TECHNIQUES FOR MEASURING VESSEL LENGTHS AND DIAMETERS IN STEMS OF WOODY PLANTS

Results were compared between the latex paint and compressed air methods for determining total vessel lengths, and between the sectioning and maceration methods for determining vessel diameters. The minimum, mean, median, and maximum vessel diameters were less with the sectioning method than with the maceration technique. Vessel diameter distributions were always nonnormal and had roughly similar patterns with the two techniques, but were statistically different from one another. In all six species where the paint and air methods for determining vessel length were compared, both methods showed a similar skewed vessel length distribution, with many short vessels and few long ones. Although there was no consistent pattern to the difference in results with these two methods, the vessel length frequency distributions were statistically different from one another. With the paint method, many vessels, especially many of the narrowest ones, were not paint-filled at the paint infusion port. The air method utilized the paint method, in part, and, in addition, is based upon the incorrect assumption that all vessels in the stem are the same diameter. Both techniques tended to exclude vessel lengths of the narrowest vessels. However, the narrow vessels, although numerous, contributed an insignificant amount to the total theoretical hydraulic conductance in stems.     

MECHANICAL PROPERTIES WITHIN THE GROWTH ZONE OF CORN ROOTS INVESTIGATED BY BENDING EXPERIMENTS II. DISTRIBUTIONS OF MODULUS AND COMPLIANCE IN BENDING

A bending technique was used to infer the spatial distributions of rheological properties within the growth zone of the root of corn, Zea mays. “Bending modulus” (ratio of stress to strain, calculated from engineering theory of bending) falls from 20 MPa near the root tip (3 mm from the tip) to 6 MPa at the location 6 mm from the tip and then remains uniform through the basal region of the growth zone. Where growth stops, at 11–12 mm, there is a sharp rise in bending modulus. The profile of bending moduli is not changed by root incubation temperature during the growth period prior to bending, but it is shifted to the left in roots growing more slowly than the average at either of two temperatures (19 and 29 C). The spatial distribution of “compliance” (reciprocal of bending modulus and a measure of tissue extensibility) resembles the distribution of swelling in response to osmotic perturbation. The distribution of compliance does not parallel that of growth rate. Attempts to explain the discrepancy between compliance and growth rate lead us to examine the theoretical basis for the calculations and to suggest that the dependence of compliance on rate of stretching is physiologically important.     

Transformation of sensory organs by mutations of the cut locus of D. melanogaster

The identities of two types of sensory organs in the body wall of Drosophila, namely the external sensory organs and the chordotonal organs, are under genetic control. Embryonic lethal mutations in the cut gene complex transform the external sensory organs into chordotonal organs. The neurons, as well as the support cells forming the external sensory structures, change their morphological and antigenic characteristics to those of chordotonal organs, providing genetic evidence that these two types of sensory organs are homologous. Similar transformations of external sensory organs are observed in adult mosaic flies. Analysis of mosaic larvae and flies suggests that the cut gene function is required either in or near external sensory organs in order for them to acquire their correct identity.     

In vivo priming of helper and suppressor T cells by alloantigens. Frequency analysis with the use of an in vitro limiting dilution assay

Earlier studies have demonstrated that T cells activated in mixed lymphocyte reactions can exert positive as well as negative allogeneic effects on B cells expressing the appropriate alloantigens on their surface. We investigated the effect of in vivo priming of T cells with alloantigens on their capacity to help or suppress allogeneic B cell cultures against sheep erythrocytes. We used immunization protocols that have been shown to be optimal for induction of alloantigen-specific delayed-type hypersensitivity (DTH) and alloantigen-specific suppressor T (Ts) cells for DTH. The results show that in vivo stimulation with alloantigens, depending on the immunization route and the lymphoid organ studied, can be as effective as in vitro stimulation in increasing the frequency of alloantigen-specific helper T (Th) cells and Ts cells. Subcutaneous immunization induced a 10-fold frequency raise of Th cells as well as of Ts cells in the lymph nodes. In the spleen the Th cell population was hardly affected by s.c. immunization, whereas the Ts cell population increased by at least a factor 20. Intravenous immunization, on the other hand, selectively expanded the Th cell population in the spleen, whereas the splenic Ts cell population and the Th and Ts cells in the lymph nodes were not affected. Comparison of these results with our previous data concerning characteristics and the requirements of in vivo activation of alloantigen-specific DTH reactive T cells and of alloantigen-specific Ts cells suggest that different Ts cell populations are involved in suppression of alloantigen-specific DTH in vivo and of allogeneic suppression of in vitro induced sheep erythrocytes specific antibody formation.     

Dominant expression of an amino-acid uptake deficiency in carrot somatic fusion hybrids

Somatic hybrids were selected previously by their ability to grow in medium containing normally inhibitory levels of the two amino acid analogs aminoethylcysteine (AEC) and 5-methyltryptophan (5MT) following fusion of protoplasts from a cell strain resistant to AEC with protoplasts resistant to 5MT. The hybrid nature of the selected clones was shown by several criteria including the presence of another resistance, azetidine-2-carboxylate (A2C), carried by one of the parental strains which was not selected for in the initial hybrid selection scheme. The characterization presented here shows that the AEC resistance in the parental strain, as well as the two somatic hybrids, was due to decreased AEC uptake. Also the 5MT resistance in the hybrids, as in the parent was caused by a feedback altered form of the tryptophan biosynthetic control enzyme, anthranilate synthase which leads to increases in free tryptophan. The A2C resistance was caused by the accumulation of free proline by a mechanism which has not been studied. These studies confirm that AEC resistance caused by decreased uptake can be expressed dominantly in protoplast fusion hybrids.Abbreviations A2C Azetidine-2-carboxylate - AEC Aminoethylcysteine - 5MT 5-methyltryptophan     

Influence of Nitrogen Fertilizers on Growth, Spore Production and Germination, and Biocontrol Potential of Trichoderma and Gliocladium

The mycelial weight of eight out of nine isolates of Trichoderma spp. and Gliocladium virens increased in media supplemented with 2000 mg/l of nitrogen (N) from the fertilizers NH₄Cl, NaNO₃, and a commercial 20–20–20. In general, the greatest increase in growth (up to 311 %) occurred with 20–20–20. The extent of growth was similar with either NH₄Cl or NaNO₃, but was less than that with 20–20–20. Measured by radial development on agar surfacesgrowth of isolates was either not affected or was constricted by supplemental fertilizers. Production of conidia by six out of eight isolates was stimulated by 20–20–20 but not by NH₄Cl or NaNO₃. Germination of conidia of all isolates, generally was high (> 85 %) on amended and nonamended agar. Chlamydospore formation by three Trichoderma isolates in liquid media was not affected by fertilizers. Antagonism or overgrowth of the pathogen Rhizoctonia solani by Trichoderma isolates in culture was reduced appreciably by NaNO₃, but was not affected by NH₄Cl or 20–20–20. Addition of 20–20–20 to natural soil did not reduce further the survival of R. solani caused by germling preparations of six out of seven Trichoderma isolates. However, reduction in survival of the pathogen caused by a T. hamatum isolate was stimulated further (45 %) by the fertilizer.     

中国长臂猿的分布(英文)

中国南部分布着3种长臂猿,它们是白眉长臂猿(Hylobates hoolock)、白掌长臂猿(H.lar)和黑冠长臂猿(H.concolor)。黑冠长臂猿在我国境内有3个亚种:指名亚种(H.c.concolor),白颊亚种(H.c.leucogenys)和海南亚种(H.c.hainanus)。这些种类目前只分布在云南和广东的海南岛,但在五十年代初也生活在广西的西南部。这些地区是长臂猿属分布区的东北边界。 同它们在中南半岛的地理特征相一致,中国的3种长臂猿的分布区不相重迭,以两条大江为界。白眉长臂猿栖居在云南怒江以西,白掌长臂猿生活在怒江与澜沧江之间地带,黑冠长臂猿占据澜沧江以东。但是有一处,即黑冠长臂猿的云南保山瓦窑分布点例外,该地的标本收藏在动物研究所。 对于黑冠长臂猿海南亚种的文献记述存在不确切之处。现有较多的标本表明,海南亚种的雌性个体头冠部具有界限明显的黑色大斑块;成年雌性个体背毛呈浅棕灰色或较鲜亮的赭黄色;背中部毛较长,在40—75毫米之间。 我们所研究的标本收藏在以下单位:纽约美国自然历史博物馆,北京自然博物馆,芝加哥福地自然历史博物馆,复旦大学生物系,中国科学院动物研究所,广州华南濒危动物研究所,上海自然博物馆,上海动物园(活体),中山大学生物系。     

Mobilization ofEscherichia coli R1 silver-resistance plasmid pJT1 by Tn5-Mob intoEscherichia coli C600

Summary Escherichia coli Rl is an Ag⁺-resistant strain that, as we have shown recently, harbours at least two large plasmids, pJT1 (83 kb) and pJT2 (77 kb). Tn5-Mob was introduced into theE. coli Rl host replicon via conjugation on membrane filters. The transfer functions of plasmid RP4-4 were provided in this process and Tn5-Mob clones mated withE. coli C600 yielded Ag⁺-resistant transconjugants. This mobilization procedure allowed transfer and expression of pJT1 Ag⁺ resistance inE. coli C600. Prior to use of Tn5-Mob mobilization, it was not possible to transfer Ag⁺-resistant determinant(s) intoE. coli by conjugation or transformation including high-voltage electroporation.E. coli C600 containing PJTI and PJT2 displayed decreased accumulation of Ag⁺ similar toE. coli R1.E. coli C600 could not tolerate 0.1 and 0.5 mM Ag⁺, rapidly accumulated Ag⁺ and became non-viable. Tn5-Mob mobilization may be useful in the study of metal resistance in bacteria, especially in strains not studied for resistance mechanisms.