Antibacterial Activity,Cytotoxicity and Mechanisms of action of Cathelicidin Peptides against Enteric Pathogens in Weaning Piglets

In the last few decades, long-term and high-dose usage of antibiotics in livestock diets has led to the emergence of antibiotic resistant bacteria, antibiotic residues in animal products and environmental pollution, adversely affecting animal health. Because of these concerns, a study screening cathelicidin peptides from different animal origins (i.e. protegrin-1 [PG-1], PMAP-23, LL-37, indolicidin and cathelicidin-BF [C-BF]) as antibiotic replacements with higher antimicrobial activity and lower cytotoxicity was designed to study their mechanisms towards enteric pathogens in weaning piglets. PG-1 and C-BF proved to be the most effective bacteriocids with the widest spectra of activity, with the MIC values equal to or lower than commonly used antibiotics towards several Escherichia and Salmonella strains, and showed a synergistic effect with aureomycin. Mechanism studies suggested the C-BF killing mechanism is based on membrane permeability, while multiple targets maybe exist for PG-1, including membrane and intracellular biomacromolecules. Cytotoxicity tests showed PMAP-23 and C-BF exhibited the lowest cytotoxic effects, while PG-1, LL-37 and indolicidin displayed cytotoxicity by dose. This study demonstrated that among the peptides tested, C-BF has the capacity to inactivate enteric pathogens with lower cytotoxicity and is potentially a novel anti-bacterial agent. The activity of PG-1 is highly efficient, with the potential to reduce cytotoxicity using molecular design.     

The effect of calciums on molecular motions of proteinase K

The native serine protease proteinase K binds two calcium cations. It has been reported that Ca²⁺ removal decreased the enzyme’s thermal stability and to some extent the substrate affinity, but has discrepant effects on catalytic activity of the enzyme. Molecular dynamics simulations were performed on the Ca²⁺-bound and Ca²⁺-free proteases to investigate the mechanism by which the calciums affect the structural stability, molecular motions, and catalytic activity of proteinase K. Very similar structural properties were observed between these two forms of proteinase K during simulations; and several long-lived hydrogen bonds and salt bridges common to both forms of proteinase K were found to be crucial in maintaining the local conformations around these two Ca²⁺ sites. Although Ca²⁺ removal enhanced the overall flexibility of proteinase K, the flexibility in a limited number of segments surrounding the substrate-binding pockets decreased. The largest differences in the equilibrium structures of the two simulations indicate that, upon the removal of Ca²⁺, the large concerted motion originating from the Ca1 site can transmit to the substrate-binding regions but not to the catalytic triad residues. In conjunction with the large overlap of the essential subspaces between the two simulations, these results not only provide insight into the dynamics of the underlying molecular mechanism responsible for the unchanged enzymatic activity as well as the decreased thermal stability and substrate affinity of proteinase K upon Ca²⁺ removal, but also complement the experimentally determined structural and biochemical data.     

Equivalent potential of water for the electronic structure of glycine

First-principles, all-electron, ab initio calculations have been performed to construct an equivalent potential of water for the electronic structure of glycine (Gly) in solution. The calculation involved three steps. The first step was to search for the minimum-energy geometric structure of the Gly + nH₂O system. The second step was to calculate the electronic structure of Gly with the potential of water molecules via the self-consistent cluster-embedding method (SCCE), based on the result obtained in the first step. The last step was to calculate the electronic structure of Gly with the potential of dipoles after replacing the water molecules with dipoles. The results show that the occupied molecular orbitals of Gly are raised by about 0.0524 Ry on average due to the effect of water. The effect of water can be simulated well using the dipole potential. The equivalent potential obtained can be applied directly to electronic structure calculations of proteins in solution using the SCCE method.     

Aqueous solubility of a diatomic molecule as a function of its size &; electronegativity difference

The aqueous solubility of a diatomic molecule as a function of its size & electronegativity difference is investigated. The electronegativity of a diatomic molecule will be calculated using five different electronegativity scales, namely, Pauling [1], Allred-Rochow [2], Mulliken [3, 4], Parr-Yang [5], and Sanderson [6, 7]. It is hypothesized here that at a given pH, temperature, and pressure, the solubility of a diatomic molecule in water will be a function of its polar character; in particular, electronegativity difference and of its molecular size. Different forms of the solubility function were tested; it was found that the solubility model, given by Eq. 3, which is based on different electronegativity scales and the molecular volume, adequately describes the aqueous solubility of alkali halides. The aqueous solubility of alkali halides exhibits maximum at the condition of high electronegativity difference and large molecular volume. On the other hand, the minimum solubility region is observed at very low molecular volume and medium to slightly high values of electronegativity difference. The minimum solubility is also observed at low value of electronegativity difference and high molecular volume. Finally, the general trend of solubility of alkali halides, based on the proposed model (Eq. 3) could be explained in terms of the trade-off between electrostatic interactions (solid lattice side) and the entropic effects (water side).     

Cellulose accessibility limits the effectiveness of minimum cellulase loading on the efficient hydrolysis of pretreated lignocellulosic substrates

A range of lignocellulosic feedstocks (including agricultural, softwood and hardwood substrates) were pretreated with either sulfur dioxide-catalyzed steam or an ethanol organosolv procedure to try to establish a reliable assessment of the factors governing the minimum protein loading that could be used to achieve efficient hydrolysis. A statistical design approach was first used to define what might constitute the minimum protein loading (cellulases and β-glucosidase) that could be used to achieve efficient saccharification (defined as at least 70% glucan conversion) of the pretreated substrates after 72 hours of hydrolysis. The likely substrate factors that limit cellulose availability/accessibility were assessed, and then compared with the optimized minimum amounts of protein used to obtain effective hydrolysis. The optimized minimum protein loadings to achieve efficient hydrolysis of seven pretreated substrates ranged between 18 and 63 mg protein per gram of glucan. Within the similarly pretreated group of lignocellulosic feedstocks, the agricultural residues (corn stover and corn fiber) required significantly lower protein loadings to achieve efficient hydrolysis than did the pretreated woody biomass (poplar, douglas fir and lodgepole pine). Regardless of the substantial differences in the source, structure and chemical composition of the feedstocks, and the difference in the pretreatment technology used, the protein loading required to achieve efficient hydrolysis of lignocellulosic substrates was strongly dependent on the accessibility of the cellulosic component of each of the substrates. We found that cellulose-rich substrates with highly accessible cellulose, as assessed by the Simons' stain method, required a lower protein loading per gram of glucan to obtain efficient hydrolysis compared with substrates containing less accessible cellulose. These results suggest that the rate-limiting step during hydrolysis is not the catalytic cleavage of the cellulose chains per se, but rather the limited accessibility of the enzymes to the cellulose chains due to the physical structure of the cellulosic substrate.     

The whole-organism heavy chain B cell repertoire from Zebrafish self-organizes into distinct network features

Background  

The adaptive immune system is based on selected populations of molecularly distinct individual B and T cell clones. However, it has not been possible to characterize these clones in a comprehensive and informatics manner to date; attempts have been limited by the number of cells in the adaptive immune system and an inability to quantify them. Recently, using the Zebrafish (ZF) Danio rerio as a model organism and parallel sequencing as the quantifying technology, Weinstein et al. overcame this major hurdle and quantified the entire heavy chain B-cell repertoire in ZF. Here, we present a novel network analysis of the data from the Weinstein group, providing new insights into the network structure of the B-cell repertoire.     

A Note on Correction of Information Time in a Survival Trial Using an Alpha Spending Function

Spending functions allow flexible monitoring of a clinical trial in that neither the number nor timing of the interim analyses need be pre-specified. Instead, we specify a function dictating the amount of alpha to be spent by different fractions of information. With a survival outcome, information is proportional to the number of patients who will have an event by the end of the trial. If the initial estimate of the number of events is incorrect, then we will spend an undesirable amount of alpha at interim looks. This note shows that for the most popular spending functions, which spend very little alpha early, we can fix an underestimate of the final information with very little effect on the boundaries.     

Sex Differences in the Association of Thigh Fat and Metabolic Risk in Older Adults

We have previously shown a favorable association of subcutaneous leg fat with markers of insulin resistance and dyslipidemia in postmenopausal women. It is not known whether there is a sex dimorphism in the association of lower‐body adiposity with reduced metabolic risk. Thus, our primary aim was to determine whether the favorable association of thigh subcutaneous fat, independent of abdominal fat, is also observed in older men. Mid‐thigh and abdominal fat areas were measured by computed tomography (CT) in 108 older men and postmenopausal women (mean ± s.d.; 69 ± 7 years). Additionally, trunk and leg fat mass (FM) were measured by dual‐energy X‐ray absorptiometry (DXA). Markers of insulin resistance and dyslipidemia were determined from oral glucose tolerance tests and lipid and lipoprotein measurements, respectively. Outcomes were fasted and postchallenge (area under the curve, AUC) insulin (INS_AUC) and glucose (GLU_AUC), product of the insulin and glucose AUC (INS_AUC × GLU_AUC), triglycerides (TG), and high‐density lipoprotein (HDL)‐cholesterol. Consistent with our previous findings in postmenopausal women, adjusting for DXA trunk FM revealed a favorable association of DXA leg FM with the metabolic risk outcomes in both older men and postmenopausal women. Likewise, adjusting for CT abdominal visceral fat generally revealed a favorable association of CT thigh fat with metabolic risk outcomes in women, but not men. The discordance between the DXA and CT results in men is unclear but may be due to sex differences in visceral fat accrual. The mechanisms underlying the protective effect of thigh fat on metabolic risk factors need to be elucidated.