Moulting frequency and behavioural responses to salinity and diesel oil in Austromegabalanus psittacus (Molina) (Cirripedia: Balanidae)

Moulting frequency and behavioural responses to salinity and diesel oil concentration were studied in specimens of the giant barnacle Austromegabalanus psittacus (Molina). Moulting frequency and frequency and type of cirral beat, in addition to opercular valve closure time, were measured under controlled conditions. A binary factorial experimental design was carried out at salinities of 20 and 30‰ and diesel oil concentrations of 0.1 and 0.5% v/v. Moulting frequency was greater at 30‰ than at 20‰ salinity and at 0.1% oil concentration than at both 0.5% oil concentration and in controls; it is unlikely that this signified variations in growth. Diesel oil provoked lethal effects at 0.5%, with an average lethal time of 8 days; at 0.1%, only sublethal effects were generated. Cirral beat frequency was greater at 0.1 and 0.5% diesel oil concentration than in controls. This was probably associated with an increase in metabolism, since the most frequent cirral beats are associated with respiration and the active capture of plankton. The effects of the contaminant varied with time, as observed at 15 and 60 min. The opercular valve closure time was longer in controls and decreased as diesel oil concentration increased. Results suggest that this species is highly resistant to pollution, although contaminants could provoke changes in the feeding and growth of specimens. Local variations in salinity have only minor effects on barnacle behaviour.     

Force to Divide: Structural and Mechanical Requirements for Actomyosin Ring Contraction

One of the unresolved questions in the field of cell division is how the actomyosin cytoskeleton remains structurally organized while generating the contractile force to divide one cell into two. In analogy to the actomyosin-based force production mechanism in striated muscle, it was originally proposed that contractile stress in the actomyosin ring is generated via a sliding filament mechanism within an organized sarcomere-like array. However, over the last 30 years, ultrastructural and functional studies have noted important distinctions between cytokinetic structures in dividing cells and muscle sarcomeres. Myosin-II motor activity is not always required, and there is evidence that actin depolymerization contributes to contraction. In this Review, the architecture and contractile dynamics of the actomyosin ring at the cell division plane will be discussed. We will report the interdisciplinary advances in the field as well as their integration into a mechanistic understanding of contraction in cell division and in other biological processes that rely on an actomyosin-based force-generating system.     

Inhibitory properties of cystatin F and its localization in U937 promonocyte cells

Cystatin F is a recently discovered type II cystatin expressed almost exclusively in immune cells. It is present intracellularly in lysosome-like vesicles, which suggests a potential role in regulating papain-like cathepsins involved in antigen presentation. Therefore, interactions of cystatin F with several of its potential targets, cathepsins F, K, V, S, H, X and C, were studied in vitro. Cystatin F tightly inhibited cathepsins F, K and V with Ki values ranging from 0.17 nM to 0.35 nM, whereas cathepsins S and H were inhibited with 100-fold lower affinities (Ki approximately 30 nM). The exopeptidases, cathepsins C and X were not inhibited by cystatin F. In order to investigate the biological significance of the inhibition data, the intracellular localization of cystatin F and its potential targets, cathepsins B, H, L, S, C and K, were studied by confocal microscopy in U937 promonocyte cells. Although vesicular staining was observed for all the enzymes, only cathepsins H and X were found to be colocalized with the inhibitor. This suggests that cystatin F in U937 cells may function as a regulatory inhibitor of proteolytic activity of cathepsin H or, more likely, as a protection against cathepsins misdirected to specific cystatin F containing endosomal/lysosomal vesicles. The finding that cystatin F was not colocalized with cystatin C suggests distinct functions for these two cysteine protease inhibitors in U937 cells.     

LPS-induced bronchial hyperreactivity: interference by mIL-10 differs according to site of delivery

When administered to mice systemically or via the airways, LPS induces bronchoconstriction (BC) and/or bronchopulmonary hyperreactivity (BHR), associated with inflammation. Accordingly, a relationship between inflammation and allergic and nonallergic BHR can be hypothesized. We therefore studied the interference of the anti-inflammatory cytokine murine IL-10 (mIL-10) with LPS-induced lung inflammation, BC, and BHR. mIL-10 was administered directly into the airways by intranasal instillation or generated in vivo after muscle electrotransfer of mIL-10-encoding plasmid. Electrotransfer led to high mIL-10 circulating levels for a longer time than after the injection of recombinant mIL-10 (rmIL-10). rmIL-10 administered intranasally reduced lung inflammation and BHR after LPS administration into airways. It also reduced the ex vivo production of TNF-alpha by LPS-stimulated lung tissue explants. Two days after electrotransfer, mIL-10 blood levels were elevated, but lung inflammation, BC, and BHR persisted unaffected. Blood mIL-10 reaches the airways poorly, which probably accounts for the ineffectiveness of mIL-10-encoding plasmid electrotransfer. When LPS was aerosolized 15 days after electrotransfer, lung inflammation persisted but BHR was significantly reduced, an effect that may be related to the longer exposure of the relevant cells to mIL-10. The dissociation between inflammation and BHR indicates that both are not directly correlated. In conclusion, this study shows that mIL-10 is efficient against BHR when present in the airway compartment. Despite this, the muscle electrotransfer with mIL-10-encoding plasmid showed a protective effect against BHR after a delay of 2 wk that should be further investigated.     

Signaling switches and bistability arising from multisite phosphorylation in protein kinase cascades

Mitogen-activated protein kinase (MAPK) cascades can operate as bistable switches residing in either of two different stable states. MAPK cascades are often embedded in positive feedback loops, which are considered to be a prerequisite for bistable behavior. Here we demonstrate that in the absence of any imposed feedback regulation, bistability and hysteresis can arise solely from a distributive kinetic mechanism of the two-site MAPK phosphorylation and dephosphorylation. Importantly, the reported kinetic properties of the kinase (MEK) and phosphatase (MKP3) of extracellular signal-regulated kinase (ERK) fulfill the essential requirements for generating a bistable switch at a single MAPK cascade level. Likewise, a cycle where multisite phosphorylations are performed by different kinases, but dephosphorylation reactions are catalyzed by the same phosphatase, can also exhibit bistability and hysteresis. Hence, bistability induced by multisite covalent modification may be a widespread mechanism of the control of protein activity.     

Identification of a sporozoite-specific member of the Toxoplasma SAG superfamily via genetic complementation

Toxoplasma gondii sporozoites possess an array of stage-specific antigens that are localized to the membrane and internal cellular space, as well as secreted into the primary parasitophorous vacuole. Specific labelling of viable sporozoites excysted from oocysts reveals a complex admixture of surface proteins partially shared with tachyzoites. SAG1, SRS3 and SAG3 were detected on sporozoites as well as numerous minor antigens. In contrast, tachyzoite SAG2A and B were completely absent whereas a dominant 25 kDa protein was unique to the sporozoite surface. The sporozoite gene encoding this protein was identified in tachyzoites genetically complemented with a sporozoite cDNA library and cloned via site-specific recombination into a bacterial shuttle vector. The sporozoite cDNA identified in these experiments encoded a protein with conserved structural features of the prototypical T. gondii SAG1 (P30) and shared sequence identity with surface proteins from Sarcocystis spp. This new member of the SAG superfamily was designated SporoSAG. Expression of SporoSAG in tachyzoites conferred enhanced invasion on transgenic parasites suggesting a role for this protein in oocyst/sporozoite transmission to susceptible hosts.     

pH-dependent quenching of the fluorescence of tryptophan residues in class A beta-lactamase from E. coli (TEM-1)

We performed an investigation of the pH-dependent quenching of the fluorescence of tryptophan residues of TEM-1 beta-lactamase from E. coli by uncharged and charged quenchers. pH-dependent Stern-Volmer constants (Ksv/pH) of tryptophan residues allowed us to determine subtle but discrete structurally and functionally important processes.     

Miniaturized pH biosensors based on electrochemically modified electrodes with biocompatible polymers

Potentiometric pH sensors based on linear polyethylenimine (L-PEI) and linear polypropylenimine(L-PPI), two synthetic enzymes and biocompatible polymers, films were prepared by electropolymerization of three different monomers: ethylenediamine (EDA), 1,3-diaminopropane (1,3-DAP) and diethylenetriamine (DETA) in order to be used in clinical, dermatological and biological applications, such as in vivo analysis. In a first step a biosensor was tested which consisted in a platinum wire protruded from glass sheath. The polymer film coated on these platinum electrodes showed good linear potentiometric responses to pH changes from pH 3 to 10. Resulting electrodes present both good reversibility and good stability versus time. The effect of the different polymer film thicknesses to potentiometric responses was also studied. This study allowed us to develop a miniaturized pH biosensor in the second step. This sensor was fabricated using photo-lithography, followed by sputtering and lift-off processes, and it included an electronic detection system. We have also successfully studied the potentiometric responses to pH changes of this device over a period of 1 month, and so we propose this new pH micro-biosensor as an alternative to classical pH sensors currently used in dermatology.