, and 1 resulted in a splicing defect. Three patients were homozygotes or compound heterozygotes for mutant alleles; these three cases were Tyr333Stop/Tyr333Stop, Arg212His-Arg302His/Arg212His-Arg302His, and IVS13nt-8c-->g/Glu450Gln. All the other USH1B mutations observed were simple heterozygotes, and it is presumed that the mutation on the other allele is present in the unscreened regions of the gene. None of the mutations reported here were observed in 96 unrelated control samples, although several polymorphisms were detected. These results add three patients to single case reported previously where mutations have been found in both alleles and raises the total number of unique mutations in MYO7A to 16.     

Detection of membrane packing defects by time-resolved fluorescence depolarization.

Packing defects in lipid bilayer play a significant role in the biological activities of cell membranes. Time-resolved fluorescence depolarization has been used to detect and characterize the onset of packing defects in binary mixtures of dilinoleoylphosphatidylethanolamine/1-palmitoyl-2- oleoylphosphatidylcholine (PE/PC). These PE/PC mixtures exhibit mesoscopic packing defect state (D), as well as one-dimensional lambellar liquid crystalline (L alpha) and two-dimensional inverted hexagonal (HII) ordered phases. Based on previous electron microscopic investigations, this D state is characterized by the presence of interlamellar attachments and precursors of HII phase between the lipid layers. Using a rotational diffusion model for rod-shaped fluorophore in a curved matrix, rotational dynamics parameters, second rank order parameter, localized wobbling diffusion, and curvature-dependent rotational diffusion constants of dipyenylhexatriene (DPH)-labeled PC (DPH-PC) in the host PE/PC matrix were recovered from the measured fluorescence depolarization decays of DPH fluorescence. At approximately 60% PE, abrupt increases in these rotational dynamics parameters were observed, reflecting the onset of packing defects in the host PE/PC matrix. We have demonstrated that rotational dynamics parameters are very sensitive in detecting the onset of curvature-associating packing defects in lipid membranes. In addition, the presence of the D state can be characterized by the enhanced wobbling diffusional motion and order packing of lipid molecules, and by the presence of localized curvatures in the lipid layers.     

Demonstration of pH control in a commercial immobilized glucose isomerase

The synthesis of a variety of important biochemicals involves multistep enzyme-catalyzed reactions. In many cases, the optimal operating pH is much different for the individual enzymatic steps of such synthesis reactions. Yet, it may be beneficial if such reaction steps are combined or paired, allowing them to occur simultaneously, in proximity to one another, and at their respective optimal pH. This can be achieved by separating the micro-environments of the two steps of a reaction pathway using a thin urease layer that catalyzes an ammonia-forming reaction. In this article, the pH control system in a commercial immobilized glucose (xylose) isomerase pellet, which has an optimal pH of 7.5, is demonstrated. This system allows the glucose isomerase to have near its optimal pH activity when immersed in a bulk solution of pH 4.6. A theoretical analysis is also given for the effective fraction of the immobilized glucose isomerase, which remains active when the bulk pH is at 4.6 in the presence of 20 mM urea versus when the bulk pH is at its optimal pH of 7.5. Both theoretical and experimental results show that this pH control system works well in this case. (c) 1996 John Wiley & Sons, Inc.     

Secretion of recombinant proteins from hydroxyethyl methacrylate-methyl methacrylate capsules

Current human gene therapy relies on genetic modification of the patient's own cells. An alternate nonautologous approach is to use universal cell lines engineered to secrete therapeutic products. Protection with immunoisolation devices before implantation would allow the use of the same recombinant cell line for treating different patients, thus potentially lowering the cost of treatment. To study the properties of a mechanically stable synthetic biomaterial, hydroxyethyl methyacrylate-methyl methacrylate (HEMA-MMA) as the immuno-isolation device, we encapsulated recombinant mouse fibroblast cells engineered to secrete products ranging from 27 to 300 kDa in size (human growth hormone, mouse beta-hexosaminidase and beta-glucuronidase) in the presence or absence of the extracellular matrix Matrigel. Both viability and cell number in the microcapsules increased with time after encapsulation and cell morphology indicated viable cell growth, thus showing that the capsule membrane barrier was compatible with nutrient/waste exchange necessary for normal metabolic activity.The intracellular levels of these recombinant gene products were constant throughout the experimental period of 22 days in the presence or absence of Matrigel, thus demonstrating that the microenvironment did not lead to downregulation of the transgenes. However, the extracellular levels of the gene products secreted from the cells and trapped within the microcapsules were dependent on the molecular size of the product and presence of Matrigel. With the 27-kDa human growth hormone, the presence of Matrigel caused its retention within this intracapsular space, but its release from the microcapsules to the culture medium was not impeded. With the 120-kDa beta-hexosaminidase or the 300-kDa beta-glucuronidase, they were retained within the microcapsule space regardless of the presence or absence of Matrigel, and their passage from the microcapsules to the media was totally blocked. In conclusion, the HEMA-MMA microcapsules are supportive of recombinant cell growth and maintained their molecular cutoff at approximately 100 kDa. Inclusion of extracellular matrix was unable to improve cell growth and may impede the exit of some gene products. (c) 1996 John Wiley & Sons, Inc.     

Synthesis of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) by recombinant Escherichia coli

Several recombinant Escherichia coli strains, including XL1-Blue, JM109, HB101, and DH5alpha harboring a stable high-copynumber plasmid pSYL105 containing the Alcaligenes eutrophus polyhydroxyalkanoate (PHA) biosynthesis genes were constructed. These recombinant strains were examined for their ability to synthesize and accumulate poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer from glucose and either propionate or valerate. All recombinant E. coli strains could synthesize the P(3HB-co-3HV) copolymer in the medium containing glucose and propionate. However, only the homopolymer poly-(3-hydroxybutyrate) [P(3HB)] was synthesized from glucose and valerate. The PHA concentration and the 3HV fraction could be increased by inducing with acetate and/or oleate. When supplemented with oleate, the 3HV fraction increased by fourfold compared with that obtained without induction. Induction with propionate resulted in lower PHA concentration due to the inhibitory effect, but an 3HV fraction of as high as 33.0% could be obtained. These results suggest that P(3HB-co-3HV) can be efficiently produced from propionate by recombinant E. coli by inducing with acetate, propionate, or oleate. (c) 1996 John Wiley & Sons, Inc.     

Mapping of Unconventional Myosins in Mouse and Human

Myosins are molecular motors that move along filamentous actin. Seven classes of myosin are expressed in vertebrates: conventional myosin, or myosin-II, as well as the 6 unconventional myosin classes -I, -V, -VI, -VII, -IX, and -X. We have mapped in mouse 22 probes encompassing all known unconventional myosins and, as a result, have identified 16 potential unconventional myosin genes. These genes include 7 myosins-I, 2 myosins-V, 1 myosin-VI, 3 myosins-VII, 2 myosins-IX, and 1 myosin-X. The map location of 5 of these genes was identified in human chromosomes by fluorescencein situhybridization.