Highly stable enzyme precipitate coatings and their electrochemical applications

This paper describes highly stable enzyme precipitate coatings (EPCs) on electrospun polymer nanofibers and carbon nanotubes (CNTs), and their potential applications in the development of highly sensitive biosensors and high-powered biofuel cells. EPCs of glucose oxidase (GOx) were prepared by precipitating GOx molecules in the presence of ammonium sulfate, then cross-linking the precipitated GOx aggregates on covalently attached enzyme molecules on the surface of nanomaterials. EPCs-GOx not only improved enzyme loading, but also retained high enzyme stability. For example, EPC-GOx on CNTs showed a 50 times higher activity per unit weight of CNTs than the conventional approach of covalent attachment, and its initial activity was maintained with negligible loss for 200 days. EPC-GOx on CNTs was entrapped by Nafion to prepare enzyme electrodes for glucose sensors and biofuel cells. The EPC-GOx electrode showed a higher sensitivity and a lower detection limit than an electrode prepared with covalently attached GOx (CA-GOx). The CA-GOx electrode showed an 80% drop in sensitivity after thermal treatment at 50°C for 4 h, while the EPC-GOx electrode maintained its high sensitivity with negligible decrease under the same conditions. The use of EPC-GOx as the anode of a biofuel cell improved the power density, which was also stable even after thermal treatment of the enzyme anode at 50°C. The excellent stability of the EPC-GOx electrode together with its high current output create new potential for the practical applications of enzyme-based glucose sensors and biofuel cells.     

Toxin detection by Si photosensitive biosensors with a new measurement scheme

We propose a new type of photosensitive biosensor with a CMOS compatible Si photodiode integrated circuit, for the high-sensitive detection of small mycotoxin molecules requiring competitive assay approach. In this work, a photodiode is connected to the gate of a field effect transistor (FET) so that the open circuit voltage (V(OC)) of the illuminated photodiode is transferred into the drain/source current (I(DS)) of the FET. The sensing scheme employs competitive binding of toxin molecules (within the sample solution) and toxin-BSA conjugates (immobilized on the photodiode surface) with Au-nanoparticle-labeled antibodies, followed by silver enhancement to generate opaque structures on the photodiode surface. By utilizing the non-linear dependence of the V(OC) on the light intensity, we can maintain a sufficiently high signal resolution at low toxin concentrations (with most of the incident light blocked) for the competitive assay. By monitoring the I(DS) of the FET whose gate is driven by the V(OC), quantitative detection of Aflatoxin B1 has been achieved in the range of 0-15ppb.     

Long‐term cytological and histological outcomes in women managed with loop excision treatment under local anaesthetic for high‐grade cervical intraepithelial neoplasia

Y. L. Woo, C. Badley, E. Jackson and R. Crawford Long‐term cytological and histological outcomes in women managed with loop excision treatment under local anaesthetic for high‐grade cervical intraepithelial neoplasia Objective: This study examines the impact of excision margin status after large loop excision of the transformation zone (LLETZ) under local anaesthetic for high‐grade cervical intraepithelial neoplasia (HG‐CIN) on the cytological and histological outcomes up to 5 years after treatment. Methods: Prospective cytological and histological data were obtained by examination of the colposcopy database at Addenbrooke’s Hospital, Cambridge, UK. All women aged between 19 and 50 years who underwent treatment for HG‐CIN by LLETZ under local anaesthetic were included in the study. Patients without follow‐up data were excluded from the study. The excision margin status was correlated with the subsequent cytological and histological outcomes. Results: A series of 967 women with CIN2 and CIN3 underwent LLETZ excision under local anaesthetic. Overall, 42% of women had disease present at the excision margin following LLETZ. Women with CIN3 were more likely than those with CIN2 to have an involved excision margin (P < 0.0001). Cytological recurrence was highest at 12 months (16%) and did not correlate with the CIN grade or excision margin status. Histological recurrence/persistence was also highest at 12 months follow‐up (15%) and this correlated with grade of CIN and margin status (P < 0.0001). Conclusions: Histological recurrence/persistence correlates with grade of CIN and excision margin status. Management of HG‐CIN in an outpatient setting under local anaesthetic is safe, cost effective and yields a favourable long‐term outcome.     

Regenerative Surface Plasmon Resonance (SPR) biosensor: real-time measurement of fibrinogen in undiluted human serum using the competitive adsorption of proteins

Epidemiological studies suggest that elevated plasma fibrinogen levels are associated with an increased risk of cardiovascular disorders. Normal fibrinogen level is in the range of 1.5-4.5mg/mL, depending upon both genetic (intrinsic) and environmental (extrinsic) factors. An increase of 0.25mg/mL from the normal level can often be correlated with a high risk of cardiovascular disease. Thus, it is useful to monitor fibrinogen level in serum of a patient for clinical diagnosis. We report a regenerative biosensor that measures real-time fibrinogen levels in undiluted serum. The biosensor uses Surface Plasmon Resonance (SPR), highly sensitive optical technique. The biosensor does not use bio-receptors (i.e., antibodies, enzymes, DNA, etc.) unlike conventional biosensors, and deploys the nature of competitive adsorption of proteins to achieve selective detection of fibrinogen. We measured fibrinogen-spiked serum samples with a concentration of 1.5-4.5 mg/mL, and repeated six measurement trials to obtain statistical distribution of the measurements using the regeneration method of the sensing surface. The SPR biosensor has a sensitivity of 42 mDeg/(mg/mL) for a fibrinogen concentration in the range of 0.5-2.5 mg/mL, whereas it was hard to correlate the measurements to the spiked-fibrinogen samples of above 2.5 mg/mL.     

Effects of temperature shifts on growth rate and lipid characteristics of Synechocystis sp. PCC6803 in a bench-top photobioreactor

Synechocystis sp. PCC6803 exhibited a high degree of variation in biomass and lipid production rates in response to temperature changes in a photobioreactor. Compared with an optimal temperature of 30-33°C, a higher temperature of 44°C and lower temperatures of 22°C and 18°C severely inhibited the specific growth rate (up to a 66% decrease), biomass production rate (up to a 71% decrease), nutrient utilization rates (up to a 77% decrease), and lipid production rate (up to a 80% decrease). Temperature stress triggered changes in the relative percentage of individual fatty acids (mainly for C16:0 and C18:3), and degree of unsaturation significantly changed: 0.87 at 30°C, 0.62 at 44°C, and 1.29 at 18°C. Although PCC6803 survived temperature stress and maintained its predominate position in the culture, it could not fully recover from long-term temperature stress. Thus, avoiding prolonged exposure to extreme temperature is crucial for using PCC6803 as feedstock for biofuel production.     

Nitric oxide delivery system for biological media

Developing an understanding of how chronically elevated levels of nitric oxide at sites of inflammation or infection can lead to cancer and other diseases requires ways to expose cells and biomolecules to controlled concentrations of NO for hours to days. To achieve this, a small (65ml) stirred reactor was fabricated that included a flat, porous poly(tetrafluoroethylene) membrane and a loop of poly(dimethylsiloxane) tubing for NO and O(2) delivery, respectively. It was equipped with probes for continuous monitoring of NO and O(2) concentrations. Transport through the membrane and tubing was characterized using separate O(2) depletion experiments. In experiments using only a 10% NO mixture and a buffer that was initially air-equilibrated, constant rates of accumulation were observed for NO(2)(-) (53±2μM/h; n=8), the end product of NO oxidation, as expected. Simultaneous delivery of NO and O(2) yielded steady NO concentrations of 0.7-2.3μM, depending on the tubing length and gas compositions. A model was developed that allows the steady NO and O(2) concentrations and the duration of the transients to be predicted to within a few percent. This system should be useful for exposing cells and biomolecules to concentrations of NO that mimic those in vivo.