Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

High‐Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi,Sb)2Te3 Matrix

The (Bi,Sb)₂Te₃ (BST) compounds have long been considered as the benchmark of thermoelectric (TE) materials near room temperature especially for refrigeration. However, their unsatisfactory TE performances in wide‐temperature range severely restrict the large‐scale applications for power generation. Here, using a self‐assembly protocol to deliver a homogeneous dispersion of 2D inclusion in matrix, the first evidence is shown that incorporation of MXene (Ti₃C₂T_x) into BST can simultaneously achieve the improved power factor and greatly reduced thermal conductivity. The oxygen‐terminated Ti₃C₂T_x with proper work function leads to highly increased electrical conductivity via hole injection and retained Seebeck coefficient due to the energy barrier scattering. Meanwhile, the alignment of Ti₃C₂T_x with the layered structure significantly suppresses the phonon transport, resulting in higher interfacial thermal resistance. Accordingly, a peak ZT of up to 1.3 and an average ZT value of 1.23 from 300 to 475 K are realized for the 1 vol% Ti₃C₂T_x/BST composite. Combined with the high‐performance composite and rational device design, a record‐high thermoelectric conversion efficiency of up to 7.8% is obtained under a temperature gradient of 237 K. These findings provide a robust and scalable protocol to incorporate MXene as a versatile 2D inclusion for improving the overall performance of TE materials toward high energy‐conversion efficiency.     

Conductive Hole‐Selective Passivating Contacts for Crystalline Silicon Solar Cells

Defect state passivation and conductivity of materials are always in opposition; thus, it is unlikely for one material to possess both excellent carrier transport and defect state passivation simultaneously. As a result, the use of partial passivation and local contact strategies are required for silicon solar cells, which leads to fabrication processes with technical complexities. Thus, one material that possesses both a good passivation and conductivity is highly desirable in silicon photovoltaic (PV) cells. In this work, a passivation‐conductivity phase‐like diagram is presented and a conductive‐passivating‐carrier‐selective contact is achieved using PEDOT:Nafion composite thin films. A power conversion efficiency of 18.8% is reported for an industrial multicrystalline silicon solar cell with a back PEDOT:Nafion contact, demonstrating a solution‐processed organic passivating contact concept. This concept has the potential advantages of omitting the use of conventional dielectric passivation materials deposited by costly high‐vacuum equipment, energy‐intensive high‐temperature processes, and complex laser opening steps. This work also contributes an effective back‐surface field scheme and a new hole‐selective contact for p‐type and n‐type silicon solar cells, respectively, both for research purposes and as a low‐cost surface engineering strategy for future Si‐based PV technologies.     

Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) battery is a next generation high energy density battery, but its practical application is hindered by the poor cycling stability derived from the severe shuttling of lithium polysulfides (LiPSs). Catalysis is a promising way to solve this problem, but the rational design of relevant catalysts is still hard to achieve. This paper reports the WS₂–WO₃ heterostructures prepared by in situ sulfurization of WO₃, and by controlling the sulfurization degree, the structure is controlled, which balances the trapping ability (by WO₃) and catalytic activity (by WS₂) toward LiPSs. As a result, the WS₂–WO₃ heterostructures effectively accelerate LiPS conversion and improve sulfur utilization. The Li–S battery with 5 wt% WS₂–WO₃ heterostructures as additives in the cathode shows an excellent rate performance and good cycling stability, revealing a 0.06% capacity decay each cycle over 500 cycles at 0.5 C. By building an interlayer with such heterostructure‐added graphenes, the battery with a high sulfur loading of 5 mg cm^?2 still shows a high capacity retention of 86.1% after 300 cycles at 0.5 C. This work provides a rational way to prepare the metal oxide–sulfide heterostructures with an optimized structure to enhance the performance of Li–S batteries.     

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Lithium–sulfur batteries (LSBs) are considered promising candidates for the next‐generation energy‐storage systems due to their high theoretical capacity and prevalent abundance of sulfur. Their reversible operation, however, encounters challenges from both the anode, where dendritic and dead Li‐metal form, and the cathode, where polysulfides dissolve and become parasitic shuttles. Both issues arise from the imperfection of interphases between electrolyte and electrode. Herein, a new lithium salt based on an imide anion with fluorination and unsaturation in its structure is reported, whose interphasial chemistries resolve these issues simultaneously. Lithium 1, 1, 2, 2, 3, 3‐hexafluoropropane‐1, 3‐disulfonimide (LiHFDF) forms highly fluorinated interphases at both anode and cathode surfaces, which effectively suppress formation of Li‐dendrites and dissolution/shuttling of polysulfides, and significantly improves the electrochemical reversibility of LSBs. In a broader context, this new Li salt offers a new perspective for diversified beyond Li‐ion chemistries that rely on a Li‐metal anode and active cathode materials.     

心力衰竭致认知功能紊乱机制的研究进展

心力衰竭(Heart Failure, HF)的主要特征在于异常的心脏收缩和(或)舒张功能,能够导致全身多脏器、多组织功能紊乱。其中HF常见的中枢系统并发症--认知功能紊乱(Cognitive Disorders, CDs)主要表现为学习能力和记忆力减退、定向力障碍以及执行力受损等;其主要病理生理机制包括:血流动力学改变及脑血流自身调节功能受损导致的脑灌注不足、自身免疫系统激活导致的神经炎症反应和神经-内分泌轴紊乱导致的内分泌紊乱等。流行病学调查发现,HF患者罹患CDs的风险明显高于非HF患者;CDs严重影响HF患者的生活质量,并显著增加不良预后的风险。本文对目前HF导致CDs的发病机制进行了详细地阐述和总结,以期有助于疾病的治疗和后续科学研究。     

伤椎置钉联合短节段内固定与单纯短节段固定治疗胸腰椎爆裂性骨折的比较研究

目的:比较伤椎置钉联合短节段内固定与单纯短节段固定治疗胸腰椎爆裂性骨折的临床疗效、固定效果及其对患者炎症反应和脊髓损伤的影响。方法:选取2014年3月到2016年12月期间我院收治的胸腰椎爆裂性骨折患者94例,根据手术方法的不同将患者分为伤椎置钉组(40例)和短节段内固定组(44例)。短节段内固定组患者采用单纯后路短节段椎弓根螺钉内固定进行治疗,伤椎置钉组采用伤椎置钉联合后路短节段椎弓根螺钉内固定进行治疗。比较两组患者的手术时间、术中出血量、住院时间、伤椎前沿高度比、Cobb’s角、伤椎椎体楔形变角、视觉模拟评分(VAS)和Oswestry功能障碍指数(ODI),炎性因子指标、脊髓损伤指标及术后并发症。结果:伤椎置钉组的手术时间长于短节段内固定组(P<0.05),术后6个月、术后12个月伤椎置钉组的伤椎前沿高度比明显高于短节段内固定组,Cobb’s角、伤椎椎体楔形变角明显低于短节段内固定组(P<0.05),术前、术后1周、术后6个月、术后12个月两组患者的VAS评分和ODI比较差异无统计学意义(P>0.05),术后3 d两组患者血清中IL-1β、IL-6、IL-8、TNF-α和pNF-H、NSE、S100β、GFAP水平比较差异均无统计学意义(P>0.05)。随访期间两组患者均未出现严重并发症。结论:伤椎置钉联合后路短节段椎弓根螺钉内固定可有效改善胸腰椎爆裂性骨折患者的椎体高度、Cobb’s角和伤椎椎体楔形变角,并且不会增加脊髓损伤和机体的炎症反应。     

持续颅内压监测对大面积脑梗死外科治疗预后的应用价值

目的:探讨持续颅内压(ICP)监测对大面积脑梗死外科治疗预后的应用价值。方法:选取2013年3月至2018年3月期间在我院接受治疗的大面积脑梗死患者100例作为研究对象,所有患者经去骨瓣减压术后行ICP监测和生命体征监测,通过结果分为:低压组62例(2.70kPa≤ICP5.30kPa),高压组38例(ICP≥5.30 kPa)。记录患者ICP监测数值,接收者操作特征(ROC)曲线分析患者预后情况,对患者进行术后3个月内随访,了解患者平常活动能力进行判断预后的状况。观察ICP与预后的相关性。结果:两组患者性别、年龄、室速、室性早搏、糖尿病、高血压病、脑卒中、高脂血症、风心病、冠心病、扩张性心肌病、既往心肌梗死、肥厚性心肌病、甲亢性心脏病等资料比较差异无统计学意义(P0.05)。低压组患者中预后良好的ICP监测值显著低于预后不良者(P0.05),高压组中预后良好的ICP监测值显著低于预后不良者(P0.05)。ICP预测大面积脑梗死外科治疗预后的ROC曲线面积0.704,采用最大约等指数计算得出ICP预测大面积脑梗死外科治疗预后的最大AUC面积相应参数截止值为4.89,其中敏感度为0.435,特异性为0.896。结论:持续ICP监测结果显示ICP值越小,患者的预后就越好,ICP值越高,患者的预后越差。ICP监测对大面积脑梗死外科治疗的预后具有预测价值,对判断和改善预后能起到有效帮助,值得在临床推广应用。