Effects of low temperature on growth and non-structural carbohydrates of the imperial bromeliad <Emphasis Type="Italic">Alcantarea imperialis</Emphasis> cultured in vitro

The imperial bromeliad Alcantarea imperialis grows naturally on rocky outcrops (‘inselbergs’) in regions where daily temperatures vary from 5 to 40°C. As carbohydrate metabolism is altered in response to cold, it could lead to reprogramming of the metabolic machinery including the increase in levels of metabolites that function as osmolytes, compatible solutes, or energy sources in order to maintain plant homeostasis. The aim of this study was to evaluate the effects of different temperatures on plant growth and non-structural carbohydrates in plants of A. imperialis adapted to low temperature. Seedlings of A. imperialis were grown in vitro under a 12-h photoperiod with four different day/night temperature cycles: 5/5°C, 15/15°C, 15/30°C (dark/light) and 30/30°C. Plants were also cultivated at 26°C in ex vitro conditions for comparison. The results showed an inverse relationship between temperature and germination time and no differences in the percentage of germination. Plants maintained for 9 months at 15°C presented a reduced number of leaves and roots, and a dry mass four times lower than plants grown at 30°C. Sugar content was higher in plants grown at 15°C than at 30°C. However, the highest amount of total sugar was found in plants growing under warm day/cold night conditions. Myo-inositol, glucose, fructose and sucrose were found predominantly under high temperatures, while under low temperatures, sucrose was apparently replaced by trehalose, raffinose and stachyose. Starch content was highest in plants grown under high temperatures. The lowest starch content was detected under low temperatures, suggesting its conversion into soluble carbohydrates to protect the plants against cold. These results indicated that low temperature retarded growth of A. imperialis and increased sugar levels, mainly trehalose, thus suggesting that these sugar compounds could be involved in cold tolerance.     

Novel genetic polymorphisms that further delineate the phylogeny of the Mycobacterium tuberculosis complex

In a previous report, we described a PCR protocol for the differentiation of the various species of the Mycobacterium tuberculosis complex (MTC) on the basis of genomic deletions (R. C. Huard, L. C. de Oliveira Lazzarini, W. R. Butler, D. van Soolingen, and J. L. Ho, J. Clin. Microbiol. 41:1637-1650, 2003). That report also provided a broad cross-comparison of several previously identified, phylogenetically relevant, long-sequence and single-nucleotide polymorphisms (LSPs and SNPs, respectively). In the present companion report, we expand upon the previous work (i) by continuing the evaluation of known MTC phylogenetic markers in a larger collection of tubercle bacilli (n = 125), (ii) by evaluating additional recently reported MTC species-specific and interspecific polymorphisms, and (iii) by describing the identification and distribution of a number of novel LSPs and SNPs. Notably, new genomic deletions were found in various Mycobacterium tuberculosis strains, new species-specific SNPs were identified for "Mycobacterium canettii," Mycobacterium microti, and Mycobacterium pinnipedii, and, for the first time, intraspecific single-nucleotide DNA differences were discovered for the dassie bacillus, the oryx bacillus, and the two Mycobacterium africanum subtype I variants. Surprisingly, coincident polymorphisms linked one M. africanum subtype I genotype with the dassie bacillus and M. microti with M. pinnipedii, thereby suggesting closer evolutionary ties within each pair of species than had been previously thought. Overall, the presented data add to the genetic definitions of several MTC organisms as well as fine-tune current models for the evolutionary history of the MTC.     

Structural analysis of an Echinococcus granulosus actin-fragmenting protein by small-angle x-ray scattering studies and molecular modeling

The Echinococcus granulosus actin filament-fragmenting protein (EgAFFP) is a three domain member of the gelsolin family of proteins, which is antigenic to human hosts. These proteins, formed by three or six conserved domains, are involved in the dynamic rearrangements of the cytoskeleton, being responsible for severing and capping actin filaments and promoting nucleation of actin monomers. Various structures of six domain gelsolin-related proteins have been investigated, but little information on the structure of three domain members is available. In this work, the solution structure of the three domain EgAFFP has been investigated through small-angle x-ray scattering (SAXS) studies. EgAFFP exhibits an elongated molecular shape. The radius of gyration and the maximum dimension obtained by SAXS were, respectively, 2.52 +/- 0.01 nm and 8.00 +/- 1.00 nm, both in the absence and presence of Ca2+. Two different molecular homology models were built for EgAFFP, but only one was validated through SAXS studies. The predicted structure for EgAFFP consists of three repeats of a central beta-sheet sandwiched between one short and one long alpha-helix. Possible implications of the structure of EgAFFP upon actin binding are discussed.     

Potential new areas for conservation of key botanical families in the subtropical Atlantic Forest

Myrtaceae, Lauraceae and Fabaceae are regarded as essential floristic elements of Atlantic forests due to their outstanding species richness, endemism levels, and ecological functions. Nonetheless, Atlantic forests are being subjected to multiple human disturbances that compromise the conservation of their flora. This study, therefore, intended to address whether there exist potential areas for conservation with great richness of tree/shrub species of the aforementioned families in different forest types within the subtropical Atlantic Forest. For this, data collected systematically across?~?23% of the subtropical Brazilian Atlantic Forest were employed. The univariate Local Moran I statistic was used to search for clusters of sample plots with great richness of species of the studied families. Six clusters were found throughout the evergreen rainforest (ERF) and Araucaria forest (AF), and most of them contained more than half of all species of these families observed on the sample plots, besides many others belonging to different families. A cluster of Myrtaceae and a cluster of Lauraceae in the ERF were the only ones that overlapped protected areas. The clusters of Lauraceae in the AF, located in ecotone zones with the ERF, had?~?50% of native forest cover, whereas the clusters of Myrtaceae and Fabaceae had?~?10% of forest cover. Inasmuch as forests in the study area have been heavily exploited, the clusters have relevant conservation value. Protected areas could be expanded or converted into more restrictive conservation categories to enhance the conservation of populations of key elements of the Atlantic Forest. Yet, non-protected areas deserve attention regarding the management of forest resources and conservation-by-use strategies.

     

Endocytosis of the non-catalytic ADAM23: Recycling and long half-life properties

A Disintegrin And Metalloprotease 23 (ADAM23) is a member of the ADAMs family of transmembrane proteins, mostly expressed in nervous system, and involved in traffic and stabilization of Kv1-potassium channels, synaptic transmission, neurite outgrowth, neuronal morphology and cell adhesion. Also, ADAM23 has been linked to human pathological conditions, such as epilepsy, cancer metastasis and cardiomyopathy. ADAM23 functionality depends on the molecule presence at the cell surface and along the secretory pathway, as expected for a cell surface receptor. Because endocytosis is an important functional regulatory mechanism of plasma membrane receptors and no information is available about the traffic or turnover of non-catalytic ADAMs, we investigated ADAM23 internalization, recycling and half-life properties. Here, we show that ADAM23 undergoes constitutive internalization from the plasma membrane, a process that depends on lipid raft integrity, and is redistributed to intracellular vesicles, especially early and recycling endosomes. Furthermore, we observed that ADAM23 is recycled from intracellular compartments back to the plasma membrane and thus has longer half-life and higher cell surface stability compared with other ADAMs. Our findings suggest that regulation of ADAM23 endocytosis/stability could be exploited therapeutically in diseases in which ADAM23 is directly involved, such as epilepsy, cancer progression and cardiac hypertrophy.     

Detection of Mycobacterium leprae DNA in clinical and environmental samples using serological analysis and PCR

Molecular Biology Reports - Leprosy is a chronic infectious disease caused by Mycobacterium leprae and persists as a serious public health problem in Brazil. This microorganism is inculturable,...     

Inflorescence-specific genes from Arabidopsis thaliana encoding glycine-rich proteins

Genomic and cDNA clones for three inflorescence-specific genes from Arabidopsis thaliana were isolated and characterized. The genes are tandemly organized in the genome on a 10 kb fragment. The expression of these genes is coordinately regulated in a developmental and organ-specific pattern. They are expressed predominantly in anthers at the later stage of flower development. The primary structure of the encoded gene products exhibits comparable features consisting of a hydrophobic domain at the N-terminal region followed by repeated glycine-rich motifs. Little homology is observed either between the glycine-rich domain of the three genes or with previously described glycine-rich proteins from other plant species.     

Pollination and Breeding System of Vellozia squamata (Liliales: Velloziaceae): A Species of the Brazilian Cerrados

The pollination biology and breeding system of Vellozia squamata (Velloziaceae), a species of cerrado vegetation in Central Brazil, were studied. V. squamata is unusual in being pollinated by a few, generalist bee species despite having very large flowers, and having a distinctive pulsed flowering phenology. The species is self-incompatible but with a late-acting, post-fertilization rejection mechanism.     

Effects of pasture implantation on the termite (Isoptera) fauna in the Central Brazilian Savanna (Cerrado)

The advance of agricultural frontier may cause the Cerrado (Brazilian savanna) to disappear before 2030. This work focuses on measuring the impact of pasture implantation on a cerrado’s termite fauna. Termites were sampled in a cerrado sensu stricto and a pasture, originally cerrado. All species were classified as their feeder group, accumulation curves were made and Shannon-Wiener indexes and β diversity were calculated for both areas. Cerrado was richer than pasture and species composition differed considerably, leading β diversity to a high value. The humivorous was the most representative species, followed by grass/litter feeders, xylophagous and, less representative, the intermediates. There were more xylophagous and intermediates species on cerrado than in pasture; the grass/litter feeders were more abundant in pasture, but didn’t differed in number or species; and humivorous didn’t differed neither in richness nor in abundance. This work shows that the simplification of the habitat is indeed causing the extinction of populations that depend on some specifics resource.     

Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material

Background: The fracture between acrylic denture base material and artificial teeth is a common clinical occurrence in dental prosthodontic practice. Objective: To evaluate the bond strength between acrylic resins and resin denture teeth when submitted by two protocols of monomer liquid application on the tooth surface and using different polymerisation methods. Material and methods: Microwave‐polymerised (Onda‐Cryl), heat‐polymerised (Clássico) and autopolymerising (Jet) acrylic resins and a brand of resin denture teeth (Biotone) were used. The acrylic resins were polymerised according to the cycles: (A) microwave – fast cycle, Onda‐Cryl; (B) microwave – long cycle, Onda‐Cryl; (C) microwave – manufacturer’s cycle, Onda‐Cryl; (T) water bath – long cycle, Clássico and (Q) bench polymerisation cycle, Jet. Thirty specimens were prepared for each polymerisation method; 10 were packed with acrylic resin after 60 s of monomer liquid application on the tooth surface, 10 after 180 s and 10 without any monomer liquid application. For the purpose of the study, a shear test was used. anova and Tukey tests were performed to identify significant differences (α = 0.05). Results: The highest bond strength values were found for monomer surface treatments, regardless of the polymerisation cycles. The highest significant values were found for cycles B (15.4 ± 1.8 MPa), C (11.9 ± 4.9 MPa) and T (15.4 ± 2.6 MPa) for non‐treated and 60 s methylmethacrylate treated groups. Comparing the monomer liquid treatment, they did not differ significantly (p > 0.05), except for cycle A (p < 0.05). Conclusion: Chemical treatment using monomer on the tooth surface prior to the acrylic resin packing improved the bond strength between resin denture tooth and acrylic resin, regardless of monomer liquid treatment protocols. The microwavable resin, polymerised by fast cycle and autopolymerising resin should be avoided for processing denture and denture repairs, respectively.