Characterization of photodamage to escherichia coli in optical traps

Optical tweezers (infrared laser-based optical traps) have emerged as a powerful tool in molecular and cell biology. However, their usefulness has been limited, particularly in vivo, by the potential for damage to specimens resulting from the trapping laser. Relatively little is known about the origin of this phenomenon. Here we employed a wavelength-tunable optical trap in which the microscope objective transmission was fully characterized throughout the near infrared, in conjunction with a sensitive, rotating bacterial cell assay. Single cells of Escherichia coli were tethered to a glass coverslip by means of a single flagellum: such cells rotate at rates proportional to their transmembrane proton potential (. J. Mol. Biol. 138:541-561). Monitoring the rotation rates of cells subjected to laser illumination permits a rapid and quantitative measure of their metabolic state. Employing this assay, we characterized photodamage throughout the near-infrared region favored for optical trapping (790-1064 nm). The action spectrum for photodamage exhibits minima at 830 and 970 nm, and maxima at 870 and 930 nm. Damage was reduced to background levels under anaerobic conditions, implicating oxygen in the photodamage pathway. The intensity dependence for photodamage was linear, supporting a single-photon process. These findings may help guide the selection of lasers and experimental protocols best suited for optical trapping work.     

Measurement of charge transfer during bacterial adhesion to an indium tin oxide surface in a parallel plate flow chamber.

An experimental method is described for the measurement of charge transfer during bacterial adhesion in situ to a transparent, semiconducting indium tin oxide (ITO) coated glass plate in a parallel plate flow chamber. Bacterial adhesion is measured simultaneously with either the electric potential or the capacitance of the surface. Initial bacterial adhesion was accompanied by a change in electric potential of the surface with no measurable change in capacitance. Consequently, it can be assumed that the change in electric potential of the surface is due to charge transfer between bacteria and the surface, and it can be calculated that, on average, a charge of about 10(-14) C per bacterium is exchanged during initial adhesion, which corresponds to only several percent of the total surface charge of a bacterium. Charge transfer could either be to or from the bacterial cell surface, dependent on the bacterial strain involved and the ionic strength used.     

Surface free energies of oral streptococci and their adhesion to solids

Abstract The adhesion of 3 strains of oral streptococci from a buffered suspension onto 3 different solid substrata was studied. Representative strains of streptococci were selected on the basis of their surface free energy ( γ _b), namely Streptococcus mitis L1 ( γ _b= 37 mJ·m⁻²), Streptococcus sanguis CH3 (95 mJ·m⁻²) and Streptococcus mutans NS (117 mJ·m⁻²). Solid substrata were also selected on basis of their surface free energy ( γ _s), and included polytetrafluorethylene ( γ _s= 20 mJ·m⁻²), polymethylmethacrylate (53 mJ·m⁻²) and glass (109 mJ·m⁻²). Bacterial adhesion was measured as the number of bacteria adhering per cm² at equilibrium. Equilibrium was usually obtained within 20 min. S. sanguis CH3, having an intermediate surface free energy did not show a clear preference for any of the 3 solids. S. mitis L1, however, the lowest surface free energy strain, adhered in highest numbers to the low energy solid PTFE, whereas the highest γ _b strain, S. mutans NS, adhered in highest numbers to the highest γ _s solid, glass. Calculation of the interfacial free energy of adhesion ( ΔF _adh) for each bacterial strain showed that this parameter was predictive of bacterial adhesion to solid substrata.     

On a relation between interfacial free energy-dependent and noninterfacial free energy-dependent adherence of oral streptococci to solid substrata

In several systems bacterial adhesion occurs despite a positive interfacial free energy of adhesion, F_adh; this implies that other interactions are involved. We hypothesize that the number of bacteria adhering at F_adh=0 represents their ability to adhere by other, i.e., non-F_adh-dependent interactions. Eight strains of oral streptococci were allowed to adhere to three solid substrata with different surface free energies in a flow cell system. Strain-specific linear relations were found between the numbers of bacteria adhering at saturation, n_b,s, and F_adh. When for all strains the numbers of adhering bacteria at F_adh=0 were plotted versus the slopes, denoting the sensitivity to F_adh, a linear relationship (r=0.92) was observed. It is, therefore, concluded that one strain-specific factor influences both F_adh-dependent and non-F_adh-dependent adherence. The numerical value of this factor, together with a surface energetic analysis, predicts the number of streptococci that will adhere to a given nonbiological substratum.     

Influence of glutaraldehyde fixation of cells adherent to solid substrata on their detachment during exposure to shear stress

In order to determine the response of fixed and nonfixed cells adherent to a solid substratum to shear stress, human fibroblasts were allowed to adhere and spread on either hydrophilic glass or hydrophobic Fluoroethylene-propylene (FEP-Teflon) and fixed with glutaraldehyde. Then, the cells were exposed to an incrementally loaded shear stress in a parallel plate flow chamber up to shear stresses of about 500 dynes/cm², followed by exposure to a liquid-air interface passage. The cellular detachment was compared with the one of nonfixed cells. In case of fixed cells, 50% of the adhering cells detached from FEP-Teflon at a shear stress of 350 dynes/cm², whereas 50% of the adhering, nonfixed cells detached already at a shear stress of 20 dynes/cm². No fixed cells detached from glass for shear stresses up to at least 500 dynes/cm². More than 50% of the nonfixed cells were detached from glass at a shear stress of 350 dynes/cm². Furthermore, the shape and morphology of fixed cells did not change during the incrementally loaded flow, in contrast to the ones of nonfixed cells, which clearly rounded up prior to detachment.     

Physicochemical characterization ofEscherichia coli

EightEscherichia coli strains were characterized by determining their adhesion to xylene, surface free energy, zeta potential, relative surface charge, and their chemical composition. The latter was done by applying X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR). No relationship between the adhesion to xylene and the water contact angles of these strains was found. Three strains had significantly lower surface free energies than the other strains. Surface free energies were either obtained from polar and dispersion parts or from Lifshitz-van der Waals and acid/base parts of the surface free energy. A correlation (r=0.97) between the polar parts and the electron-donor contributions to the acid/base part of the surface free energy was found. The zeta potentials of all strains, measured as a function of pH (2–11), were negative. Depending on the zeta potential as a function of pH, three groups were recognized among the strains tested. A relationship (r=0.84) was found between the acid/base component of the surface free energy and the zeta potential measured at pH=7.4. There was no correlation between results of XPS and IR studies. Data from the literature of XPS and IR studies of the gram-positive staphylococci and streptococci were compared with data from the gram-negativeE. coli used in this study. It appeared that in these three groups of bacteria, the polysaccharide content detected by IR corresponded well with the oxygen-to-carbon ratio detected by XPS.     

Characterization of eukaryotic cell surfaces prior to and after serum protein adsorption by X-ray photoelectron spectroscopy

Elemental surface concentration ratios N/C, O/C, and P/C of fibroblasts, HELA epithelial cells, and smooth muscle cells, prior to and after washing in the absence or presence of serum proteins, were determined by X-ray photoelectron spectroscopy. Cell surfaces appeared to adsorb hardly any serum proteins, and the relatively high P/C, as compared to N/C and O/C, elemental surface concentration ratio indicated that the cell surfaces consisted mainly of the phospholipid bilayer, with little or no proteins present. The lack of adsorption of serum proteins to the cell surfaces seems at odds with the common notion that cells require adhesive proteins in order to adhere and spread. However, the adsorption behavior of cellularly produced proteins may be completely different, particularly since they seem to be able to displace adsorbed serum proteins from biomaterials surfaces. Interestingly, only HELA epithelial cells (a tumor cell line) appeared to adsorb a very small amount of proteins.     

Increase of endogenous zeatin riboside by introduction of the ipt gene in wild type and the lateral suppressor mutant of tomato

We studied axillary meristem formation of the lateral suppressor (ls) mutant of tomato after elevating the endogenous cytokinin levels through introduction of the isopentenyltransferase (ipt) gene from Agrobacterium tumefaciens. Growth and development of several transformants were examined during in vitro culture. Transformants exhibited phenotypes varying in severity and were divided into four classes. A number of the ipt transformants had a normal phenotype, as non-transformed plants. Others showed a mild to severe cytokinin-like phenotype. Transformants with a mild phenotype exhibited reduced internode length and reduced root development. Transformants with a severe phenotype showed even shorter internodes, loss of apical dominance, reduction of leaf size, production of callus at the basis of the shoots and absence of root development or development of green non-branching roots. The severity of the phenotype correlated well with the level of ipt gene expression, as measured by northern analysis. Transformants with a severe phenotype also exhibited increased levels of zeatin riboside, but zeatin levels were not elevated. The increase in endogenous zeatin riboside levels in the ls mutant did not restore axillary meristem formation, but sometimes bulbous structures were formed in the initially empty leaf axils. Several adventitious meristems and shoots developed from below the surface of these structures. It is concluded that a reduced level of cytokinins in the ls mutant shoots is not responsible for the absence of axillary meristem formation.     

Microflora on explanted silicone rubber voice prostheses: taxonomy, hydrophobicity and electrophoretic mobility

Silicone rubber voice prostheses are implants which are inserted in a non-sterile environment and therefore become quickly colonized by micro-organisms. The micro-organisms exist on the medical grade silicone rubber as mixed biofilms of bacteria and yeasts. A total of 79 bacterial and 39 yeast strains were isolated from these biofilms by soft ultrasonic treatment. Gram-positive/catalase-negative and Gram-positive/catalase-positive cocci represented the dominant bacterial strains. The yeasts were mainly Candida species. Further characterization of cell surface properties such as hydrophobicity by microbial adhesion to hexadecane and electrophoretic mobility showed a distinct difference when the bacterial strains were compared with the yeasts. The bacterial hydrophobicities ranged from 0 to 100% adhesion to hexadecane, whereas the yeast strains, especially the Candida albicans strains, all had markedly hydrophilic cell surfaces. A comparison of the electrophoretic mobilities showed also differences between bacteria and yeast. The values for the bacteria were found to be between -2.5 to -0.5 (10^-8 m² V^-1 s^-1), whereas for the yeasts electrophoretic mobilities were more positive. Based on the adhesive properties of the isolated micro-organisms, strategies can now be developed to modify the properties of the silicone rubber to reduce biofilm formation on such prostheses.     

Flavonols and fertilization in Petunia hybrida: localization and mode of action during pollen tube growth

Flavonols form an important class of flavonoids which serve an essential function during plant reproduction. Flavonoid biosynthesis is initiated by the enzyme chalcone synthase (CHS). A high abundance of flavonols and chs mRNA was demonstrated in male and female reproductive organs of Petunia hybrida. Detailed analyses revealed precise spatial and temporal regulation of the chs promoter and flavonol synthesis in the stigma, style and ovules. Transgenic plants were generated with a complete block of flavonol biosynthesis as the result of anti-sense inhibition of chs gene activity. The absence of flavonols by this dominant mutation rendered these plants self-sterile. Pollination experiments with wild-type and mutant plants revealed that the production of flavonols in either the anthers or the pistils was required for pollen tube growth and seed set. Mutant pollen without flavonols in their exine germinated normally. However, after a short period of in vitro pollen tube growth the tips of these tubes disrupted and the protoplasm was disloaded leading to the death of the pollen grain. Addition of flavonol aglycones but not other flavonoids complemented this phenotype. Confocal laser scanning microscopy revealed the localization of high levels of flavonols throughout the wild-type pollen tube. These compounds were not detected in the exine or cell wall of growing tubes. In addition, it was observed that the flavone apigenin could completely inhibit pollen tube growth. Taken together, it is shown that flavonols play an important role in the growth of the pollen tube and their mode of action is discussed.