Production of 2,3-butanediol from glucose byBacillus licheniformis

Bacillus licheniformis produced 2,3-butanediol from glucose with an optimum yield of 47 g/100 g glucose after 72 h of growth on a peptone/beef extract medium containing 2% (w/v) glucose at pH 6.0 and 37°C. This yield of 2,3-butanediol was higher than those previously reported forKlebsiella oxytoca (37 g/100 g glucose) andBacillus polymyxa (24 g/100 glucose).     

Discovery of 5-(2-chloro-4′-(1H-imidazol-1-yl)-[1,1′-biphenyl]-4-yl)-1H-tetrazole as potent and orally efficacious S-nitrosoglutathione reductase (GSNOR) inhibitors for the potential treatment of COPD

Endogenous nitrosothiols (SNOs) including S-nitrosoglutathione (GSNO) serve as reservoir for bioavailable nitric oxide (NO) and mediate NO-based signaling, inflammatory status and smooth muscle function in the lung. GSNOR inhibition increases pulmonary GSNO and induces bronchodilation while reducing inflammation in lung diseases. In this letter, design, synthesis and structure–activity relationships (SAR) of novel imidazole-biaryl-tetrazole based GSNOR inhibitors are described. Many potent inhibitors (30, 39, 41, 42, 44, 45 and 58) were identified with low nanomolar activity (IC₅₀s: <15?nM) along with adequate metabolic stability. Lead compounds 30 and 58 exhibited good exposure and oral bioavailability in mouse pharmacokinetic (PK) study. Compound 30 was selected for further profiling and revealed comparable mouse and rat GSNOR potency, high selectivity against alcohol dehydrogenase (ADH) and carbonyl reductase (CBR1) family of enzymes, low efflux ratio and permeability in PAMPA, a high permeability in CALU-3 assay, significantly low hERG activity and minimal off-target activity. Further, an in vivo efficacy of compound 30 is disclosed in cigarette smoke (CS) induced mouse model for COPD.     

Kinetochore microtubule numbers of different sized chromosomes

For three species of grasshoppers the volumes of the largest and the smallest metaphase chromosome differ by a factor of 10, but the microtubules (MTs) attached to the individual kinetochores show no corresponding range in numbers. Locusta mitotic metaphase chromosomes range from 2 to 21 μm, and the average number of MTs per kinetochore is 21 with an SD of 4.6. Locusta meiotic bivalents at late metaphase I range from 4 to 40 μm(3), and the kinetochore regions (= two sister kinetochores facing the same spindle pole) have an average of 25 kinetochore microtubules (kMTs) with an SD of 4.9. Anaphase velocities are the same at mitosis and meiosis I. The smaller mitotic metaphase chromosomes of neopodismopsis are similar in size, 6 to 45 μm(3), to Locusta, but they have an average more kMTs, 33, SD = 9.2. The four large Robertsonian fusion chromosomes of neopodismopsis have an average of 67 MTs per kinetochore, the large number possibly the result of a permanent dicentric condition. Chloealtis has three pairs of Robertsonian fusion chromosomes which, at late meiotic metaphase I, form bivalents of 116, 134, and 152 μm (3) with an average of 67 MTs per kinetochore similar to Locusta bivalents, but with a much higher average of 42 MTs per kinetochore region. It is speculated that, in addition to mechanical demands of force, load, and viscosity, the kMT numbers are governed by cell type and evolutionary history of the karyotype in these grasshoppers.     

Stability of cumin oleoresin microencapsulated in different combination of gum arabic, maltodextrin and modified starch

Microencapsulations of cumin oleoresin by spray drying using gum arabic, maltodextrin, and modified starch (HiCap^® 100) and their ternary blends as wall materials were studied for its encapsulation efficiency and stability under storage. The microcapsules were evaluated for the content and stability of volatiles, and total cuminaldehyde, γ-terpinene and p-cymene content for six weeks. Gum arabic offered greater protection than maltodextrin and modified starch, in general, although the order of protection offered was volatiles > cuminaldehyde > p-cymene > γ-terpinene. A 4/6:1/6:1/6 blend of gum arabic/maltodextrin/modified starch offered a protection, better than gum arabic as seen from the t_1/2, i.e. time required for a constituent to reduce to 50% of its initial value. However protective effect of ternary blend was not similar for the all the constituents, and followed an order of volatiles > p-cymene > cuminaldehyde > γ-terpinene.     

Vertebrate and invertebrate carotenoid-binding proteins

In invertebrates and vertebrates, carotenoids are ubiquitous colorants, antioxidants, and provitamin A compounds that must be absorbed from dietary sources and transported to target tissues where they are taken up and stabilized to perform their physiological functions. These processes occur in a specific and regulated manner mediated by high-affinity carotenoid-binding proteins. In this mini-review, we examine the published literature on carotenoid-binding proteins in vertebrate and invertebrate systems, and we report our initial purification and characterization of a novel lutein-binding protein isolated from liver of Japanese quail (Coturnix japonica).     

Enhancement of HERG K(+) currents by Cd(2+) destabilization of the inactivated state

We have studied the functional effects of extracellular Cd(2+) on human ether-a-go-go-related gene (HERG) encoded K(+) channels. Low concentrations (10-200 &mgr;M) of extracellular Cd(2+) increased outward currents through HERG channels; 200 &mgr;M Cd(2+) more than doubled HERG currents and altered current kinetics. Cd(2+) concentrations up to 200 &mgr;M did not change the voltage dependence of channel activation, but shifted the voltage dependence of inactivation to more depolarized membrane potentials. Cd(2+) concentrations >/=500 &mgr;M shifted the voltage dependence of channel activation to more positive potentials. These results are consistent with a somewhat specific ability of Cd(2+) to destabilize the inactivated state. We tested the hypothesis that channel inactivation is essential for Cd(2+)-induced increases in HERG K(+) currents, using a double point mutation (G628C/S631C) that diminishes HERG inactivation (Smith, P. L., T. Baukrowitz, and G. Yellen. 1996. Nature (Lond.). 379:833-836). This inactivation-removed mutant is insensitive to low concentrations of Cd(2+). Thus, Cd(2+) had two distinct effects on HERG K(+) channels. Low concentrations of Cd(2+) caused relatively selective effects on inactivation, resulting in a reduction of the apparent rectification of the channel and thereby increasing HERG K(+) currents. Higher Cd(2+) concentrations affected activation gating as well, possibly by a surface charge screening mechanism or by association with a lower affinity site.     

Phosphate solubilization by stress-tolerant soil fungus <Emphasis Type="Italic">Talaromyces funiculosus</Emphasis> SLS8 isolated from the Neem rhizosphere

A promising biotechnological strategy in the management of phosphorus (P) fertilization is the use of phosphate-solubilizing fungi to solubilize rock phosphates and allow the recovery of unavailable P fixed to soil particles. Phosphate-solubilizing rhizosphere fungus, Talaromyces funiculosus SLS8, isolated from Neem (Azadirachta indica) on saline soil, was tolerant to environmental stressors, salinity and agricultural systemic fungicides. Phosphate solubilization under different nutritional conditions was investigated by culturing T. funiculosus SLS8 in Pikovskaya liquid medium containing different nitrogen sources (ammonium sulfate, casein, urea, potassium nitrate or sodium nitrate) and carbon sources (glucose, fructose, galactose or sucrose), NaCl, and three systemic fungicides. The highest concentration of solubilised phosphate (187 mg P L^?1) was achieved after 5 days of incubation in the medium with glucose and ammonium sulphate. The culture pH decreased from 6.5 to 4.2 and HPLC demonstrated organic acid production. Phosphate solubilized was highly negatively correlated with pH (r?=??0.96). Increasing salinity had no effect on phosphate solubilization. The maximum tolerance limits to systemic fungicides carbendazim, mancozeb, and hexaconazole were 12.5 μg mL^?1, 2,000 μg mL^?1 and 250 μl mL^?1 respectively. At these concentrations carbendazim, mancozeb and hexaconazole were found to decrease phosphate solubilization by 55 %, 37 %, and 30 %, respectively. Our results indicate that T. funiculosus SLS8 may be a potential candidate for the development of a biofertilizer for maintaining available phosphate levels in environmentally stressed soils such as saline agricultural soils impacted by systemic fungicide application or seed treatment.     

Synthesis and glycosidase inhibitory activity of novel (2-phenyl-4H-benzopyrimedo[2,1-b]-thiazol-4-yliden)acetonitrile derivatives

A series of (2-phenyl-4H-benzopyrimodo[2,1-b][1,3]thiazol-4-yliden-4-yliden)acetonitrile derivatives have been prepared by ring transformation reaction of 4-(methylthio)-2-oxo-6-aryl-2H-pyrane-3-carbonitriles. The yield of ring transformation product is moderate to good. Furthermore the glycosidase inhibitory activities were tested by using α-amylase and α-glucosidase pancreatic, intestinal and liver enzymes, responsible for hyperglycemia in type II diabetes. The results revealed that all compounds exhibit significant glycosidase inhibitory activity.     

Life cycle assessment in the minerals and metals sector: a critical review of selected issues and challenges

Background, aim and scope

The mining sector provides materials that are essential elements in a wide range of goods and services, which create value by meeting human needs. Mining and processing activities are an integral part of most complex material cycles so that the application of life cycle assessment (LCA) to minerals and metals has therefore gained prominence. In the past decade, increased use of LCA in the mineral and metal sector has advanced the scientific knowledge through the development of scientifically valid life cycle inventory databases. Though scientifically valid, LCA still needs to depend on several technical assumptions. In particular, measuring the environmental burden issues related to abiotic resource depletion, land use impacts and open-loop recycling within the LCA are widely debated issues. Also, incorporating spatial and temporal sensitivities in LCA, to make it a consistent scientific tool, is yet to be resolved. This article discusses existing LCA methods and proposed models on different issues in relation to minerals and metals sector.

Main features

A critical review was conducted of existing LCA methods in the minerals and metals sector in relation to allocation issues related to indicators of land use impacts, abiotic resource depletion, allocation in open-loop recycling and the system expansions and accounting of spatial and temporal dimension in LCA practice.

Results

Evolving a holistic view about these contentious issues will be presented with view for future LCA research in the minerals and metals industry. This extensive literature search uncovers many of the issues that require immediate attention from the LCA scientific community.

Discussion

The methodological drawbacks, mainly problems with inconsistencies in LCA results for the same situation under different assumptions and issues related to data quality, are considered to be the shortcomings of current LCA. In the minerals and metals sector, it is important to increase the objectivity of LCA by way of fixing those uncertainties, for example, in the LCA of the minerals and metals sector, whether the land use has to be considered in detail or at a coarse level. In regard to abiotic resource characterisation, the weighting and time scales to be considered become a very critical issue of judgement. And, in the case of open-loop recycling, which model will best satisfy all the stake holders? How the temporal and spatial dimensions should be incorporated into LCA is one of the biggest challenges ahead of all those who are concerned. Addressing these issues shall enable LCA to be used as a policy tool in environmental decision-making. There has been enormous debate with respect to on land use impacts, abiotic resource depletion, open-loop recycling and spatial and temporal dimensions, and these debates remain unresolved. Discussions aimed at bringing consensus amongst all the stake holders involved in LCA (i.e. industry, academia, consulting organisations and government) will be presented and discussed. In addition, a commentary of different points of view on these issues will be presented.

Conclusions

This review shall bring into perspective some of those contentious issues that are widely debated by many researchers. The possible future directions proposed by researchers across the globe shall be presented. Finally, authors conclude with their views on the prospects of LCA for future research endeavours.

Recommendations and outlook

Specific LCA issues of minerals and metals need to be investigated further to gain more understanding. To facilitate the future use of LCA as a policy tool in the minerals and metals sector, it is important to increase the objectivity with more scientific validity. Therefore, it is essential that the issues discussed in this paper are addressed to a great detail.