Effects of Feed Supplementation on Mineral Composition,Mechanical Properties and Structure in Femurs of Iberian Red Deer Hinds (Cervus elaphus hispanicus)

Few studies in wild animals have assessed changes in mineral profile in long bones and their implications for mechanical properties. We examined the effect of two diets differing in mineral content on the composition and mechanical properties of femora from two groups each with 13 free-ranging red deer hinds. Contents of Ca, P, Mg, K, Na, S, Cu, Fe, Mn, Se, Zn, B and Sr, Young’s modulus of elasticity (E), bending strength and work of fracture were assessed in the proximal part of the diaphysis (PD) and the mid-diaphysis (MD). Whole body measures were also recorded on the hinds. Compared to animals on control diets, those on supplemented diets increased live weight by 6.5 kg and their kidney fat index (KFI), but not carcass weight, body or organ size, femur size or cortical thickness. Supplemental feeding increased Mn content of bone by 23%, Cu by 9% and Zn by 6%. These differences showed a mean fourfold greater content of these minerals in supplemental diet, whereas femora did not reflect a 5.4 times greater content of major minerals (Na and P) in the diet. Lower content of B and Sr in supplemented diet also reduced femur B by 14% and Sr by 5%. There was a subtle effect of diet only on E and none on other mechanical properties. Thus, greater availability of microminerals but not major minerals in the diet is reflected in bone composition even before marked body effects, bone macro-structure or its mechanical properties are affected.     

Effects of pH,Salinity, Biomass Concentration,and Algal Organic Matter on Flocculant Efficiency of Synthetic Versus Natural Polymers for Harvesting Microalgae Biomass

This study investigated the effects of pH, salinity, biomass concentration, and algal organic matter (AOM) on the efficiency of four commercial cationic flocculants. The tannin-based biopolymers Tanfloc SG and SL and the polyacrylamide polymers Flopam FO 4800 SH and FO 4990 SH were tested for flocculation of two microalgae models, the freshwater Chlorella vulgaris and the marine Nannochloropsis oculata. Both biomass concentration and AOM presence affected all polymers evaluated, whereas salinity and pH affected only Flopam and Tanfloc, respectively. A restabilization effect due to overdosing was only observed for Flopam polymers and increasing Tanfloc dose resulted in improved efficiency. Flopam polymers showed a significant decrease in the maximum quantum yield of photosystem II as function of polymer dose for Chlorella, which supported the need for toxicological studies to assess the potential toxicity of Flopam. In overall, Tanfloc was not affected by salinity nor presented potential toxicity therefore being recommended for the flocculation of both freshwater and marine species.     

Diagrammatic scale for severity evaluation of the Eremanthus erythropappus–Puccinia velata pathosystem

Candeia (Eremanthus erythropappus (DC.) MacLeish), a native forest species from South America, has garnered commercial interest due to its production of essential oil that contains alpha-bisabolol. This compound is widely used in the pharmaceutical and cosmetics industry, with approximately 80% of Brazilian production being exported. Since candeia rust (Puccinia velata) has only been reported in Brazil, little is known about its epidemiology and control. There is no methodology to quantify rust severity in candeia, justifying the elaboration and validation of a diagrammatic scale containing eight levels of disease severity based on leaf area coverage (0.25%, 0.5%, 1%, 2%, 4%, 8%, 16% and 32%). In a natural sampling of disease in the field, 95% of the leaves showed severity below 16%, with the remaining 5% showing severities between 16% and 32% of leaf area. Validation of the proposed diagrammatic scale was performed by assessing the results from 10 inexperienced evaluators, performing evaluations of three leaves with different severity levels. The evaluations were performed at 7-day intervals; in the first instance, severity values were assigned without the diagrammatic scale, and for the second attempt, the scale proposed in this study was used. The accuracy and precision of the severity estimates produced by each evaluator compared to the real severity was analysed by linear regression and by Lin's statistics. The reproducibility of the estimates was evaluated by analysing the coefficient of determination of linear regressions by pairs of evaluators. The scale provided adequate levels of accuracy, precision, repeatability and reproducibility, indicating the proposed scale was a suitable method for quantifying the severity of candeia rust.     

Immobilization–stabilization of the lipase from Thermomyces lanuginosus: Critical role of chemical amination

This paper describes the immobilization and stabilization of the lipase from Thermomyces lanuginosus (TLL) on glyoxyl agarose. Enzymes attach to this support only by the reaction between several aldehyde groups of the support and several Lys residues on the external surface of the enzyme molecules at pH 10. However, this standard immobilization procedure is unsuitable for TLL lipase due to the low stability of TLL at pH 10 and its low content on Lys groups that makes that the immobilization process was quite slow. The chemical amination of TLL, after reversible immobilization on hydrophobic supports, has been shown to be a simple and efficient way to improve the multipoint covalent attachment of this enzyme. The modification enriches the enzyme surface in primary amino groups with low pKb, thus allowing the immobilization of the enzyme at lower pH values. The aminated enzyme was rapidly immobilized at pH 9 and 10, with activities recovery of approximately 70%. The immobilization of the chemically modified enzyme improved its stability by 5-fold when compared to the non-modified enzyme during thermal inactivation and by hundreds of times when the enzyme was inactivated in the presence of organic solvents, being both glyoxyl preparations more stable than the enzyme immobilized on bromocyanogen.     

FEV1 Is a Better Predictor of Mortality than FVC: The PLATINO Cohort Study

Objective

To determine whether the presence of chronic obstructive lung disease (COPD) and reduction of lung function parameters were predictors of mortality in a cohort.

Materials/Patients and Methods

Population based cohorts were followed in Montevideo, Santiago and Sao Paulo during 5, 6 and 9 years, respectively. Outcomes included all-cause, cardiovascular, respiratory and cancer mortality; exposures were COPD, forced expiratory volume in one second (FEV₁) and forced vital capacity (FVC). Cox regression was used for analyses. Sensitivity, specificity, positive and negative predictive values, receiver operator characteristics curves and Youden''s index were calculated.

Results

Main causes of death were cardiovascular, respiratory and cancer. Baseline COPD was associated with overall mortality (HR = 1.43 for FEV₁/FVC<LLN; 2.01 for GOLD 2-4; 1.46 for GOLD 1-4; 1.50 for FEV₁/FEV₆ <LLN). For cardiovascular mortality, significant associations were found with GOLD 2-4 (HR = 2.68) and with GOLD 1-4 (HR = 1.78) for both genders together (not among women). Low FEV₁ was risk for overall and respiratory mortality (both genders combined). FVC was not associated with overall mortality. For most COPD criteria sensitivity was low and specificity high. The area under the curve for FEV₁ was greater than for FVC for overall and cardiovascular mortality.

Answer to the Question

COPD and low FEV₁ are important predictors for overall and cardiovascular mortality in Latin America.     

Sugarcane (Saccharum X officinarum): A Reference Study for the Regulation of Genetically Modified Cultivars in Brazil

Global interest in sugarcane has increased significantly in recent years due to its economic impact on sustainable energy production. Sugarcane breeding and better agronomic practices have contributed to a huge increase in sugarcane yield in the last 30?years. Additional increases in sugarcane yield are expected to result from the use of biotechnology tools in the near future. Genetically modified (GM) sugarcane that incorporates genes to increase resistance to biotic and abiotic stresses could play a major role in achieving this goal. However, to bring GM sugarcane to the market, it is necessary to follow a regulatory process that will evaluate the environmental and health impacts of this crop. The regulatory review process is usually accomplished through a comparison of the biology and composition of the GM cultivar and a non-GM counterpart. This review intends to provide information on non-GM sugarcane biology, genetics, breeding, agronomic management, processing, products and byproducts, as well as the current technologies used to develop GM sugarcane, with the aim of assisting regulators in the decision-making process regarding the commercial release of GM sugarcane cultivars.     

Entomopathogenic nematodes for control of Phyllophaga georgiana (Coleoptera: Scarabaeidae) in cranberries

A series of laboratory and greenhouse experiments evaluated the entomopathogenic nematodes Steinernema scarabaei Stock & Koppenhöfer, Heterorhabditis bacteriophora Poinar, and H. zealandica Poinar for control of second- and third-instar cranberry white grub, Phyllophaga georgiana Horn (Coleoptera: Scarabaeidae), in cranberries. Steinernema scarabaei was the most effective species with 76–100% control at a rate of 2.5×10⁹ IJ/ha in the greenhouse experiments. H. zealandica and especially H. bacteriophora were generally less effective and required rates of 5×10⁹ IJ/ha for acceptable control. Larval stage had no effect on H. zealandica and H. bacteriophora performance, whereas S. scarabaei was more effective against third instars than second instars in the laboratory but not in the greenhouse experiments. Steinernema scarabaei, should it become commercially available, could be an effective alternative to chemical insecticides for P. georgiana management.     

An essential role for diet in exercise-mediated protection against dyslipidemia, inflammation and atherosclerosis in ApoE⁻/⁻ mice

Background

Diet and exercise promote cardiovascular health but their relative contributions to atherosclerosis are not fully known. The transition from a sedentary to active lifestyle requires increased caloric intake to achieve energy balance. Using atherosclerosis-prone ApoE-null mice we sought to determine whether the benefits of exercise for arterial disease are dependent on the food source of the additional calories.

Methods and Results

Mice were fed a high-fat diet (HF) for 4.5 months to initiate atherosclerosis after which time half were continued on HF while the other half were switched to a high protein/fish oil diet (HP). Half of each group underwent voluntary running. Food intake, running distance, body weight, lipids, inflammation markers, and atherosclerotic plaque were quantified. Two-way ANOVA tests were used to assess differences and interactions between groups. Exercised mice ran approximately 6-km per day with no difference between groups. Both groups increased food intake during exercise and there was a significant main effect of exercise F((1,44) = 9.86, p<0.01) without interaction. Diet or exercise produced significant independent effects on body weight (diet: F(1,52) = 6.85, p = 0.012; exercise: F(1,52) = 9.52, p<0.01) with no significant interaction. The combination of HP diet and exercise produced a greater decrease in total cholesterol (F(1, 46) = 7.9, p<0.01) and LDL (F(1, 46) = 7.33, p<0.01) with a large effect on the size of the interaction. HP diet and exercise independently reduced TGL and VLDL (p<0.05 and 0.001 respectively). Interleukin 6 and C-reactive protein were highest in the HF-sedentary group and were significantly reduced by exercise only in this group. Plaque accumulation in the aortic arch, a marker of cardiovascular events was reduced by the HP diet and the effect was significantly potentiated by exercise only in this group resulting in significant plaque regression (F1, 49 = 4.77, p<0.05).

Conclusion

In this model exercise is beneficial to combat dyslipidemia and protect from atherosclerosis only when combined with diet.     

Selective antibacterial activity of the cationic peptide PaDBS1R6 against Gram-negative bacteria

Infections caused by Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa foremost among them, constitute a major worldwide health problem. Bioinformatics methodologies are being used to rationally design new antimicrobial peptides, a potential alternative for treating these infections. One of the algorithms used to develop antimicrobial peptides is the Joker, which was used to design the peptide PaDBS1R6. This study evaluates the antibacterial activities of PaDBS1R6 in vitro and in vivo, characterizes the peptide interaction to target membranes, and investigates the PaDBS1R6 structure in contact with mimetic vesicles. Moreover, we demonstrate that PaDBS1R6 exhibits selective antimicrobial activity against Gram-negative bacteria. In the presence of negatively charged and zwitterionic lipids the structural arrangement of PaDBS1R6 transits from random coil to α-helix, as characterized by circular dichroism. The tertiary structure of PaDBS1R6 was determined by NMR in zwitterionic dodecylphosphocholine (DPC) micelles. In conclusion, PaDBS1R6 is a candidate for the treatment of nosocomial infections caused by Gram-negative bacteria, as template for producing other antimicrobial agents.