Replacement of Ca by Ni in a Perovskite Titanate to Yield a Novel Perovskite Exsolution Architecture for Oxygen‐Evolution Reactions

For efficient catalysis and electrocatalysis well‐designed, high‐surface‐area support architectures covered with highly dispersed metal nanoparticles with good catalyst‐support interactions are required. In situ grown Ni nanoparticles on perovskites have been recently reported to enhance catalytic activities in high‐temperature systems such as solid oxide cells (SOCs). However, the micrometer‐scale primary particles prepared by conventional solid‐state reactions have limited surface area and tend to retain much of the active catalytic element within the bulk, limiting efficacy of such exsolution processes in low‐temperature systems. Here, a new, highly efficient, solvothermal route is demonstrated to exsolution from smaller scale primary particles. Furthermore, unlike previous reports of B‐site exsolution, it seems that the metal nanoparticles are exsolved from the A‐site of these perovskites. The catalysts show large active site areas and strong metal‐support interaction (SMSI), leading to ≈26% higher geometric activity (25 times higher mass activity with 1.4 V of E_on‐set) and stability for oxygen‐evolution reaction (OER) with only 0.72 µg base metal contents compared to typical 20 wt% Ni/C and even commercial 20 wt% Ir/C. The findings obtained here demonstrate the potential design and development of heterogeneous catalysts in various low‐temperature electrochemical systems including alkaline fuel cells and metal–air batteries.     

Synthesis of Novel Aryloxyethylamine Derivatives and Evaluation of Their in Vitro and in Vivo Neuroprotective Activities

A series of aryloxyethylamine derivatives were designed, synthesized and evaluated for their biological activity. Their structures were confirmed by ¹H‐NMR, ¹³C‐NMR, FT‐IR and HR‐ESI‐MS. The preliminary screening of neuroprotection of compounds in vitro was detected by MTT, and the anti‐ischemic activity in vivo was tested using bilateral common carotid artery occlusion in mice. Most of these compounds showed potential neuroprotective effects against the glutamate‐induced cell death in differentiated rat pheochromocytoma cells (PC12 cells), especially for (4‐fluorophenyl){1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}methanone, {1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}(4‐methoxyphenyl)methanone, (4‐bromophenyl){1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}methanone, {1‐[2‐(4‐chlorophenoxy)ethyl]piperidin‐4‐yl}(4‐chlorophenyl)methanone, (4‐chlorophenyl)(1‐{2‐[(naphthalen‐2‐yl)oxy]ethyl}piperidin‐4‐yl)methanone, (4‐chlorophenyl){1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}methanone and {1‐[2‐(4‐bromophenoxy)ethyl]piperidin‐4‐yl}(4‐chlorophenyl)methanone, which exhibited potent protection of PC12 cells at three doses (0.1, 1.0, 10 μM). Compounds (4‐fluorophenyl){1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}methanone, (4‐fluorophenyl){1‐[2‐(naphthalen‐2‐yloxy)ethyl]piperidin‐4‐yl}methanone, {1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}(4‐methoxyphenyl)methanone and {1‐[2‐(4‐chlorophenoxy)ethyl]piperidin‐4‐yl}(4‐chlorophenyl)methanone possessed the significant prolongation of the survival time of mice subjected to acute cerebral ischemia and decreased the mortality rate at all five doses tested (200, 100, 50, 25, 12.5 mg/kg) and had significant neuroprotective activity. In addition, (4‐fluorophenyl){1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}methanone, {1‐[2‐(4‐methoxyphenoxy)ethyl]piperidin‐4‐yl}(4‐methoxyphenyl)methanone and {1‐[2‐(4‐chlorophenoxy)ethyl]piperidin‐4‐yl}(4‐chlorophenyl)methanone possessed outstanding neuroprotection in vitro and in vivo. These compounds can be used as a promising neuroprotective agents for future development of new anti‐ischemic stroke agents. Basic structure–activity relationships are also presented.     

2D Metal Zn Nanostructure Electrodes for High‐Performance Zn Ion Supercapacitors

Recent supercapacitors show a high power density with long‐term cycle life time in energy‐powering applications. A supercapacitor based on a single metal electrode accompanying multivalent cations, multiple charging/discharging kinetics, and high electrical conductivity is a promising energy‐storing system that replaces conventionally used oxide and sulfide materials. Here, a hierarchically nanostructured 2D‐Zn metal electrode‐ion supercapacitor (ZIC) is reported which significantly enhances the ion diffusion ability and overall energy storage performance. Those nanostructures can also be successfully plated on various flat‐type and fiber‐type current collectors by a controlled electroplating method. The ZIC exhibits excellent pseudocapacitive performance with a high energy density of 208 W h kg^?1 and a power density from 500 W kg^?1, which are significantly higher than those of previously reported supercapacitors with oxide and sulfide materials. Furthermore, the fiber‐type ZIC also shows high energy‐storing performance, outstanding mechanical flexibility, and waterproof characteristics, without any significant capacitance degradation during bending tests. These results highlight the promising possibility of nanostructured 2D Zn metal electrodes with the controlled electroplating method for future energy storage applications.     

Unifying Charge Generation,Recombination, and Extraction in Low‐Offset Non‐Fullerene Acceptor Organic Solar Cells

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor π? π interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs.     

Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells

There has been considerable progress over the last decade in development of the perovskite solar cells (PSCs), with reported performances now surpassing 25.2% power conversion efficiency. Both long‐term stability and component costs of PSCs remain to be addressed by the research community, using hole transporting materials (HTMs) such as 2,2′,7,7′‐tetrakis(N,N′‐di‐pmethoxyphenylamino)‐9,9′‐spirbiuorene(Spiro‐OMeTAD) and poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine] (PTAA). HTMs are essential for high‐performance PSC devices. Although effective, these materials require a relatively high degree of doping with additives to improve charge mobility and interlayer/substrate compatibility, introducing doping‐induced stability issues with these HTMs, and further, additional costs and experimental complexity associated with using these doped materials. This article reviews dopant‐free organic HTMs for PSCs, outlining reports of structures with promising properties toward achieving low‐cost, effective, and scalable materials for devices with long‐term stability. It summarizes recent literature reports on non‐doped, alternative, and more stable HTMs used in PSCs as essential components for high‐efficiency cells, categorizing HTMs as reported for different PSC architectures in addition to use of dopant‐free small molecular and polymeric HTMs. Finally, an outlook and critical assessment of dopant‐free organic HTMs toward commercial application and insight into the development of stable PSC devices is provided.     

Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Promises of Main Group Metal–Based Nanostructured Materials for Electrochemical CO2 Reduction to Formate

Selective CO₂ reduction to formic acid or formate is the most technologically and economically viable approach to realize electrochemical CO₂ valorization. Main group metal–based (Sn, Bi, In, Pb, and Sb) nanostructured materials hold great promise, but are still confronted with several challenges. Here, the current status, challenges, and future opportunities of main group metal–based nanostructured materials for electrochemical CO₂ reduction to formate are reviewed. Firstly, the fundamentals of electrochemical CO₂ reduction are presented, including the technoeconomic viability of different products, possible reaction pathways, standard experimental procedure, and performance figures of merit. This is then followed by detailed discussions about different types of main group metal–based electrocatalyst materials, with an emphasis on underlying material design principles for promoting the reaction activity, selectivity, and stability. Subsequently, recent efforts on flow cells and membrane electrode assembly cells are reviewed so as to promote the current density as well as mechanistic studies using in situ characterization techniques. To conclude a short perspective is offered about the future opportunities and directions of this exciting field.     

Energy Harvesting from Breeze Wind (0.7–6 m s−1) Using Ultra‐Stretchable Triboelectric Nanogenerator

Wind is one of the most important sources of green energy, but the current technology for harvesting wind energy is only effective when the wind speed is beyond 3.5–4.0 m s^?1. This is mainly due to the limitation that the electromagnetic generator works best at high frequency. This means that light breezes cannot reach the wind velocity threshold of current wind turbines. Here, a high‐performance triboelectric nanogenerator (TENG) for efficiently harvesting energy from an ambient gentle wind, especially for speeds below 3 m s^?1 is reported, by taking advantage of the relative high efficiency of TENGs at low‐frequency. Attributed to the multiplied‐frequency vibration of ultra‐stretchable and perforated electrodes, an average output of 20 mW m^?3 can be achieved with inlet wind speed of 0.7 m s^?1, while an average energy conversion efficiency of 7.8% at wind speed of 2.5 m s^?1 is reached. A self‐charging power package is developed and the applicability of the TENG in various light breezes is demonstrated. This work demonstrates the advantages of TENG technology for breeze energy exploitation and proposes an effective supplementary approach for current employed wind turbines and micro energy structure.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.