The complexity of cardiolipin in health and disease

Cardiolipin, the signature phospholipid of mitochondria, is a lipid dimer that is important for a diverse range of mitochondrial activities beyond the process of ATP production. Thus not surprisingly, derangements in cardiolipin metabolism are now appreciated to contribute to an assortment of pathological conditions. A comprehensive inventory of enzymes involved in cardiolipin biosynthesis and remodeling was just recently obtained. Post-biosynthesis, the acyl chain composition of cardiolipin is modified by up to three distinct remodeling enzymes that produce either a homogeneous tissue-specific mature form of cardiolipin or alternatively 'bad' cardiolipin that has been linked to mitochondrial dysfunction. In this review, we initially focus on the newly identified players in cardiolipin metabolism and then shift our attention to how changes in cardiolipin metabolism contribute to human disease.     

Phototropins but not cryptochromes mediate the blue light-specific promotion of stomatal conductance, while both enhance photosynthesis and transpiration under full sunlight

Leaf epidermal peels of Arabidopsis (Arabidopsis thaliana) mutants lacking either phototropins 1 and 2 (phot1 and phot2) or cryptochromes 1 and 2 (cry1 and cry2) exposed to a background of red light show severely impaired stomatal opening responses to blue light. Since phot and cry are UV-A/blue light photoreceptors, they may be involved in the perception of the blue light-specific signal that induces the aperture of the stomatal pores. In leaf epidermal peels, the blue light-specific effect saturates at low irradiances; therefore, it is considered to operate mainly under the low irradiance of dawn, dusk, or deep canopies. Conversely, we show that both phot1 phot2 and cry1 cry2 have reduced stomatal conductance, transpiration, and photosynthesis, particularly under the high irradiance of full sunlight at midday. These mutants show compromised responses of stomatal conductance to irradiance. However, the effects of phot and cry on photosynthesis were largely nonstomatic. While the stomatal conductance phenotype of phot1 phot2 was blue light specific, cry1 cry2 showed reduced stomatal conductance not only in response to blue light, but also in response to red light. The levels of abscisic acid were elevated in cry1 cry2. We conclude that considering their effects at high irradiances cry and phot are critical for the control of transpiration and photosynthesis rates in the field. The effects of cry on stomatal conductance are largely indirect and involve the control of abscisic acid levels.     

How cellulose-based leaf toughness and lamina density contribute to long leaf lifespans of shade-tolerant species

Cell wall fibre and lamina density may interactively affect leaf toughness and leaf lifespan. Here, we tested this with seedlings of 24 neotropical tree species differing in shade tolerance and leaf lifespan under standardized field conditions (140-867 d in gaps; longer in shade). We quantified toughness with a cutting test, explicitly seeking a mechanistic linkage to fibre. Lamina density, but not fracture toughness, exhibited a plastic response to gaps vs shade, while neither trait was affected by leaf age. Toughness corrected for lamina density, a recently recognized indicator of material strength per unit mass, was linearly correlated with cellulose content per unit dry mass. Leaf lifespan was positively correlated with cellulose and toughness in shade-tolerant species but only weakly in gap-dependent species. Leaf lifespan was uncorrelated with lamina thickness, phenolics and tannin concentrations. In path analysis including all species, leaf lifespan was directly enhanced by density and toughness, and indirectly by cellulose via its effect on toughness. Different suites of leaf traits were correlated with early seedling survival in gaps vs shade. In conclusion, cellulose and lamina density jointly enhance leaf fracture toughness, and these carbon-based physical traits, rather than phenolic-based defence, explain species differences in herbivory, leaf lifespan and shade survival.     

Evaluation of aflatoxin B1 and ochratoxin A in interacting mixed cultures of Aspergillus sections Flavi and Nigri on peanut grains

The influence of inoculum size on the colony-forming units, production of aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) was determined when Aspergillus flavus and A. niger aggregate strains were cultured alone and in pairs on irradiated peanut grains at 28°C and 0.97 water activity (a_W). The results showed a marked influence of inoculum factor on fungal counts, AFB₁ and OTA production in single and paired cultures. Fungal counts of the A. niger aggregate strain in interacting cultures at 7, 14 and 21?days of incubation were significantly higher than those observed in the A. flavus strain, except in the mixed culture with 10² spores/ml of both strains. In all mixed culture assays, the AFB₁ production was significantly reduced in comparison with the accumulation of mycotoxin in single cultures. A total inhibition in AFB₁ production was observed in some interactions as 10² spores/ml of A. flavus and 10³ spores/ml of A. niger aggregate strain at 7 and 14?days, among others. With regard to OTA production, a stimulation in the interacting cultures was observed at all inoculum sizes and incubation period. The highest levels of OTA accumulation were observed at 14?days for all interacting cultures. The maximum level was reach in the culture 10³ spores/ml of A. niger aggregate and 10⁴ spores/ml of A. flavus (p?<?0.001). These results suggest that, under optimal environmental conditions in peanut grains, the interaction between A. flavus and A. niger aggregate strains could result in an inhibition of AFB₁ and in a stimulation of OTA production.     

Modelling the economic and environmental performance of engineering products: a materials selection case study

Purpose

Life cycle assessment (LCA) studies allow understanding all relevant processes and environmental impacts involved in the life cycle of products. However, in order to fully assess their sustainability, these studies should be complemented by economic (LCC) and societal analyses. In this context, the present work aims at assessing all costs (internal and external) and the environmental performance associated to the full life cycle of specific engineering products. These products are lighting columns for roadway illumination made with three different materials: a glass fibre reinforced polymer composite, steel and aluminium.

Methods

The LCA/LCC integrated methodology used was based in a ??cradle-to-grave?? assessment which considers the raw materials production, manufacture, on-site installation, use and maintenance, dismantlement and end-of-life (EoL) of the lighting columns. The fossil fuels environmental impact category was selected as the key environmental impact indicator to perform the integrated environmental and cost analysis.

Results

The potential total costs obtained for the full life cycle of the lighting columns demonstrated that the one made in steel performs globally worse than those made in composite or aluminium. Although the three systems present very similar internal costs, the steel column has higher external costs in the use phase that contribute for its higher total cost. This column has very high costs associated to safety features, since it constitutes a significant risk to the life of individuals. The raw material and column production stages are the main contributors for the total internal life cycle costs. The EoL treatment is a revenue source in all systems because it generates energy (in the case of the composite incineration) or materials (in the case of metal recycling). The composite and aluminium lighting columns present similar ??cradle-to-grave?? life cycle total cost. However, until the dismantlement phase, the aluminium column presents the highest environmental impact, whereas in the EoL treatment phase this scenario is reversed. The ??cradle-to-grave?? life cycle potential total cost and the environmental impact (fossil fuels) indicator of the steel lighting column are higher than those of the other columns.

Conclusions

Even though the uncertainties in the LCC are larger if external costs are included, their consideration when modelling the economic performance of engineering products increases the probability of developing a more sustainable solution from a societal perspective.     

The Expansion of mtDNA Haplogroup L3 within and out of Africa

Although fossil remains show that anatomically modern humans dispersed out of Africa into the Near East ～100 to 130 ka, genetic evidence from extant populations has suggested that non-Africans descend primarily from a single successful later migration. Within the human mitochondrial DNA (mtDNA) tree, haplogroup L3 encompasses not only many sub-Saharan Africans but also all ancient non-African lineages, and its age therefore provides an upper bound for the dispersal out of Africa. An analysis of 369 complete African L3 sequences places this maximum at ～70 ka, virtually ruling out a successful exit before 74 ka, the date of the Toba volcanic supereruption in Sumatra. The similarity of the age of L3 to its two non-African daughter haplogroups, M and N, suggests that the same process was likely responsible for both the L3 expansion in Eastern Africa and the dispersal of a small group of modern humans out of Africa to settle the rest of the world. The timing of the expansion of L3 suggests a link to improved climatic conditions after ～70 ka in Eastern and Central Africa rather than to symbolically mediated behavior, which evidently arose considerably earlier. The L3 mtDNA pool within Africa suggests a migration from Eastern Africa to Central Africa ～60 to 35 ka and major migrations in the immediate postglacial again linked to climate. The largest population size increase seen in the L3 data is 3-4 ka in Central Africa, corresponding to Bantu expansions, leading diverse L3 lineages to spread into Eastern and Southern Africa in the last 3-2 ka.     

Mitochondrial mislocalization and altered assembly of a cluster of Barth syndrome mutant tafazzins

None of the 28 identified point mutations in tafazzin (Taz1p), which is the mutant gene product associated with Barth syndrome (BTHS), has a biochemical explanation. In this study, endogenous Taz1p was localized to mitochondria in association with both the inner and outer mitochondrial membranes facing the intermembrane space (IMS). Unexpectedly, Taz1p does not contain transmembrane (TM) segments. Instead, Taz1p membrane association involves a segment that integrates into, but not through, the membrane bilayer. Residues 215-232, which were predicted to be a TM domain, were identified as the interfacial membrane anchor by modeling four distinct BTHS mutations that occur at conserved residues within this segment. Each Taz1p mutant exhibits altered membrane association and is nonfunctional. However, the basis for Taz1p dysfunction falls into the following two categories: (1) mistargeting to the mitochondrial matrix or (2) correct localization associated with aberrant complex assembly. Thus, BTHS can be caused by mutations that alter Taz1p sorting and assembly within the mitochondrion, indicating that the lipid target of Taz1p is resident to IMS-facing leaflets.     

Cerebrospinal fluid tau, A beta, and phosphorylated tau protein for the diagnosis of Alzheimer's disease

The diagnosis of AD is still largely based on exclusion criteria of secondary causes and other forms of dementia with similar clinical pictures, than the diagnostic accuracy of AD is low. Improved methods of early diagnosis are needed, particularly because drugs treatment is more effective in the early stages of the disease. Recent research focused the attention to biochemical diagnostic markers (biomarkers) and according to the proposal of a consensus group on biomarkers, three candidate CSF markers reflecting the pathological AD processes, have recently been identified: total tau protein (t-tau), amyloid beta(1-42) protein (A beta42), and tau protein phosphorylated at AD-specific epitopes (p-tau). Several articles report reduced CSF levels of A beta42 and increased CSF levels of t-tau and p-tau in AD; the sensitivity and specificity of these data are able for discrimination of AD patients from controls. However, the specificity for other dementias is low. According to the literature analysis reported in the present review, we can conclude that the combination of the CSF markers and their ratios may significantly increase the specificity and the accuracy of AD diagnosis.