The structural basis of receptor-binding by Escherichia coli associated with diarrhea and septicemia

GafD in Escherichia coli G (F17) fimbriae is associated with diarrheal disease, and the structure of the ligand-binding domain, GafD1-178, has been determined at 1.7A resolution in the presence of the receptor sugar N-acetyl-D-glucosamine. The overall fold is a beta-barrel jelly-roll fold. The ligand-binding site was identified and localized to the side of the molecule. Receptor binding is mediated by side-chain as well main-chain interactions. Ala43-Asn44, Ser116-Thr117 form the sugar acetamide specificity pocket, while Asp88 confers tight binding and Trp109 appears to position the ligand. There is a disulfide bond that rigidifies the acetamide specificity pocket. The three fimbrial lectins, GafD, FimH and PapG share similar beta-barrel folds but display different ligand-binding regions and disulfide-bond patterns. We suggest an evolutionary path for the evolution of the very diverse fimbrial lectins from a common ancestral fold.     

Leaf biomechanics, morphology, and anatomy of the deciduous mesophyte Prunus serrulata (Rosaceae) and the evergreen sclerophyllous shrub Heteromeles arbutifolia (Rosaceae)

Leaf tensile properties were compared between the mesic deciduous tree Prunus serrulata (var. "Kwanzan") and the xeric and sclerophyllous chaparral evergreen shrub Heteromeles arbutifolia (M. Roem). All values for biomechanical parameters for H. arbutifolia were significantly greater than those of P. serrulata. The fracture planes also differed between the two species with P. serrulata fracturing along the secondary veins, while H. arbutifolia most often fractured across the leaf irrespective of the vein or mesophyll position, thus yielding qualitative differences in the stress-strain curves of the two species. Anatomically, P. serrulata exhibits features typical for a deciduous mesophytic leaf such as a thin cuticle, a single layer of palisade mesophyll, isodiametric spongy mesophyll, and extensive reticulation of the laminar veins. Heteromeles arbutifolia leaves, however, are typically two- to three-fold thicker with a 35% higher dry mass/fresh mass ratio. The vascular tissue is restricted to the interface of the palisade and spongy mesophyll near the center of the leaf. Both epidermal layers have a thick cuticle. The palisade mesophyll is tightly packed and two to three layers thick. The spongy mesophyll cells are ameboid in shape and tightly interlinked both to other spongy cells as well as to the overlying palisade layer. We conclude that the qualitative and quantitative biomechanical differences between the leaves of these two species are likely due to a complex interaction of internal architectural arrangement and the physical/chemical differences in the properties of their respective cell walls. These studies illustrate the importance that morphological and anatomical correlates play with mechanical behavior in plant material and ultimately reflect adaptations present in the leaves of chaparral shrubs that are conducive to surviving in arid environments.     

An outcome study comparing intravenous sedation with midazolam/fentanyl (conscious sedation) versus propofol infusion (deep sedation) for aesthetic surgery

The purpose of this study was to determine the differences in measurable outcomes following aesthetic procedures performed under intravenous sedation with incremental doses of midazolam and fentanyl and those performed under propofol infusion. The authors' hypothesis was that the differences in these outcome parameters are not significant between these intravenous sedation protocols. All intraoperative and perioperative records of 84 consecutive patients having aesthetic surgery under a conscious sedation protocol using incremental doses of intravenous midazolam and fentanyl were retrospectively reviewed and compared with the records of a second group of 85 patients having aesthetic surgery under a deep sedation regimen based primarily on propofol infusion. All procedures were hospital based and performed by two surgeons. Twenty-eight different parameters were examined by chart review. In addition, a patient questionnaire was used to assess patient satisfaction and patient recall of operative and perioperative pain, anxiety, nausea, and vomiting. Multivariate statistical analysis was conducted. The two sedation groups were similar with regard to aesthetic procedures performed and patient demographics. The mean duration of operative time was statistically equivalent (152 minutes and 153 minutes). In both groups, there were minor adverse intraoperative events reported but no significant complications. Transient hypotension was more common in the propofol infusion group (12.9 percent versus 2.4 percent, p = 0.018), but no patient required intervention beyond reducing the sedative agent or increasing intravenous fluids. The amount of supplemental fentanyl given intraoperatively was significantly higher in the group whose primary agent for sedation was propofol infusion than the group who received midazolam/fentanyl (209 mug and 143 mug, respectively). The overall questionnaire response rate was 80 percent for both groups. The midazolam/fentanyl sedation group had more recall of "unpleasant intraoperative events" (17 percent versus 3 percent, p = 0.007). However, both groups had low recall of intraoperative pain, anxiety, and nausea. The propofol infusion group experienced significantly more nausea in the recovery room (p = 0.002), nausea at the time of discharge (p = 0.009), and nausea the evening after the operation (p = 0.013). Greater than 90 percent of the patients in both groups would have the same anesthetic in the future rather than undergo general anesthesia. Patient safety, outcomes, and satisfaction are similar in plastic surgery procedures performed under sedation protocols using either incremental doses of midazolam and fentanyl or propofol infusion. All operative and postoperative outcomes for pain, anxiety, and vomiting were similar in the two groups except for immediate postoperative nausea, which was higher in the propofol infusion group. The overall satisfaction of patients undergoing plastic surgery procedures under these intravenous sedation protocols appears very high.     

Characterization of oligonucleotide/lipid interactions in submicron cationic emulsions: influence of the cationic lipid structure and the presence of PEG-lipids

We have recently described how oligonucleotide (ON) stability and release from O/W cationic emulsions are governed by the lipid composition. The aim of the present paper was to investigate the properties of the ON/lipid complexes through fluorescence resonance energy transfer (FRET), size, surface tension measurements and cryomicroscopy. Starting from a typical emulsion containing stearylamine as a cationic lipid, the influence of the lipid structure (monocationic molecules bearing mono or diacyl chains, or polycations) as well as of the presence of PEGylated lipids, were studied. The presence of a positive charge on the droplet surface clearly contributed to enhance the ON interaction with lipid monolayers and to bring the ON molecules closer to the interface. Hydrophobic interactions through the acyl chains were shown to further enhance the anchorage of the ON/lipid complexes. In contrast, the incorporation of PEGylated lipids acted as a barrier against the establishment of electrostatic bindings, the polyethyleneglycol chains acting themselves as interaction sites for the ON leading to hydrophilic complexes. Similar features were observed for the polycationic lipid, and cryomicroscopy revealed the existence of bridges of various intensities between the droplets of the emulsion containing either PEG or the polycation, probably because of the configuration of the ON at the interface.     

Exclusion of vanA, vanB and vanC type glycopeptide resistance in strains of Lactobacillus reuteri and Lactobacillus rhamnosus used as probiotics by polymerase chain reaction and hybridization methods

Strains of Lactobacillus reuteri and Lact. rhamnosus are used as probiotics in man and animal. The aim of this study was to determine whether the glycopeptide resistance in these lactobacilli has a similar genetic basis as in enterococci. Five Lact. reuteri strains and one Lact. rhamnosus, as well as four Enterococcus control strains, were probed for the vanA gene cluster, the vanB gene and the vanC gene by PCR and Southern hybridization, and DNA/DNA hybridization. Their resistance and plasmid patterns were also investigated. All Lactobacillus strains were resistant to vancomycin but susceptible to a broad range of antibiotics. Four of the Lactobacillus strains (including the Lact. rhamnosus strain) did not harbour any plasmid and two of them contained five and 6 plasmid bands respectively. None of the Lactobacillus strains possessed the vanA, vanB or vanC gene. These findings indicate that the glycopeptide resistance of the Lactobacillus strains analysed is different from the enterococcal type. The study provides reassurance on the safety of the Lactobacillus strains used as probiotics with regard to their vancomycin resistance.     

Xanthan gum: production, recovery, and properties

Xanthan gum is a microbial polysaccharide of great commercial significance. This review focuses on various aspects of xanthan production, including the producing organism Xanthomonas campestris, the kinetics of growth and production, the downstream recovery of the polysaccharide, and the solution properties of xanthan.     

Xanthan gum production under several operational conditions: molecular structure and rheological properties*

Xanthan gum production under several operational conditions has been studied. Temperature, initial nitrogen concentration and oxygen mass transfer rate have been changed and average molecular weight, pyruvilation and acetylation degree of xanthan produced have been measured in order to know the influence of these variables on the synthesised xanthan molecular structure. Also, xanthan gum solution viscosity has been measured, and rheological properties of the solutions have been related to molecular structure and operational conditions. The Casson model has been employed to describe the rheological behaviour. The parameter values of the Casson model, tau(0) and K(c), have been obtained for each polysaccharide synthesised under different operational conditions. Both pyruvilation and acetylation degrees and average molecular weight of xanthan increase with fermentation time at any operating conditions. Xanthan molecules with the highest average molecular weight have been obtained at 25 degrees C. Nevertheless, at this temperature acetate and pyruvate radical concentration are lowest. Nitrogen concentration in broth does not show any clear influence over xanthan average molecular weight, although with high nitrogen source concentration xanthan with low pyruvilation degree is produced.