Planar microfluidic chamber for generation of stable and steep chemoattractant gradients

The extracellular availability of growth factors, hormones, chemokines, and neurotransmitters under gradient conditions is required for directional cellular responses such as migration, axonal pathfinding, and tissue patterning. These responses are, in turn, important in disease and developmental processes. This article addresses critical barriers toward devising a chemotaxis assay that is broadly applicable for different kinds of cancer cells through the design of a microfluidic chamber that produces a steep gradient of chemoattractant. Photolithography was used to create microchannels for chemoattractant delivery, flow diversion barriers/conduits, and small outlets in the form of apertures. The 1-μm apertures were made at the active surface by uncapping a thin (1.5 μm) layer of AZ1518. This process also created a vertical conduit that diverted the flow such that it occurred perpendicularly to the active, experimental surface where the gradients were measured. The other side of the vertical conduit opened to underlying 20-μm deep channels that carried microfluidic flows of tracer dyes/growth factors. Modeled data using computational fluid dynamics produced gradients that were steep along the horizontal, active surface. This simulation mirrors empirically derived gradients obtained from the flow analyses of fluorescent compounds. The open chamber contains a large buffer volume, which prevents chemoattractant saturation and permits easy cell and compound manipulation. The technique obviates the use of membranes or laminar flow that may hinder imaging, rinsing steps, cell seeding, and treatment. The utility of the chamber in the study of cell protrusion, an early step during chemotaxis, was demonstrated by growing cancer cells in the chamber, inducing a chemoattractant gradient using compressed air at 0.7 bar, and performing time-lapse microscopy. Breast cancer cells responded to the rapidly developed and stable gradient of epidermal growth factor by directing centroid positions toward the gradient and by forming a leading edge at a speed of 0.45 μm/min.     

A validated model of passive skeletal muscle to predict force and intramuscular pressure

The passive properties of skeletal muscle are often overlooked in muscle studies, yet they play a key role in tissue function in vivo. Studies analyzing and modeling muscle passive properties, while not uncommon, have never investigated the role of fluid content within the tissue. Additionally, intramuscular pressure (IMP) has been shown to correlate with muscle force in vivo and could be used to predict muscle force in the clinic. In this study, a novel model of skeletal muscle was developed and validated to predict both muscle stress and IMP under passive conditions for the New Zealand White Rabbit tibialis anterior. This model is the first to include fluid content within the tissue and uses whole muscle geometry. A nonlinear optimization scheme was highly effective at fitting model stress output to experimental stress data (normalized mean square error or NMSE fit value of 0.993) and validation showed very good agreement to experimental data (NMSE fit values of 0.955 and 0.860 for IMP and stress, respectively). While future work to include muscle activation would broaden the physiological application of this model, the passive implementation could be used to guide surgeries where passive muscle is stretched.     

Biotic and Abiotic Drivers of Peatland Growth and Microtopography: A Model Demonstration

Peatlands are important carbon reserves in terrestrial ecosystems. The microtopography of a peatland area has a strong influence on its carbon balance, determining carbon fluxes at a range of spatial scales. These patterned surfaces are very sensitive to changing climatic conditions. There are open research questions concerning the stability, behaviour and transformation of these microstructures, and the implications of these changes for the long-term accumulation of organic matter in peatlands. A simple two-dimensional peat microtopographical model was developed, which accounts for the effects of microtopographical variations and a dynamic water table on competitive interactions between peat-forming plants. In a case study of a subarctic mire in northern Sweden, we examined the consequences of such interactions on peat accumulation patterns and the transformation of microtopographical structure. The simulations demonstrate plausible interactions between peatland growth, water table position and microtopography, consistent with many observational studies, including an observed peat age profile from the study area. Our model also suggests that peatlands could exhibit alternative compositional and structural dynamics depending on the initial topographical and climatic conditions, and plant characteristics. Our model approach represents a step towards improved representation of peatland vegetation dynamics and net carbon balance in Earth system models, allowing their potentially important implications for regional and global carbon balances and biogeochemical and biophysical feedbacks to the atmosphere to be explored and quantified.     

MEPE-Derived ASARM Peptide Inhibits Odontogenic Differentiation of Dental Pulp Stem Cells and Impairs Mineralization in Tooth Models of X-Linked Hypophosphatemia

Mutations in PHEX (phosphate-regulating gene with homologies to endopeptidases on the X-chromosome) cause X-linked familial hypophosphatemic rickets (XLH), a disorder having severe bone and tooth dentin mineralization defects. The absence of functional PHEX leads to abnormal accumulation of ASARM (acidic serine- and aspartate-rich motif) peptide − a substrate for PHEX and a strong inhibitor of mineralization − derived from MEPE (matrix extracellular phosphoglycoprotein) and other matrix proteins. MEPE-derived ASARM peptide accumulates in tooth dentin of XLH patients where it may impair dentinogenesis. Here, we investigated the effects of ASARM peptides in vitro and in vivo on odontoblast differentiation and matrix mineralization. Dental pulp stem cells from human exfoliated deciduous teeth (SHEDs) were seeded into a 3D collagen scaffold, and induced towards odontogenic differentiation. Cultures were treated with synthetic ASARM peptides (phosphorylated and nonphosphorylated) derived from the human MEPE sequence. Phosphorylated ASARM peptide inhibited SHED differentiation in vitro, with no mineralized nodule formation, decreased odontoblast marker expression, and upregulated MEPE expression. Phosphorylated ASARM peptide implanted in a rat molar pulp injury model impaired reparative dentin formation and mineralization, with increased MEPE immunohistochemical staining. In conclusion, using complementary models to study tooth dentin defects observed in XLH, we demonstrate that the MEPE-derived ASARM peptide inhibits both odontogenic differentiation and matrix mineralization, while increasing MEPE expression. These results contribute to a partial mechanistic explanation of XLH pathogenesis: direct inhibition of mineralization by ASARM peptide leads to the mineralization defects in XLH teeth. This process appears to be positively reinforced by the increased MEPE expression induced by ASARM. The MEPE-ASARM system can therefore be considered as a potential therapeutic target.     

Effect of dose schedule of vitamin E and hydroxethylruticide on intestinal toxicity induced by adriamycin

CDF1 mice receiving Adriamycin, 12 mg/kg IP develop a toxic GI mucositis. The mean survival in CDF1 mice after Adriamycin injection was found to be 6.5 +/- 2.0 weeks and could be increased by alcohol or acetate Vitamin E pretreatment (with 2 g/kg qDx7d) to 22.06 +/- 12.3 weeks or by treatment with Venoruton after Adriamycin (qDx7 with 1.5 g/kg) to 23.7 +/- 12.7 weeks. Other schedules were ineffective or harmful. The ability of Venoruton to enhance survival when given after Adriamycin encouraged us to proceed to tumor bearing mice. The maximum survival with CDF1 mice bearing 5 X 10(6) L1210 cells was 1 +/- 0.2 week which could be increased to 2.17 +/- 0.8 weeks with optimal dose Adriamycin (10 mg/kg). Optimum survival with Venoruton and a single dose of Adriamycin was 2.45 +/- 0.91 weeks with Venoruton, 1.5 g, qd X 14, and 12 mg/kg Adriamycin. Treatment of L1210 bearing mice with Adriamycin, 10 mg/kg on days 1 and 8, yielded a survival of 2.23 +/- 0.7 weeks. An equitoxic regimen of Adriamycin, 11 mg/kg on days 1 and 9, plus Venoruton, 1.5 g, qd X 14, increased survival 30% to 3.08 +/- 2.9 weeks. Venoruton is a promising agent to increase the therapeutic index of Adriamycin.     

Intraocular iron injection induces oxidative stress followed by elements of geographic atrophy and sympathetic ophthalmia

Iron has been implicated in the pathogenesis of age‐related retinal diseases, including age‐related macular degeneration (AMD). Previous work showed that intravitreal (IVT) injection of iron induces acute photoreceptor death, lipid peroxidation, and autofluorescence (AF). Herein, we extend this work, finding surprising chronic features of the model: geographic atrophy and sympathetic ophthalmia. We provide new mechanistic insights derived from focal AF in the photoreceptors, quantification of bisretinoids, and localization of carboxyethyl pyrrole, an oxidized adduct of docosahexaenoic acid associated with AMD. In mice given IVT ferric ammonium citrate (FAC), RPE died in patches that slowly expanded at their borders, like human geographic atrophy. There was green AF in the photoreceptor ellipsoid, a mitochondria‐rich region, 4 h after injection, followed later by gold AF in rod outer segments, RPE and subretinal myeloid cells. The green AF signature is consistent with flavin adenine dinucleotide, while measured increases in the bisretinoid all‐trans‐retinal dimer are consistent with the gold AF. FAC induced formation carboxyethyl pyrrole accumulation first in photoreceptors, then in RPE and myeloid cells. Quantitative PCR on neural retina and RPE indicated antioxidant upregulation and inflammation. Unexpectedly, reminiscent of sympathetic ophthalmia, autofluorescent myeloid cells containing abundant iron infiltrated the saline‐injected fellow eyes only if the contralateral eye had received IVT FAC. These findings provide mechanistic insights into the potential toxicity caused by AMD‐associated retinal iron accumulation. The mouse model will be useful for testing antioxidants, iron chelators, ferroptosis inhibitors, anti‐inflammatory medications, and choroidal neovascularization inhibitors.     

Solid-state NMR [13C,15N] resonance assignments of the nucleotide-binding domain of a bacterial cyclic nucleotide-gated channel

Channels regulated by cyclic nucleotides are key signalling proteins in several biological pathways. The regulatory aspect is conferred by a C-terminal cyclic nucleotide-binding domain (CNBD). We report resonance assignments of the CNBD of a bacterial mlCNG channel obtained using 2D and 3D solid-state NMR under Magic-angle Spinning conditions. A secondary chemical shift analysis of the 141 residue protein suggests a three-dimensional fold seen in earlier X-ray and solution-state NMR work and points to spectroscopic polymorphism for a selected set of resonances.     

Single-dose murine monoclonal antibody ricin A chain immunotoxin in the treatment of metastatic melanoma: a phase I trial.

To determine the maximally tolerated dose of a ricin A chain-conjugated antimelanoma antibody (XomaZyme-Mel), 20 patients with metastatic melanoma were treated with escalating doses of the murine immunotoxin given as single intravenous infusion over 30 minutes. The starting dose was 0.6 mg/kg and was escalated in five groups to a maximum of 1.6 mg/kg. The maximally tolerated dose was 1.25 mg/kg as three of six patients treated at 1.6 mg/kg developed unacceptable toxicity. The dose-limiting toxicity consisted of profound fatigue, myalgias, and arthralgias. These occurred within 4 days and resolved in 7 to 10 days. Other non-dose-limiting toxicities encountered consisted of hypoalbuminemia, weight gain, peripheral edema, mild hypotension, and flu-like syndrome; the severity of these was also dose related. In addition, two allergic reactions occurred, one severe. There was one durable complete response of 12+ months' duration and one brief mixed response lasting 3 months. We conclude that the maximum tolerated single dose of XomaZyme-Mel is 1.25 mg/kg. Phase I studies evaluating 1.25 mg/kg given in multiple doses at 2- to 4-week intervals and phase II studies to determine the response rate of a single 1.25 mg/kg dose are warranted.