Alginate immobilization of Spirulina platensis for wastewater treatment

Immobilization of cyanobacterium Spirulina platensis in sodium alginate (1.5 %) gave the best quality of bead and 15-16 beads were formed per mL of aqueous solution of alginate. The immobilized cells were used in a batch process for treatment of diluted sewage. After 8 days, 95 % of BOD5, 77 % of COD, 90 % of ammonia, and 94 % of TSS were removed.     

Coupling of a neural filter and a neural controller for improvement of fermentation performance

The noise associated with fermentation processes is normally minimised by a filtering technique. However, sometimes the noise may be beneficial if it is properly regulated. For recombinant -galactosidase production in a fed-batch fermentation subject to Gaussian disturbances, it is shown that a neural network trained to act as a noise filter can allow disturbances of only a particular variance which maximizes -galactosidase synthesis. By coupling such a filter with a neural controller, the productivity may be enhanced beyond what is possible with static filtering and either proportional-integral-derivative or neural control.     

Comparison of response of two C3 species to leaf water relation,proline synthesis,gas exchange and water use under periodic water stress

Water relations, proline content and gas exchange of leaf were investigated under periodic water stress for two C3 plants (eggplant and tomato) in a greenhouse to study comparative adaptive responses. Although both species showed reduced water content of leaf and increased osmolality and proline content under low soil water potential, the recovery capacity after the stress was better in eggplant than tomato. Both species over-accumulated proline under low soil water potential and returned to its initial concentration during the recovery, indicating that proline may act as an osmoprotectant during drought. Proline was directly corresponding with osmolality during stress, and dehydration stress reduced the gas exchange parameters such as transpiration rate (ET), stomatal conductance (GS), and photosynthesis rate (Pn). At the final stage of the experiment both species showed 2.6 and 3.3 times lower Pn and 27 and 19 times lower GS for eggplant and tomato, respectively, as compared to control. But after stress was relieved by rewatering, both plants increased GS for 2 to 3 times and Pn for 4.5 times. Eggplant showed better water use efficiency (WUE) in relation to fruit production under the stress than tomato. Higher biomass allocation at root and fruit parts in eggplant indicated more efficient recovery than that of tomato. These findings inferred that both C3 plants developed internal complementary drought survival mechanism by lowering relative water content, increasing proline, and decreasing stomatal conductance but eggplants withstood the periodic draughting better than tomato, mainly due to its ability to recover from a water stress condition.     

QSAR study on some pyridoacridine ascididemin analogues as anti-tumor agents

Pyridoacridine ascididemin analogues have been reported as anticancer agents for their interesting antitumor activity against human cancer cells. A quantitative structure–activity relationship (QSAR) analysis of ascididemin analogues was attempted using the physicochemical parameters and the electrotopological state atom (ETSA) indices. This study indicates that the electron withdrawing substituents with higher MR (molar refractivity) value at R₁ position favor the anti-tumor activity and the presence of NHR (R is hydrogen or alkyl group) at the R₃ position has contribution to the anti-tumor activity. ETSA indices have been incorporated as independent variable in the QSAR model with physicochemical parameters. It clearly suggests the importance of atoms 2, 3, 4, 5, 6 and 7 to the anti-tumor activity.     

Condition number analysis for a preliminary evaluation of recombinant fermentation performance

Fermentations utilizing genetically modified microbes require accurate monitoring and control. This is done through a control algorithm based on a process model; control usually involves continual measurements and manipulations of the substrate feed rate and its concentration. Since variations in the data, due to the limitations on measurements or external influences, affect the performance, it is useful to have a quick evaluation of these effects before sensitivities or control strategies are studied in detail. Condition numbers provide a convenient way to do this. They have been employed here for a continuous fermentation for -galactosidase production by Saccharomyces cerevisiae containing the plasmid pSXR125. When all recombinant cells have the same number of copies of the plasmid, a selective medium permits less precision in measurement and manipulation than a non-selective medium, but this is reversed when there are two sub-populations with different numbers of plasmids. The more stringent requirement for a selective medium in the latter case is, however, offset by its greater productivity.     

Genetic transformation of Indian bread (<Emphasis Type="Italic">T. aestivum</Emphasis>) and pasta (<Emphasis Type="Italic">T. durum</Emphasis>) wheat by particle bombardment of mature embryo-derived calli

Background  

Particle bombardment has been successfully employed for obtaining transgenics in cereals in general and wheat in particular. Most of these procedures employ immature embryos which are not available throughout the year. The present investigation utilizes mature seeds as the starting material and the calli raised from the hexaploid Triticum aestivum and tetraploid Triticum durum display a high regeneration response and were therefore used as the target tissue for genetic transformation by the biolistic approach.     

Optimizing initial plasmid copy number distribution for improved protein activity in a recombinant fermentation

Recombinant bacterial cells in a fermentation broth rarely contain the same number of plasmids, even though this simplification is often used. Recent work has however indicated limitations of the simplified approach. Based on these studies, the distribution of plasmid copy numbers per cell has been represented macroscopically here in a Gaussian form for the fraction of biomass as a function of the copy number. Applying this distribution and an experimentally validated kinetic model to glyceraldehyde-3-phosphate dehydrogenase (GAPDH) synthesis by Escherichia coli containing the plasmid pBR Eco gap, it is seen that GAPDH production in a batch fermentation is maximized by a particular initial (non-zero) copy number variance and an optimal duration. To implement this distribution in a bioreactor, it is suggested that the profile may be discretized, inocula corresponding to the mean copy number of each fraction prepared, and then combined to obtain the seed culture.     

Are microbes intelligent beings?: An assessment of cybernetic modeling

Microorganisms growing in a multi-substrate medium have different and varying preferences for the various components of the medium. The preferences depend on the operating conditions and the substrates may be utilized sequentially or simultaneously. Sometimes an organism may change its preferences among substrates and/or switch between sequential and simultaneous utilization. These aspects are difficult to describe through models based on chemical and physical laws alone. Cybernetic modeling ascribes to microorganisms the ability to perceive their environment (i.e. the growth medium) and make 'intelligent' choices regarding substrate utilization to maximize an objective, which is usually the growth rate. This article reviews the development of cybernetic modeling since it began in 1982. Different workers have suggested different perspectives of how microbes make optimal use of their resources. These are discussed and future directions for improvement are indicated.     

Passiflora plastome sequencing reveals widespread genomic rearrangements

Although past studies have included Passiflora among angiosperm lineages with highly rearranged plastid genomes (plastomes), knowledge about plastome organization in the genus is limited. So far only one draft and one complete plastome have been published. Expanded sampling of Passiflora plastomes is needed to understand the extent of the genomic rearrangement in the genus, which is also unusual in having biparental plastid inheritance and plastome‐genome incompatibility. We sequenced 15 Passiflora plastomes using either Illumina paired‐end or shotgun cloning and Sanger sequencing approaches. Assembled plastomes were annotated using Dual Organellar GenoMe Annotator (DOGMA) and tRNAscan‐SE. The Populus trichocarpa plastome was used as a reference to estimate genomic rearrangements in Passiflora by performing whole genome alignment in progressiveMauve. The phylogenetic distribution of rearrangements was plotted on the maximum likelihood tree generated from 64 plastid encoded protein genes. Inverted repeat (IR) expansion/contraction and loss of the two largest hypothetical open reading frames, ycf1 and ycf2, account for most plastome size variation, which ranges from 139 262 base pairs (bp) in P. biflora to 161 494 bp in P. pittieri. Passiflora plastomes have experienced numerous inversions, gene and intron losses along with multiple independent IR expansions and contractions resulting in a distinct organization in each of the three subgenera examined. Each Passiflora subgenus has a unique plastome structure in terms of gene content, order and size. The phylogenetic distribution of rearrangements shows that Passiflora has experienced widespread genomic changes, suggesting that such events may not be reliable phylogenetic markers.     

Low Birth Weight at Term and Its Determinants in a Tertiary Hospital of Nepal: A Case-Control Study

Birth weight of a child is an important indicator of its vulnerability for childhood illness and chances of survival. A large number of infant deaths can be averted by appropriate management of low birth weight babies and prevention of factors associated with low birth weight. The prevalence of low birth weight babies in Nepal is estimated to be about 12-32%.Our study aimed at identifying major determinants of low birth weight among term babies in Nepal. A hospital-based retrospective case control study was conducted in maternity ward of Tribhuvan University Teaching Hospital from February to July 2011. A total of 155 LBW babies and 310 controls were included in the study. Mothers admitted to maternity ward during the study period were interviewed, medical records were assessed and anthropometric measurements were done. Risk factors, broadly classified into proximal and distal factors, were assessed for any association with birth of low-birth weight babies. Regression analysis revealed that a history of premature delivery (adjusted odds ratio; aOR5.24, CI 1.05-26.28), hard physical work during pregnancy (aOR1.48, CI 0.97-2.26), younger age of mother (aOR1.98, CI 1.15-3.41), mothers with haemoglobin level less than 11gm/dl (aOR0.51, CI0.24-1.07) and lack of consumption of nutritious food during pregnancy (aOR1.99, CI 1.28-3.10) were significantly associated with the birth of LBW babies. These factors should be addressed with appropriate measures so as to decrease the prevalence of low birth weight among term babies in Nepal.