How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

How costly is clutch formation in the Audouin's Gull Larus audouinii?

During the Audouin's Gull's breeding season at the Ebro Delta in 1993, 24 fresh eggs from eight three-egg clutches (modal clutch-size) were collected at the peak of the laying period. Eggs were processed to obtain formalin-fixed yolks, which were halved and stained using the potassium dichromate method. Digitized images of the yolks were examined to assess the daily rates of yolk deposition. We used these data in combination with egg compositional analysis to build a model of energy demands during the formation of an average clutch in Audouin's Gull. To show how the different parameters of clutch formation affect the daily energy investment peak, we performed a simulation analysis in which the rapid yolk development (RYD) period, the follicle triggering interval (FTI), the laying interval (LI) and the albumen synthesis period (ASP) were allowed to vary simultaneously. In our sample, the mean RYD period was seven days with a range from six to eight days. There were no significant differences in yolk volume among eggs in a clutch, but albumen volume was significantly smaller in third eggs. According to our model the albumen synthesis of the a-egg coincides with the energy demand peak for clutch formation. This peak represents an increase by ca. 42% in female energy requirements. Values obtained from the simulation analysis showed that only the ASP of the a-egg and the RYD durations of the second and third follicles produced noticeable reductions in peak energy investment. We predict that in gulls, whose laying intervals seem to be kept constant, significant increases of the durations of the RYD periods of second and third eggs, or even significant reductions of yolk size of these eggs, may operate simultaneously to match the energy demands during clutch formation to the prevailing food conditions.     

The enhancement of electrostriction caused by lowering the solvent dielectric constant leads to the decrease of activation energy in trypsin catalysis.

The contribution of electrostriction of the solvent to the stabilization of the negatively charged tetrahedral transition state of a trypsin-catalyzed reaction was probed by means of kinetic studies involving high-pressure and solvent dielectric constant. A good correlation was observed between the increased catalytic efficiency of trypsin and the decreased solvent dielectric constant. When the dielectric constant of the solvents was lowered by 4.68 units, the loss of activation energy and that of free energy of activation were 2.26 kJ/mol and 3.09 kJ/mol, respectively. The activation volume for k(cat) decreased significantly as the dielectric constant of the solvent decreased, indicating that the degree of electrostriction of the solvent around the charged tetrahedral transition state has been enhanced. These observations demonstrate that the increase in the catalytic efficiency of the trypsin reaction with decreasing dielectric constant resulted from the stabilization of electrostatic energy for the formation of an oxyanion hole, and this stabilization was caused by the increase of electrostricted water around the charged tetrahedral transition state. Therefore, we conclude that control of the solvent dielectric constant can stabilize the tetrahedral transition state, and this lowers the activation energy.     

Changes in lung volume and deflation stability in hyaline membrane disease

Total lung capacity (TLC), inspiratory capacity, functional residual capacity, and deflation stability of prematurely delivered Macaca nemestrina primates were measured serially during development of, and recovery from, hyaline membrane disease (HMD) to relate changes in lung volumes to changes in deflation stability. Gestational age-matched primates that did not develop HMD served as controls. TLC, measured by N2 washout, fell at 2-12 h of age (P less than 0.0001) in animals with HMD and remained lower than controls for at least 48 h (P less than 0.005). However, deflation stability, defined as the fraction of TLC remaining upon deflation to 10 cm H2O, improved from 2 to 12 h of age (P less than 0.001). Postmortem studies confirm the measurements of TLC and deflation stability and provide evidence that interstitial thickening and obstruction of air spaces with debris may be partially responsible for the observed changes in TLC in primates that develop HMD. It has been assumed that TLC is reduced in HMD because of atelectasis from elevated alveolar surface tension, but the sequential measurements in these animals suggest that other mechanisms also contribute.     

The channel properties of possible gramicidin dimers

Extending previous work (Sung & Jordan, 1987 a, Biophys. J. 51, 661-672; 1988, Biophys. J.54, 519-526), we describe channel properties of five possible gramicidin dimers by studying dimerization energies and axial electrical potentials. Unlike the head-to-head dimer (the predominant channel former), both tail-to-tail and head-to-tail dimers with the same beta-helical monomer structure as the head-to-head dimer only form four intermonomer hydrogen bonds and are much less stable. Were channels formed from these dimers to be observed, their electrical potential profiles suggest that they should be cation selective, probably conduct less than the head-to-head dimer, have a central cation binding site, bind cations preferentially if crystallizable, and in the case of the head-to-tail dimer, rectify. Like the antiparallel double stranded helical dimer (a possible minor conducting pathway) the parallel double stranded helical dimer has 28 interstrand hydrogen bonds, but its hydrogen bond network is quite distorted and it is much less stable. If it formed, its electrical potential profile suggests that it would be cation selective, bind anions preferentially if crystallizable, rectify, and at high enough voltages, might exhibit a conductance greater than that of the antiparallel form.     

Mouse blastocyst immunosurgery with commercial antiserum to mouse erythrocytes

Summary Immunosurgery is a useful technique for the isolation of inner cell masses from murine blastocysts. Conventionally, rabbit antisera made ad hoc against murine splenic or fetal cells or fibroblasts have been used as antibody sources. We investigated the feasibility of using commercially available rabbit antiserum to murine erythrocytes (anti-RBC) and compared it with rabbit antiserum generated ad hoc to murine L-cells (anti-L-cell). Our results indicate that anti-RBC is at least as effective as anti-L-cell serum for the immunosurgical isolation of inner cell masses, which became either miniblastocysts (later forming outgrowths) or embryoid bodies (undergoing ectoderm-endodermlike differentiation within 48 h). Because anti-RBC is commercially available, the technical modification described herein increases the accessibility of the immunosurgical protocol for the isolation of murine inner cell masses.