Xanthan gum production under several operational conditions: molecular structure and rheological properties*

Xanthan gum production under several operational conditions has been studied. Temperature, initial nitrogen concentration and oxygen mass transfer rate have been changed and average molecular weight, pyruvilation and acetylation degree of xanthan produced have been measured in order to know the influence of these variables on the synthesised xanthan molecular structure. Also, xanthan gum solution viscosity has been measured, and rheological properties of the solutions have been related to molecular structure and operational conditions. The Casson model has been employed to describe the rheological behaviour. The parameter values of the Casson model, tau(0) and K(c), have been obtained for each polysaccharide synthesised under different operational conditions. Both pyruvilation and acetylation degrees and average molecular weight of xanthan increase with fermentation time at any operating conditions. Xanthan molecules with the highest average molecular weight have been obtained at 25 degrees C. Nevertheless, at this temperature acetate and pyruvate radical concentration are lowest. Nitrogen concentration in broth does not show any clear influence over xanthan average molecular weight, although with high nitrogen source concentration xanthan with low pyruvilation degree is produced.     

Bone remodelling analysis of a bovine femur for a veterinary implant design

The response of bovine bone to the presence of an implant is analysed with the aim of simulating bone remodelling in a developing model of a polymeric intramedullary interlocking nail for veterinary use. A 3-D finite element model of the femur diaphysis is built based on computed tomography images and using a CAD-based modelling pipeline. The bone remodelling process after the surgery is analysed and compared with the healthy bone. The remodelling law assumes that bone adapts to the mechanical environment. For the analyses a consistent set of loads is determined for the bovine walk cycle. The remodelling results reproduce the morphologic features of bone and provide evidence of the difference on the bone behaviour when comparing metallic and polymeric nails. Our findings indicate that an intramedullary polymeric nail has the advantage over the metallic one of improving long-term bone healing and possibly avoiding the need of the implant removal.     

Effectiveness of bats as pollinators of Stenocereus stellatus (Cactaceae) in wild, managed in situ, and cultivated populations in La Mixteca Baja, central Mexico

Stenocereus stellatus is an endemic, self-incompatible, columnar cactus found in central Mexico where many of its wild populations have been fragmented. As an economically important species of fruit-producing cactus, S. stellatus occurs in wild, managed in situ, and cultivated populations. The objectives of this study were to determine the effective pollinators of S. stellatus, to compare pollinator visits and reproductive parameters among the three types of populations, and to determine if nectar feeding-bats are moving among populations. Effective pollinators were the nectarivorous bats Choeronycteris mexicana, Leptonycteris curasoae, and L. nivalis. Fewer total visits per flower per night and fewer visits by Choeronycteris were observed in cultivated populations, while the opposite pattern was observed for Leptonycteris. One aggressive interaction was filmed in which Choeronycteris was physically displaced by Leptonycteris, and Choeronycteris visits were significantly affected by Leptonycteris visits. Cultivated populations received more pollen grains and had more fruit set. Variation in pollinator visits between different populations and the consequent effects on reproductive success were likely a result of competition between bat species, and differences in foraging and in sensitivity of bat species to human populations. Three marked L. curasoae traveled 15 km from their roosting site to their foraging area, and one visited cultivated and managed populations, suggesting that this species may be particularly important in moving pollen among populations.     

Identification and characterization of 17 microsatellite primers for the tick,Ixodes ricinus,using enriched genomic libraries

Ixodes ricinus is the main vector for important infectious diseases in both humans and in animals. Microsatellite loci were isolated from a dinucleotide‐enriched library made from I. ricinus sampled in Norway. Seventeen polymorphic microsatellites were further characterized among 24 individuals sampled from an island in the Oslofjord region. The number of observed alleles ranged from two to 17 and the observed heterozygosities between 0.10 and 0.83. Analysis of family materials gives evidence of non‐Mendelian inheritance of several of the characterized loci, among which most could be explained by presence of null alleles.     

Impacts on Coralligenous Outcrop Biodiversity of a Dramatic Coastal Storm

Extreme events are rare, stochastic perturbations that can cause abrupt and dramatic ecological change within a short period of time relative to the lifespan of organisms. Studies over time provide exceptional opportunities to detect the effects of extreme climatic events and to measure their impacts by quantifying rates of change at population and community levels. In this study, we show how an extreme storm event affected the dynamics of benthic coralligenous outcrops in the NW Mediterranean Sea using data acquired before (2006–2008) and after the impact (2009–2010) at four different sites. Storms of comparable severity have been documented to occur occasionally within periods of 50 years in the Mediterranean Sea. We assessed the effects derived from the storm comparing changes in benthic community composition at sites exposed to and sheltered from this extreme event. The sites analyzed showed different damage from severe to negligible. The most exposed and impacted site experienced a major shift immediately after the storm, represented by changes in the species richness and beta diversity of benthic species. This site also showed higher compositional variability immediately after the storm and over the following year. The loss of cover of benthic species resulted between 22% and 58%. The damage across these species (e.g. calcareous algae, sponges, anthozoans, bryozoans, tunicates) was uneven, and those with fragile forms were the most impacted, showing cover losses up to 50 to 100%. Interestingly, small patches survived after the storm and began to grow slightly during the following year. In contrast, sheltered sites showed no significant changes in all the studied parameters, indicating no variations due to the storm. This study provides new insights into the responses to large and rare extreme events of Mediterranean communities with low dynamics and long-lived species, which are among the most threatened by the effects of global change.     

Enhanced biological phosphorus removal in a sequencing batch reactor using propionate as the sole carbon source

An enhanced biological phosphorus removal (EBPR) system was developed in a sequencing batch reactor (SBR) using propionate as the sole carbon source. The microbial community was followed using fluorescence in situ hybridization (FISH) techniques and Candidatus 'Accumulibacter phosphatis' were quantified from the start up of the reactor until steady state. A series of SBR cycle studies was performed when 55% of the SBR biomass was Accumulibacter, a confirmed polyphosphate accumulating organism (PAO) and when Candidatus 'Competibacter phosphatis', a confirmed glycogen-accumulating organism (GAO), was essentially undetectable. These experiments evaluated two different carbon sources (propionate and acetate), and in every case, two different P-release rates were detected. The highest rate took place while there was volatile fatty acid (VFA) in the mixed liquor, and after the VFA was depleted a second P-release rate was observed. This second rate was very similar to the one detected in experiments performed without added VFA.A kinetic and stoichiometric model developed as a modification of Activated Sludge Model 2 (ASM2) including glycogen economy, was fitted to the experimental profiles. The validation and calibration of this model was carried out with the cycle study experiments performed using both VFAs. The effect of pH from 6.5 to 8.0 on anaerobic P-release and VFA-uptake and aerobic P-uptake was also studied using propionate. The optimal overall working pH was around 7.5. This is the first study of the microbial community involved in EBPR developed with propionate as a sole carbon source along with detailed process performance investigations of the propionate-utilizing PAOs.     

Disturbance from pond management obscures local and regional drivers of assemblages of primary producers

相似文献   

Xanthan gum: production, recovery, and properties

Xanthan gum is a microbial polysaccharide of great commercial significance. This review focuses on various aspects of xanthan production, including the producing organism Xanthomonas campestris, the kinetics of growth and production, the downstream recovery of the polysaccharide, and the solution properties of xanthan.     

Crystalline structure of poly(hexamethylene adipate). Study on the morphology and the enzymatic degradation of single crystals

The crystalline structure of polyester 6 6 was studied by means of X-ray and electron diffraction and real-space electron microscopy. An orthorhombic unit cell containing eight chain segments with a quasi planar zigzag conformation was derived. The chain axis projection could be defined by a small rectangular cell containing only two molecular segments. Simulation of electron diffraction patterns indicates that molecular segments were arranged with azimuthal angles close to +/-46 degrees . X-ray diffraction patterns suggested that the large dimensions of the unit cell were a consequence of a slight shift between neighboring chains that improved the electrostatic interactions. Chain-folded lamellar crystals were obtained by isothermal crystallization of dilute n-hexanol or n-octanol solutions. The crystalline habit was studied, and the influence of temperature was evaluated. A regular folding surface was observed by using polyethylene decoration techniques. Lamellar crystals were easily degraded with different lipases. A preferential enzymatic attack was, in some cases, observed to occur in the crystal edges, giving rise to highly irregular borders with a fringed texture.     

Na‐Ion Batteries for Large Scale Applications: A Review on Anode Materials and Solid Electrolyte Interphase Formation

The urgent need for optimizing the available energy through smart grids and efficient large‐scale energy storage systems is pushing the construction and deployment of Li‐ion batteries in the MW range which, in the long term, are expected to hit the GW dimension while demanding over 1000 ton of positive active material per system. This amount of Li‐based material is equivalent to almost 1% of current Li consumption and can strongly influence the evolution of the lithium supply and cost. Given this uncertainty, it becomes mandatory to develop an energy storage technology that depends on almost infinite and widespread resources: Na‐ion batteries are the best technology for large‐scale applications. With small working cells in the market that cannot compete in cost ($/W h) with commercial Li‐ion batteries, the consolidation of Na‐ion batteries mainly depends on increasing their energy density and stability, the negative electrodes being at the heart of these two requirements. Promising Na‐based negative electrodes for large‐scale battery applications are reviewed, along with the study of the solid electrolyte interphase formed in the anode surface, which is at the origin of most of the stability problems.