Root canal procedure for disarming nonhuman primates.

Nonhuman primates were disarmed by shortening their canine teeth. These teeth were cut off near the gingival level, the entire pulpal tissue removed and the canal filled with a formulated paste which was radiopaque, adhesive and germicidal. The teeth were sealed with a commercial alloy. This endodontic procedure was a quick, practical one-step method for permanently disarming nonhuman primates.     

Ein neuer Palaeodictyopteren-Fund aus dem westdeutschen Namurium

From the Namurian B of the Bergisches Land the oldest known remain of the Dictyoneuridae is described, namedSchmidtopteron adictyon n. g., n. sp. Present is a wing with the following characteristics: 1. shape long and slender; 2. subcosta relativly short; 3. radius nearly as long as the wing; 4. radius-sector branched off from the radius at 1/5 of the length of the wing (prox.), subdivided into 4 branches; 5. medialis subdivided also at 1/5 of the length of the wing; MEp with 2 branches; 6. cubitus subdivided at 1/10 of the length of the wing, CUp undivided; 7. anal veins 4 in number, separated each from the others in full length; at least A1 und A2 bifurcated; 8. A1 and CUp joined by a short connecting vein; 9. archaeodictyon not present. Schmidtopteron adictyon is the most primitive Namurian wing known. Its systematic position results from the structure of the only little branched veins. The absence of the archaeodictyon may be attributed to preservation: only the external mould of the upper surface of the wing is preserved. From all other genera of the Dictyoneuridae,Schmidtopteron is separated by the connection between A1 and CUp. This feature, and the relative large anal area, show thatSchmidtopteron is not the ancestor of younger Dictyoneuridae, but an early side branch of the evolution of this family.     

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) in soil inoculated with Pseudomonas cepacia DBO1(pRO101), Alcaligenes eutrophus AEO106(pRO101) and Alcaligenes eutrophus JMP134(pJP4): effects of inoculation level and substrate concentration

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) by two Alcaligenes eutrophus strains and one Pseudomonas cepacia strain containing the 2,4-D degrading plasmids pJP4 or pRO101 (=pJP4::Tn1721) was tested in 50 g (wet wt) samples of non-sterile soil. Mineralization was measured as ¹⁴C-CO₂evolved during degradation of uniformly-ring-labelled ¹⁴C-2,4-D. When the strains were inoculated to a level of approximately 10⁸ CFU/g soil, between 20 and 45% of the added 2,4-D (0.05 ppm, 10 ppm or 500 ppm) was mineralized within 72 h. Mineralization of 0.05 ppm and 10 ppm, 2,4-D by the two A. eutrophus strains was identical and rapid whereas mineralization by P. cepacia DBO1(pRO101) occurred more slowly. In contrast, mineralization of 500 ppm 2,4-D by the two A. eutrophus strains was very slow whereas mineralization by P. cepacia DBO1 was more rapid. Comparison of 2,4-D mineralization at different levels of inoculation with P. cepacia DBO1(pRO101) (6×10⁴, 6×10⁶ and 1×10⁸ CFU/g soil) revealed that the maximum mineralization rate was reached earlier with the high inoculation levels than with the low level. The kinetics of mineralization were evaluated by nonlinear regression analysis using five different models. The linear or the logarithmic form of a three-half-order model were found to be the most appropriate models for describing 2,4-D mineralization in soil. In the cases in which the logarithmic form of the three-half-order model was the most appropriate model we found, in accordance with the assumptions of the model, a significant growth of the inoculated strains.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - CFU colony forming units - PTYG peptone, tryptone, yeast & glucose - DPM disintegrations per minute     

Process‐based functions for seed retention on animals: a test of improved descriptions of dispersal using multiple data sets

Studies of external seed transport on animals usually assume that the probability of detachment is constant, so that seed retention should show a simple exponential relationship with time. This assumption has not been tested explicitly, and may lead to inaccurate representation of long distance seed dispersal by animals. We test the assumption by comparing the fit to empirical data of simple, two‐parameter functions. Fifty‐two data sets were obtained from five published studies, describing seed retention of 32 plant species on sheep, cattle, deer, goats and mice. Model selection suggested a simple exponential function was adequate for data sets in which seed retention was followed for short periods ( <48 h). The data gathered over longer periods (49–219 days) were best described by the power exponential function, a form of the stretched exponential which allows a changing dropping rate. In these cases the power exponential showed that seed dropping rate decreased with time, suggesting that seeds vary in attachment, with some seeds becoming deeply buried or wound up in the animal's coat. Comparison of fitted parameters across all the data sets also confirmed that seeds with adhesive structures have lower dropping rates than those without. We conclude that the seed dropping rate often changes with time during external transport on animals and that the power exponential is an effective function to describe this change. We advise that, to analyse seed dropping rates adequately, retention should be measured over reasonable time periods – until most seeds are dropped – and both the simple and power exponential functions should be fitted to the resulting data. To increase its utility, we provide functions describing the seed dropping rate and the dispersal kernel resulting from the power exponential relationship.     

Fusing VE-Cadherin to α-Catenin Impairs Fetal Liver Hematopoiesis and Lymph but Not Blood Vessel Formation

We have recently shown that genetic replacement of VE-cadherin by a VE-cadherin–α-catenin fusion construct strongly impairs opening of endothelial cell contacts during leukocyte extravasation and induction of vascular permeability in adult mice. Here we show that this mutation leads to lethality at midgestation on a clean C57BL/6 background. Investigating the reasons for embryonic lethality, we observed a lack of fetal liver hematopoiesis and severe lymphedema but no detectable defects in blood vessel formation and remodeling. As for the hematopoiesis defect, VE-cadherin–α-catenin affected neither the generation of hematopoietic stem and progenitor cells (HSPCs) from hemogenic endothelium nor their differentiation into multiple hematopoietic lineages. Instead, HSPCs accumulated in the fetal circulation, suggesting that their entry into the fetal liver was blocked. Edema formation was caused by disturbed lymphatic vessel development. Lymphatic progenitor cells of VE-cadherin–α-catenin-expressing embryos were able to leave the cardinal vein and migrate to the site of the first lymphatic vessel formation, yet subsequently, these cells failed to form large lumenized lymphatic vessels. Thus, stabilizing endothelial cell contacts by a covalent link between VE-cadherin and α-catenin affects recruitment of hematopoietic progenitors into the fetal liver and the development of lymph but not blood vessels.     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.