Is there a link between shell morphology and parasites of zebra mussels?

The shell morphology of zebra mussels, Dreissena polymorpha, was analyzed to determine if alterations in shell shape and asymmetry between valves were related to its infection status, i.e. infected or not by microparasites like ciliates Ophryoglena spp. or intracellular bacteria Rickettsiales-like organisms (RLOs), and by macroparasites like trematodes Phyllodistomum folium and Bucephalus polymorphus. For microparasites, two groups of mussels were observed depending on shell measurements. Mussels with the more concave shells were the most parasitized by ciliates. This could be more a consequence than a cause and we hypothesized that a modification of the water flow through the mantle cavity could promote the infection with a ciliate. There were more RLOs present in the most symmetrical individuals. A potential explanation involved a canalization of the left-right asymmetry as a by-product of the parasite infection. Trematode infections were associated with different responses in valve width. Females infected by P. folium displayed significantly higher symmetry in valve width compared with non-infected congeners, whereas the infection involved an opposite pattern in males. B. polymorphus was also linked to a decrease in valve width asymmetry. This study suggested that a relationship exists between parasitism and shell morphology through the physiological condition of host zebra mussels.     

ESTs library from embryonic stages reveals tubulin and reflectin diversity in Sepia officinalis (Mollusca — Cephalopoda)

New molecular resources regarding the so-called “non-standard models” in biology extend the present knowledge and are essential for molecular evolution and diversity studies (especially during the development) and evolutionary inferences about these zoological groups, or more practically for their fruitful management. Sepia officinalis, an economically important cephalopod species, is emerging as a new lophotrochozoan developmental model. We developed a large set of expressed sequence tags (ESTs) from embryonic stages of S. officinalis, yielding 19,780 non-redundant sequences (NRS). Around 75% of these sequences have no homologs in existing available databases. This set is the first developmental ESTs library in cephalopods. By exploring these NRS for tubulin, a generic protein family, and reflectin, a cephalopod specific protein family,we point out for both families a striking molecular diversity in S. officinalis.     

Identification of Regulators of Polyploidization Presents Therapeutic Targets for Treatment of AMKL

The mechanism by which cells decide to skip mitosis to become polyploid is largely undefined. Here we used a high-content image-based screen to identify small-molecule probes that induce polyploidization of megakaryocytic leukemia cells and serve as perturbagens to help understand this process. Our?study implicates five networks of kinases that?regulate the switch to polyploidy. Moreover, we find that dimethylfasudil (diMF, H-1152P) selectively increased polyploidization, mature cell-surface marker expression, and apoptosis of malignant megakaryocytes. An integrated target identification approach employing proteomic and shRNA screening revealed that a major target of diMF is Aurora kinase A (AURKA). We further find that MLN8237 (Alisertib), a selective inhibitor of AURKA, induced polyploidization and expression of mature megakaryocyte markers in acute megakaryocytic leukemia (AMKL) blasts and displayed potent anti-AMKL activity in?vivo. Our findings provide a rationale to support clinical trials of MLN8237 and other inducers of polyploidization and differentiation in AMKL.     

Establishing equivalence for microbial-growth-inhibitory effects ("iso-hurdle rules") by analyzing disparate listeria monocytogenes data with a gamma-type predictive model

Preservative factors act as hurdles against microorganisms by inhibiting their growth; these are essential control measures for particular food-borne pathogens. Different combinations of hurdles can be quantified and compared to each other in terms of their inhibitory effect ("iso-hurdle"). We present here a methodology for establishing microbial iso-hurdle rules in three steps: (i) developing a predictive model based on existing but disparate data sets, (ii) building an experimental design focused on the iso-hurdles using the model output, and (iii) validating the model and the iso-hurdle rules with new data. The methodology is illustrated with Listeria monocytogenes. Existing data from industry, a public database, and the literature were collected and analyzed, after which a total of 650 growth rates were retained. A gamma-type model was developed for the factors temperature, pH, a(w), and acetic, lactic, and sorbic acids. Three iso-hurdle rules were assessed (40 logcount curves generated): salt replacement by addition of organic acids, sorbic acid replacement by addition of acetic and lactic acid, and sorbic acid replacement by addition of lactic/acetic acid and salt. For the three rules, the growth rates were equivalent in the whole experimental domain (γ from 0.1 to 0.5). The lag times were also equivalent in the case of mild inhibitory conditions (γ ≥ 0.2), while they were longer in the presence of salt than acids under stress conditions (γ < 0.2). This methodology allows an assessment of the equivalence of inhibitory effects without intensive data generation; it could be applied to develop milder formulations which guarantee microbial safety and stability.     

Bench and mathematical modeling of the effects of breathing a helium/oxygen mixture on expiratory time constants in the presence of heterogeneous airway obstructions

ABSTRACT: BACKGROUND: Expiratory time constants are used to quantify emptying of the lung as a whole, and emptying of individual lung compartments. Breathing low-density helium/oxygen mixtures may modify regional time constants so as to redistribute ventilation, potentially reducing gas trapping and hyperinflation for patients with obstructive lung disease. In the present work, bench and mathematical models of the lung were used to study the influence of heterogeneous patterns of obstruction on compartmental and whole-lung time constants. METHODS: A two-compartment mechanical test lung was used with the resistance in one compartment held constant, and a series of increasing resistances placed in the opposite compartment. Measurements were made over a range of lung compliances during ventilation with air or with a 8/22% mixture of helium/oxygen. The resistance imposed by the breathing circuit was assessed for both gases. Experimental results were compared with predictions of a mathematical model applied to the test lung and breathing circuit. In addition, compartmental and whole-lung time constants were compared with those reported by the ventilator. RESULTS: Time constants were greater for larger minute ventilation, and were reduced by substituting helium/oxygen in place of air. Notably, where time constants were long due to high lung compliance (i.e. low elasticity), helium/oxygen improved expiratory flow even for a low level of resistance representative of healthy, adult airways. In such circumstances, the resistance imposed by the external breathing circuit was significant. Mathematical predictions were in agreement with experimental results. Time constants reported by the ventilator were wellcorrelated with those determined for the whole-lung and for the low-resistance compartment, but poorly correlated with time constants determined for the high-resistance compartment. CONCLUSIONS: It was concluded that breathing a low-density gas mixture, such as helium/oxygen, can improve expiratory flow from an obstructed lung compartment, but that such improvements will not necessarily affect time constants measured by the ventilator. Further research is required to determine if alternative measurements made at the ventilator level are predictive of regional changes in ventilation. It is anticipated that such efforts will be aided by continued development of mathematical models to include pertinent physiological and pathophysiological phenomena that are difficult to reproduce in mechanical test systems.     

Comparison of serum HBsAg quantitation by four immunoassays, and relationships of HBsAg level with HBV replication and HBV genotypes

Background

The decline in hepatitis B virus surface antigen (HBsAg) may be an early predictor of the viral efficacy of Hepatitis B virus (HBV) therapy. The HBsAg levels obtained by different immunoassays now need comparing and the relationships between levels of HBsAg and HBV DNA alongside HBsAg and genotype must be evaluated.

Methodology/Principal Findings

HBsAg levels were compared among 80 patients using the Abbott Architect assay, a commercial immunoassay approved for HBsAg detection and quantitation, and three other assays derived from immunoassays approved for HBsAg detection (manufactured by Diasorin, Bio-Rad and Roche). Good correlation was found between the Abbot vs. Diasorin, Bio-Rad and Roche assays with narrow 95% limits of agreement and small mean differences: −0.06 to 0.11, −0.09 log₁₀ IU/mL; −0.57 to 0.64, −0.04 log₁₀ IU/mL; −0.09 to 0.45, −0.27 log₁₀ IU/mL, respectively. These agreements were not affected by genotypes A or D. HBsAg was weakly correlated with HBV DNA, whatever the HBsAg assay used: Abbott, ρ = 0.36 p = 0.001, Diasorin ρ = 0.34, p = 0.002; Bio-Rad ρ = 0.37, p<0.001; or Roche ρ = 0.41, p<0.001. This relationship between levels of HBsAg and HBV DNA seemed to depend on genotypes. Whereas HBsAg (Abbott assay) tended to correlate with HBV DNA for genotype A (ρ = 0.44, p = 0.02), no such correlation was significant for genotypes D (ρ = 0.29, p = 0.15).

Conclusion/Significance

The quantitation of HBsAg in routine clinical samples is comparable between the reference assay and the adapted assays with acceptable accuracy limits, low levels of variability and minimum discrepancy. While HBsAg quantitation is not affected by HBV genotype, the observed association between levels of HBsAg and HBV DNA seems genotype dependent.     

Wing size and shape variation of Phlebotomus papatasi (Diptera: Psychodidae) populations from the south and north slopes of the Atlas Mountains in Morocco

The wing shape and size morphology of populations of the medically important phlebotomine sand fly, Phlebotomus papatasi, were examined in two endemic (south of the Atlas Mountains) and nonendemic (north of the Atlas Mountains) foci of cutaneous leishmaniasis by using geometric morphometrics in Morocco. Although it is present in all of Morocco, P. papatasi is the main vector of Leishmania major in only southern part of the Atlas Mountains. There are four major mountain ranges that serve as geographical barriers for species distribution in the study area and at least four gaps were recognized among these barriers. We found statistically significant differences in wing shape morphology between southern and northern populations. Analysis clearly recognized two main groups of populations on both sides of the mountains. The graphical depiction of Principal Component Analysis (PCA) and Canonical Variates Analysis (CVA) confirmed our morphometric study suggesting that the difference in wing morphology between the populations indicates that the population of P. papatasi shows phenotypic plasticity in the study area. According to centroid size analyses, which were used as measures of wing size differences among different sites, the north population of P. papatasi had relatively larger wings than the south population.