Comparative analysis of otolith morphology in three species of <Emphasis Type="Italic">Scomber</Emphasis>

Geometric morphometrics is a quick and reliable approach to differentiate fish stocks based on the variation of otolith shapes. In this study, morphometric analysis of otolith shapes was used to differentiate three species of Scomber. The sagittae morphology of S. scombrus otolith is totally different from that of S. japonicus and S. australasicus. Multivariate analysis consistently showed that S. japonicus was morphologically similar to S. australasicus, whereas a significant difference in otolith shapes was detected between S. scombrus and other two species of Scomber. The rostrum, antirostrum, excisural notch and dorsal-posterior margin of the otolith reflect the main variations between the three species of Scomber. Shape indices and Fourier coefficients were used to discriminate fish species using analysis of variance and Fisher discriminant analysis. The shape indices successfully differentiated 100%, 95.7% and 96.4% of otoliths in S. japonicus, S. australasicus and S. scombrus, respectively, while the Fourier coefficients only discriminated 70.0%, 61.9% and 91.3% of the sagittae in S. japonicus, S. australasicus and S. scombrus. This study indicates that the shape analysis on the sagittae morphometrics of otoliths is a better method to differentiate species of Scomber.     

g‐C3N4‐Based Heterostructured Photocatalysts

Photocatalysis is considered as one of the promising routes to solve the energy and environmental crises by utilizing solar energy. Graphitic carbon nitride (g‐C₃N₄) has attracted worldwide attention due to its visible‐light activity, facile synthesis from low‐cost materials, chemical stability, and unique layered structure. However, the pure g‐C₃N₄ photocatalyst still suffers from its low separation efficiency of photogenerated charge carriers, which results in unsatisfactory photocatalytic activity. Recently, g‐C₃N₄‐based heterostructures have become research hotspots for their greatly enhanced charge carrier separation efficiency and photocatalytic performance. According to the different transfer mechanisms of photogenerated charge carriers between g‐C₃N₄ and the coupled components, the g‐C₃N₄‐based heterostructured photocatalysts can be divided into the following categories: g‐C₃N₄‐based conventional type II heterojunction, g‐C₃N₄‐based Z‐scheme heterojunction, g‐C₃N₄‐based p–n heterojunction, g‐C₃N₄/metal heterostructure, and g‐C₃N₄/carbon heterostructure. This review summarizes the recent significant progress on the design of g‐C₃N₄‐based heterostructured photocatalysts and their special separation/transfer mechanisms of photogenerated charge carriers. Moreover, their applications in environmental and energy fields, e.g., water splitting, carbon dioxide reduction, and degradation of pollutants, are also reviewed. Finally, some concluding remarks and perspectives on the challenges and opportunities for exploring advanced g‐C₃N₄‐based heterostructured photocatalysts are presented.     

Understanding the Impact of Oligomeric Polystyrene Side Chain Arrangement on the All‐Polymer Solar Cell Performance

The introduction of oligomeric polystyrene (PS) side chains into the conjugated backbone is proven to enhance the processability and electronic properties of semiconducting polymers. Here, two series of donor and acceptor polymers are prepared with different molar percentages of PS side chains to elucidate the effect of their substitution arrangement on the all‐polymer solar cell performance. The observed device performance is lower when the PS side chains are substituted on the donor polymer and higher when on the acceptor polymer, indicating a clear arrangement effect of the PS side chain. The incorporation of PS side chains to the acceptor polymer contributes to the decrease in phase separation domain size in the blend films. However, the reduced domain size was still an order of magnitude larger than the typical exciton diffusion length. A detailed morphological study together with the estimation of solubility parameter of the pristine PS, donor, and acceptor polymers reveals that the relative value of solubility parameter of each component dominantly contributes to the purity of the phase separated domain, which strongly impacts the amount of generated photocurrent and overall solar cell performance. This study provides an understanding of the design strategies to improve the all‐polymer solar cells.     

Rational Design of Nickel Hydroxide‐Based Nanocrystals on Graphene for Ultrafast Energy Storage

Compact, light, and powerful energy storage devices are urgently needed for many emerging applications; however, the development of advanced power sources relies heavily on advances in materials innovation. Here, the findings in rational design, one‐pot synthesis, and characterization of a series of Ni hydroxide‐based electrode materials in alkaline media for fast energy storage are reported. Under the guidance of density functional theory calculations and experimental investigations, a composite electrode composed of Co‐/Mn‐substituted Ni hydroxides grown on reduced graphene oxide (rGO) is designed and prepared, demonstrating capacities of 665 and 427 C g^?1 at current densities of 2 and 20 A g^?1, respectively. The superior performance is attributed mainly to the low deprotonation energy and the facile electron transport, as elaborated by theoretical calculations. When coupled with an electrode based on organic molecular‐modified rGO, the resulting hybrid device demonstrates an energy density of 74.7 W h kg^?1 at a power density of 1.68 kW kg^?1 while maintaining capacity retention of 91% after 10,000 cycles (20 A g^?1). The findings not only provide a promising electrode material for high‐performance hybrid capacitors but also open a new avenue toward knowledge‐based design of efficient electrode materials for other energy storage applications.     

Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid‐State Li Batteries

Solid‐state Li batteries using Na⁺ superionic conductor type solid electrolyte attracts wide interest because of its safety and high theoretical energy density. The NASCION type solid electrolyte LAGP (Li_1.5Al_0.5Ge_0.5P₃O₁₂) shows favorable conductivity as well as good mechanical strength to prevent Li dendrite penetration. However, the instability of LAGP with Li metal remains a great challenge. In this work, an amorphous Ge thin film is sputtered on an LAGP surface, which can not only suppress the reduction reaction of Ge⁴⁺ and Li, but also produces intimate contact between the Li metal and the LAGP solid electrolyte. The symmetric cell with the Ge‐coated LAGP solid electrolyte shows superior stability and cycle performance for 100 cycles at 0.1 mA cm^?2. A quasi‐solid‐state Li–air battery has also been assembled to further demonstrate this advantage. A stable cycling performance of 30 cycles in ambient air can be obtained. This work helps to achieve a stable and ionic conducting interface in solid‐state Li batteries.     

CuS Microspheres with Tunable Interlayer Space and Micropore as a High‐Rate and Long‐Life Anode for Sodium‐Ion Batteries

Layered transition metal sulfides (LTMSs) have tremendous commercial potential in anode materials for sodium‐ion batteries (SIBs) in large‐scale energy storage application. However, it is a great challenge for most LTMS electrodes to have long cycling life and high‐rate capability due to their larger volume expansion and the formation of soluble polysulfide intermediates caused by the conversion reaction. Herein, layered CuS microspheres with tunable interlayer space and pore volumes are reported through a cost‐effective interaction method using a cationic surfactant of cetyltrimethyl ammonium bromide (CTAB). The CuS–CTAB microsphere as an anode for SIBs reveals a high reversible capacity of 684.6 mAh g^?1 at 0.1 A g^?1, and 312.5 mAh g^?1 at 10 A g^?1 after 1000 cycles with high capacity retention of 90.6%. The excellent electrochemical performance is attributed to the unique structure of this material, and a high pseudocapacitive contribution ensures its high‐rate performance. Moreover, in situ X‐ray diffraction is applied to investigate their sodium storage mechanism. It is found that the long chain CTAB in the CuS provides buffer space, traps polysulfides, and restrains the further growth of Cu particles during the conversion reaction process that ensure the long cycling stability and high reversibility of the electrode material.     

Probing the interaction of cephalosporin with bovine serum albumin: A structural and comparative perspective

Cephalosporins belong the largest class of antibiotics used in the treatment of a wide range of infectious diseases caused by susceptible organisms. In the present study, we chose two typical antibiotics cefalexin/cefixime based on their structure, and investigated the interaction of cephalexin/cefixime with bovine serum albumin (BSA) using UV–vis absorption spectra, fluorescence spectroscopy, circular dichroism (CD) spectroscopy and molecular modeling approaches. Spectroscopic experiments revealed the formation of a BSA ? cefalexin/cefixime complex. The binding parameters calculated using a modified Stern ? Volmer method and the Scatchard method reached 10³–10⁴ L·mol^?1. Thermodynamic parameter studies revealed that binding characteristics by negative enthalpy and positive entropy changes, and electrostatic interactions play a major role. Site marker competitive displacement experiments and molecular modeling approaches demonstrated that cefalexin and cefixime bind with appropriate affinity to site I (subdomain IIA) of BSA. Furthermore, synchronous fluorescence spectra, CD spectra and molecular modeling results indicated that the secondary structure of BSA was changed in the presence of cefalexin and cefixime. Additionally, the effects of metal ions on the BSA ? cefalexin/cefixime system were also assessed.     

Effects of interaction with sulphur compounds and free volume in imidazolium-based ionic liquid on desulphurisation: a molecular dynamics study

Interaction energy with sulphur compounds and free volume in imidazolium-based ionic liquid were calculated by molecular dynamics (MD) simulations to examine their effects on desulphurisation. From microstructure analysis and energy contribution calculation, it is found that an increasing fractional free volume in ionic liquid and an enhancement of interaction with solute by tuning the structure of ionic liquid or oxidising sulphur compounds are favourable for desulphurisation, which allows more efficient packing of sulphur compounds in ionic liquids and more easily extraction of sulphur compounds from fuel. The MD results are in good agreement with experimental desulphurisation performance.     

流行性出血热免疫球蛋白的研制

本文首次报告采用纯化灭活流行性出血热（ＥＨＦ）Ⅰ型疫苗免疫健康献血员,采集ＥＨＦ抗体高滴度的血浆,用低温乙醇法及盐析法分离纯化三批ＥＨＦ免疫球蛋白。结果表明：（１）采用０,１,３,４（月）或０,１,４,５（月）免疫程序,疫苗剂量１～２ｍｌ（０．１５～０．３０ｍｇ蛋白）,受免献血员血清平均抗体滴度可达１∶４０６（ＥＬＩＳＡ）或１∶１１２（ＲＰＨＩ）。（２）通过生化检定,三批制品的电泳纯度为９７．０５％,９６．８４％,９９．２６％;ＩｇＧ单体和二聚体含量为８９．５５％,９１．３０％和９８．２１％。（３）用空斑抑制中和试验及免疫印染试验证明所纯化的免疫球蛋白具有抗ＥＨＦ病毒特异性。（４）三批ＥＨＦ免疫球蛋白的效价测定,结果为ＥＬＩＳＡ滴度≥１∶５１２,ＲＰＨＩ滴度≥１∶１０２４,ＰＲＮＴ（中和抗体）滴度１∶４０。按１６％蛋白计,ＥＨＦ免疫球蛋白的效价可达原料血浆的１０倍以上。（５）无菌、安全、毒性及热原质试验检定结果,全部通过《中国生物制品规程》要求。