Acquired immunity in rats against Angiostrongylus cantonensis infection

Acquired immunity against Angiostrongylus cantonensis was induced by immunizing rats with somatic antigens from fifth-stage larvae and adult worms and live third-stage larvae. Rats immunized twice had significantly fewer worms than rats immunized three times. Fewer worms were recovered from rats immunized with 200 live third-stage larvae than from any other groups. Rats immunized with somatic antigens had higher enzyme-linked immunosorbent assay (ELISA) antibody levels than rats immunized with live larvae. Rats immunized with live third-stage larvae of Angiostrongylus cantonensis were more strongly protected against challenge infections (62-92%) than rats immunized with antigens extracted from fifth-stage larvae (0-30%) and adult worms (11-24%).     

Evidence for presence of peptide alpha-amidating activity in pancreatic islets from newborn rats.

The peptide alpha-amidating activity of a homogenate of pancreatic islets from 5-7-day-old rats was investigated, using as substrate a glycine-extended tripeptide (D-Tyr-Val-Gly). The islet homogenates had a marked amidating activity, with a Km of 57 microM, a Vmax. of 185 pmol/h per mg and a pH optimum of 7.0. This activity was dependent on the presence of ascorbic acid (in the reduced form) and Cu2+, the optimum concentrations being 4 mM and 40 microM respectively. On fractionation of the homogenate, the highest specific activity was found in the soluble fraction. Exocrine pancreatic tissue showed very low levels of amidating activity.     

Yeast regulatory protein LEU3: a structure-function analysis.

Eleven mutations resulting in partially deleted or truncated LEU3 protein were generated by linker insertion or other modifications at restriction sites, deletion of restriction fragments, or oligonucleotide-directed mutagenesis. Functional studies of these mutants showed the following: (i) A specific DNA binding region is contained within the 173 N-terminal residues, but other regions of the protein are required for optimal binding. (ii) Activation of LEU2 expression depends on the C-terminal 113 residues of the LEU3 protein. (iii) Deletion of part or all of a central section of LEU3 eliminates the ability of the LEU3 protein to respond to the co-activator alpha-isopropylmalate, i.e. creates an unmodulated activator. (iv) Overproduction of unmodulated activator slows down cell growth. (v) Specific deletion of two short acidic regions, including one with net charge - 19, has only minor effects on activation and modulation.     

The effect of carbamylcholine on CFU-s differentiation

The proportion of spleen colony-forming units (CFU-s) killed by hydroxyurea was greatly increased after bone marrow cells (BMCs) from LACA mice were exposed to carbamylcholine (Cach; 1 X 10(-13) to 1 X 10(-9) in vitro and there was a marked change in the proportion of spleen colony types. Following treatment with Cach, granulocytic and mixed erythroid-type colonies increased from 20 to 26.3% and 16.1 to 29.6% in 9-day colonies and from 8.3 to 28.2% and 21.7 to 39.4% in 13-day colonies, respectively. Single cell suspensions of spleen colonies were made for granulocyte-macrophage progenitor (CFU-gm) and late erythroid progenitor (CFU-e) assays. The number of CFU-gm from Cach-treated BMC was about twice that from control BMC for both day 9 and day 13 groups; the number of CFU-e decreased relatively. The results suggest that cholinergic receptors on CFU-s may increase the tendency to differentiate into the granulocytic/monocytic line.     

A simple and easy-to-assemble device for polymerase chain reaction

In this paper we describe an efficient polymerase chain reaction device which is easy to assemble and requires minimal investment in dedicated equipment. The polymerase chain reaction device consists of three waterbaths, three dual-head peristaltic pumps, an electronic timer and a fabricated water jacket capable of holding microcentrifuge tubes. This device has been successfully used to amplify human factor X genomic DNA in our laboratory.     

A partial map of the barley genome incorporating restriction fragment length polymorphism, polymerase chain reaction, isozyme, and morphological marker loci

Nine low copy number genomic DNA clones, a ribosomal sequence, and seven cDNA clones were found to identify polymorphisms in cultivated barley (Hordeum vulgare L.). An F2 population consisting of 100 plants was produced from a cross between a high-yielding two-rowed feed barley cultivar and a genetic marker stock homozygous for nine recessive and one dominant morphological marker genes. Through the use of these 10 well-distributed marker genes, five previously mapped isozyme loci, and two storage-protein loci, the approximate recombinational location for each of 17 restriction fragment length polymorphism loci was estimated. One clone, pMSU21, identified variation that appeared to be the result of a small insertion-deletion event that differentiated two-rowed and six-rowed genotypes. This difference was characterized, and one allele was sequenced. Oligonucleotide primers that flanked the insertion-deletion event were synthesized, and DNA samples from the F2 population were subjected to polymerase chain reaction sequence amplification. The variation identified by this technique was determined to be allelic to the variation identified using pMSU21 in Southern blot analysis. Maps of previously undescribed informative clones are included.     

烟草抗黑胫病突变体的细胞筛选

经实验我们成功地建立了在细胞水平上筛选烟草抗黑胫病突变体的筛选体系。该体系的主要内容为:γ-射线500—2000拉德诱变高度感病品种的花药后用50—80％的黑胫病菌粗毒素为选择压力,筛选出抗毒素花粉植株,用离体叶片法测定选出抗病植株,再从后代鉴定中选出抗病性能够稳定遗传的突变系。γ-射线及高浓度毒素处理均能得到抗病植株。选自感病品种的花粉植株中约有9—50％是真正抗病的。这些抗病植株中有一部分的抗病性能够稳定遗传。用该法已从感病优质品种小黄金1025及乔庄黑苗中选出6个突变系。并自N.C.628(抗)×小黄金1025(感)及N.C.628(抗)×庆胜2号(感)的F_1花粉植株中选出4个抗病系。所有的抗病系经3—4代后均表现出稳定抗性。其中一个突变体(R400)的抗性似由不完全显性多基因控制。     

人体外周血淋巴细胞核损伤指标的比较研究

核异常作为组织特异性的遗传毒理体内短期检测法,现已日益受到重视。它比微核测试更敏感和合理。核异常包括多种形式的核损伤,而它们与致癌因子的损伤有着不同程度的相关性。本文以r-射线作为致癌与诱变因子,在人体外周血淋巴细胞中系统地比较研究了常用核损伤指标:微核、核变形、核碎裂和核固缩等的剂量(0-5Grag)一反应关系,并作线形回归分析。作者认为,作为人体淋巴细胞核异常测试法,应包括微核,核变形及核碎裂3个核损伤指标。     

Noninvasive determination of ulnar stiffness from mechanical response--in vivo comparison of stiffness and bone mineral content in humans

An approach referred to as Mechanical Response Tissue Analysis (MRTA) has been developed for the noninvasive determination of mechanical properties of the constituents of the intact limb. Of specific interest in the present study is the bending stiffness of the ulna. The point mechanical impedance properties in the low frequency regime, between 60 and 1,600 Hz are used. The procedure requires a proper design of the probe for good contact of the skin at midshaft and proper support of the proximal and distal ends of the forearm to obtain an approximation to "simple support" of the ulna. A seven-parameter model for the mechanical response is then valid, which includes the first mode of anterior-posterior beam bending of the ulna, the damping and spring effect of the soft tissue between probe and bone, and the damping of musculature. A dynamic analyzer (HP3562A) provides in seconds the impedance curve and the pole-zero curve fit. The physical parameters are obtained from a closed-form solution in terms of the curve-fit parameters. The procedure is automated and is robust and analytically reliable at about the five percent level. Some 80 human subjects have been evaluated by this mechanical response system and by the Norland single photon absorptiometer, providing for the first time in vivo, a comparison of elastic bending stiffness (ulna) and bone mineral content (radius). Three functional parameters of potential clinical value are the cross-sectional bending stiffness EI, the axial load capability Pcr (Euler buckling load) and the bone "sufficiency" S, defined as the ratio of Pcr to body weight. The correlation between EI and bone mineral (r = 0.81) is only slightly less than previous in vitro results with both measurements on the same bone (r = 0.89). When sufficiency is taken into consideration, the correlation of Pcr and bone mineral content is improved (r = 0.89). An implication is that "quality" of bone is a factor which is not indicated by bone mineral content but which is indicated by stiffness. Bone mineral is necessary for proper stiffness but not sufficient. Therefore mechanical measurement should provide a new dimension to be used toward a better understanding of the factors related to bone health and disease.