A highly sensitive chromogenic microtiter plate assay for plasminogen activators which quantitatively discriminates between the urokinase and tissue-type activators

A simple and highly sensitive chromogenic microtiter plate assay for plasminogen activators is described. The assay is based on plasmin cleavage of the synthetic tripeptide plasmin substrate H-D-norleucyl-hexahydrotyrosyl-lysine p-nitroaniline, which yields the yellow chromophore p-nitroanilide. Production of the latter compound is then quantitated spectrophotometrically at 405 nm on an ELISA plate reader. Linearity of the assay can be achieved over at least four orders of magnitude in a single experiment (0.01-100 milliPloug units) with appropriate incubation times. Capitalizing on tissue-type plasminogen activator's dependence on fibrin for enzymatic activity, the selective use of soluble fibrin products allows discrimination between urokinase and tissue-type activator. The utility of this aspect of the assay for the analysis of complex samples containing both types of plasminogen activators is demonstrated.     

Internal anion binding site and membrane potential dominate the regulation of proton pumping by the chromaffin granule ATPase

Effects of anions and membrane potential on the reconstituted proton pump from chromaffin granules were investigated. When acetate was present inside of the vesicles, ATP-dependent proton uptake was absolutely dependent on external chloride. Without external chloride, however, substantial proton uptake was observed when chloride or sulfate was present inside of the vesicles. Inside negative membrane potential drove ATP-dependent proton uptake regardless of the anion species present inside or outside of the vesicles. It is concluded that the internal anion binding site and membrane potential regulate the proton pumping activity of the ATPase.     

An antibody to the receptor for insulin-like growth factor I inhibits the growth of MCF-7 cells in tissue culture

Alpha IR-3, a monoclonal antibody to the insulin-like growth factor I receptor which blocks insulin-like growth factor I binding and inhibits its activity, inhibits the binding of 125I-insulin-like growth factor I to MCF-7 cells (an estrogen dependent human breast carcinoma cell line) with an IC-50 of approximately 100 ng/ml. It also inhibits the growth of MCF-7 cells cultured in 5% calf serum with approximately the same IC-50. Inhibition of growth occurs both when cells are cultured in the presence and absence of estrogen and is more pronounced when cells are grown at a low density. These findings demonstrate a requirement for insulin-like growth factor I for optimal growth of MCF-7 cells and suggest that it is an autocrine growth factor in these cells.     

Lipid metabolism in various regions of squid giant nerve fiber

The purpose of this investigation was to compare the incorporation of radioactivity from various precursors into lipids of different regions of squid giant nerve fiber systems including axoplasm, axon sheath, giant fiber lobes which contain stellate ganglion cell bodies, and the remaining ganglion including giant synapses. To identify the labeled lipids, stellate ganglia including giant fiber lobes and the remaining tissue were first incubated separately with [14C]glucose, [32P]phosphate, [14C]serine, [14C]acetate and [3H]myristate. The radioactivity from glucose, after conversion to glycerol and fatty acids, was incorporated into most lipids, including triacylglycerol, free fatty acids, cardiolipin, phosphatidylethanolamine, phosphatidylglycerol, phosphatidylcholine, phosphatidylinositol, phosphatidylserine, sphingomyelin and ceramide 2-aminoethylphosphanate [corrected]. The radioactivity from serine was largely incorporated into phosphatidylserine and, to a lesser extent, into other phospholipids, mainly as the base component. The sphingoid bases of ceramide and sphingomyelin were also significantly labeled. Saturated and monounsaturated and, to a lesser extent, polyunsaturated fatty acids of these lipids were synthesized from acetate, glucose and myristate. Among the major lipids, cholesterol was not labeled by any of the radioactive compounds used. Ganglion residues incorporated the most radioactivity in total lipids from either [14C]glucose or [14C]serine, followed by giant fiber lobes and then sheath. Axoplasm incorporated the least. Among various lipids, phosphatidylethanolamine with shorter saturated fatty acids and phosphatidylglycerol contained the most radioactivity from glucose in all regions. Axoplasm was characterized by a higher proportion of glucose radioactivity in ceramide, sphingomyelin and phosphatidylglycerol. Axoplasm and sheath contained a higher proportion of serine radioactivity than did the other two regions in ceramide. Essentially no radioactivity from [14C]galactose was incorporated in any region.     

The cholecystokinin-induced Ca2+ shuttle from the inositol trisphosphate-sensitive and ATP-dependent pool, and initial pepsinogen release connected with cytoskeleton of the chief cell

In guinea pig chief cells, inositol 1,4,5-trisphosphate (IP3) caused release of Ca2+, which was accumulated by ATP, from an endoplasmic reticulum-enriched fraction in both the permeable system and the cell-free system. This was mimicked with the Ca2+ ionophores A23187 and ionomycin on a large scale since an IP3-sensitive Ca2+ pool might be a subset of the Ca2+ ionophore-sensitive Ca2+ pool. The permeable chief cells, but not the cell-free system, retained the ability to react to synthetic cholecystokinin octapeptide (CCK-OP) with Ca2+ release from an IP3-sensitive pool due to of the non-additive but constant effect in exerting Ca2+ release from the store(s) induced by the combination with IP3 and CCK-OP. The increase in the cytosolic free Ca2+ concentration of intact chief cells responding to CCK-OP or the Ca2+ ionophore, ionomycin, comprised two components, namely, that by the Ca2+ entry from the extracellular space, and that by the Ca2+ release from the intracellular space(s) (as measured by fura-2). When CCK-OP or ionomycin was added, there was a biphasic response of pepsinogen secretion. An initial but transient response reaching a peak in 5 min was followed by a sustained response reaching a peak in 30 min. The initial pepsinogen release was independent of medium Ca2+, whereas the sustained one was dependent on medium Ca2+. The results suggest that the intracellular Ca2+ release from the store(s), presumably endoplasmic reticulum, may trigger the initial pepsinogen release, whereas the sustained pepsinogen secretion may be caused by acting in concert with the initial response and external Ca2+ entry. On the other hand, the disruption of the microtubular-microfilamentous system by colchicine or cytochalasin D failed to cause the Ca2+ release evoked by either IP3, CCK-OP or Ca2+ ionophores and to cause the CCK-OP- or ionomycin-induced initial pepsinogen release. These findings suggest that the IP3-sensitive pool is the same Ca2+ store which is completely or partially sensitive to CCK-OP and Ca2+ ionophores, respectively, and that the assembly of the cytoskeletal system is involved in initial intracellular Ca2+ metabolism and the following initial pepsinogen release. The assembly of the cytoskeletal system may be an early event in mediating the CCK-OP-induced initial pepsinogen release, perhaps by causing the Ca2+ release from an IP3-sensitive pool of the chief cell. The translocation or attachment of the IP3-sensitive pool brought about by cytoskeletal system might be necessary to cause Ca2+ release after the cell stimulation with CCK-OP.     

The dependence of glyceroglycolipid orientation and dynamics on head-group structure

The head-group orientations and molecular dynamics of three glyceroglycolipids in aqueous dispersions, as determined by 2H-NMR, are compared. 1,2-Di-O-tetradecyl-3-O-(alpha-D-glucopyranosyl)-sn-glycerol (alpha-DTGL) and 1,2-di-O-tetradecyl-3-O-(alpha-D-mannopyranosyl)-sn-glycerol (alpha-DTML), selectively 2H-labelled on the pyranose ring, at the exocyclic hydroxymethyl group, and at C3 of glycerol, have been studied by 2H-NMR and the results compared with those reported earlier for 1,2-di-O-tetradecyl-3-O-(beta-D-glucopyranosyl)-sn-glycerol (beta-DTGL). The alpha-glucolipid exhibits a gel-to-liquid crystal phase transition and a lamellar to hexagonal mesophase transition at temperatures which are similar to those of the beta-anomer, beta-DTGL. However, alpha-DTGL exhibits head group orientations and molecular ordering in the lamellar and hexagonal phases which differ strikingly with those reported for the corresponding beta-glucolipid. Whereas the head group of beta-DTGL is extended away from the bilayer surface into the aqueous phase, that of alpha-DTGL is almost parallel to the bilayer surface. alpha-DTGL exhibits a molecular order parameter of 0.56 which is substantially greater than that of its anomer, beta-DTGL, 0.45. The latter indicates that the head group region of the alpha-glyceroglucolipid is characterized by smaller angular fluctuations than that of beta-DTGL. On entering the hexagonal mesophase the pyranose ring of the beta-glucolipid undergoes a large reorientation relative to the motional axis of the head group, whereas the alpha-anomer exhibits only a small orientational change. 1,2-Di-O-tetradecyl-3-O-(alpha-D-mannopyranosyl)-sn-glycerol (alpha-DTML) undergoes a phase transition at 47 degrees C, attributed to the unusual lamellar gel to hexagonal phase transition. The pyranose ring of alpha-DTML, in a mixture with dimyristoylphosphatidylcholine (1:9 mol ratio) to give a lamellar liquid crystalline phase, is oriented away from the bilayer surface into the aqueous environment and has an Smol of 0.75. The results for alpha-DTML, 2H-labelled at the C3 position of glycerol, suggest that this segment also has high molecular ordering. alpha-DTML in a lamellar environment has the least flexible membrane surface of the glyceroglycolipids investigated to date. 2H-NMR spin lattice relaxation times have been used to probe the head group motions of the glycolipids. The results indicate that the rate of head group motion increases in the order alpha-DTML less than alpha-DTGL less than beta-DTGL.(ABSTRACT TRUNCATED AT 400 WORDS)     

A model for growth of Saccharomyces cerevisiae containing a recombinant plasmid in selective media

A major problem in the use of plasmids as recombinant vectors is the problem of plasmid-free cell generation from plasmid shedding and subsequent growth. A common technique for controlling the population of plasmidfree cells is the use of selective media against these cells using an auxotrophic host and a plasmid that has the ability to produced the essential metabolite. A distributed model describing the growth of Saccharomyces cerevisiae containing a recombinant plasmid in selective media was developed. The model allows for growth and production of a metabolite by the plasmid-carrying strain and growth of the plasmid-free cells on resulting metabolite concentrations. Through a determination of system constants and numerical solution to the equations, experimental batch and continuous culture results for cell concentration transients could be simulated by the model. The results indicated that despite selective pressure, plasmid-free cell growth was significant.     

Mathematical analysis of two-phase mass transfer in a batch reactor for the chemical transformation of a steroid

A reactor is described for the conversion of the slightly water-soluble steroid testosterone (T) to 4-androstene-3, 17-dione (4-AD) by enzyme in the presence of excess cofactor. Since the enzyme is subject to substrate inhibition, reaction rates are strong functions of aqueous substrate concentration. High concentrations of the substrate, testosterone, per unit reactor volume are maintained within poly(dimethylsiloxane) beads that are suspended in the aqueous enzyme solution. Mass transfer (controlled by bead size, polymer to water volume ratio, enzyme loading) is used to control the degree and rate of conversion. The reactor dynamics are predicted over a wide range of reaction conditions. The product steroid is recovered in the polymeric beads from the enzyme solution.