meoA is the structural gene for outer membrane protein c of Escherichia coli K12

Summary The isolation and characterization of two mutants of Escherichia coli K12 with an altered outer membrane protein c is described. The first mutant, strain CE1151, was isolated as a bacteriophage Mel resistant strain which contains normal levels of protein c. Mutant cells adsorbed the phage with a strongly decreased rate. Complexes of purified nonheat modified wild type protein c and wild type lipopolysaccharide inactivated phage Me1, indicating that these components are required for receptor activity for phage Me1. When wild type protein c was replaced by protein c of strain CE1151, the receptorcomplex was far less active, showing that protein c of strain CE1151 is altered. The second mutant produces a protein c with a decreased electrophoretic mobility, designated as protein c^*. An altered apparent molecular weight was also observed for one or more fragments obtained after fragmentation of the mutant protein with cyanogen bromide, trypsin and chymotrypsin. Alteration of protein c was not accompanied by a detectable alteration in protein b or its fragments. Both mutations are located at minute 48 of the Escherichia coli K12 linkage map. The results strongly suggest that meoA is the structural gene for protein c.     

Characterization and determination of neuropeptides by high-performance liquid chromatography and radioimmunoassay

A method is described for the separation and analysis of a variety of neuropeptides using reversed-phase high-performance liquid chromatography coupled with radioimmunoassay. The solvent system (an acetonitrile gradient containing 0.08% trifluoroacetic acid) allows UV detection at 206 nm, gives good resolution and, by being volatile, is readily compatible with radioimmunoassay. Three applications of the method are described: (a) thyrotropin releasing hormone immunoreactivity in the rat brain has been characterized; (b) ACTH immunoreactivity in the rat pituitary pars intermedia has been resolved into its component peptides; (c) degradation of luteinizing hormone releasing hormone in vitro has been followed.     

Architecture of the Outer Membrane of Escherichia coli III. Protein-Lipopolysaccharide Complexes in Intramembraneous Particles

In a previous paper (A. Verkleij, L. van Alphen, J. Bijvelt, and B. Lugtenberg, Biochim. Biophys. Acta 466:269-282, 1977) we have hypothesized that particles on the outer fracture face of the outer membrane ([Formula: see text]), with corresponding pits on the inner fracture face of the outer membrane ([Formula: see text]), consist of lipopolysaccharide (LPS) aggregates stabilized by divalent cations and that they might contain protein and/or phospholipid. In the present paper the roles of LPS, cations, and proteins in these [Formula: see text] particles are described more extensively, using a strain that lacks the major outer membrane proteins, b, c, and d (b(-) c(-) d(-)), and has a reduction in the number of [Formula: see text] particles of 75%. To study the role of divalent cations in the formation of [Formula: see text] particles, these b(-) c(-) d(-) cells were grown or incubated with Ca(2+), Mg(2+), or putrescine. The presence of Ca(2+) resulted in the appearance of many [Formula: see text] particles and [Formula: see text] pits. Mg(2+) and putrescine were less effective than Ca(2+). Introduction of these particles was not accompanied by alterations in the relative amounts of LPS and cell envelope proteins. Ca(2+) treatment of a heptoseless derivative of a b(-) c(-) d(-) strain did not result in morphological changes. Incubation of Ca(2+)-treated cells with ethylenediaminetetraacetate caused the disappearance of the introduced particles as well as the release of more than 60% of the cellular LPS. These results strongly support the hypothesis that LPS is involved in the formation of [Formula: see text] particles and [Formula: see text] pits. The roles of various outer membrane proteins in the formation of [Formula: see text] particles were studied by comparing the freeze-fracture morphology of b(-) c(-) d(-) cells with that of cells which contain one of the outer membrane proteins b, c, d, and e or the receptor protein for bacteriophage lambda. The results showed that the presence of any of these five proteins in a b(-) c(-) d(-) background resulted in a large increase in the number of [Formula: see text] particles and [Formula: see text] pits, indicating that these proteins are, independent of each other, involved in the formation of [Formula: see text] particles and [Formula: see text] pits. The simplest explanation for the results is that in wild-type cells each particle consists of LPS complexed with some molecules of a single protein species, stabilized by either divalent cations or polyamines. It is hypothesized that the outer membrane of the wild-type cell contains a heterogeneous population of particles, of which 75% consists of protein b-LPS, protein c-LPS, and protein d-LPS particles. A function of these particles as aqueous pores is proposed.     

The two-step interaction between α-dimethylaminonaphthalene-1-sulfonyl-pepsinogen-(1–12) and pepsin

The binding between α-dimethylaminonaphthalenesulfonyl-(1–12) and porcine pepsin can be detected by the large changes that occur in the fluorescence spectra of the dimethylaminonaphthalenesulfonyl chromophore due to energy transfer from tryptophan residues of the protein. The interaction was previously shown to consist of two steps: a fast step leading to a greatly enhanced fluorescence followed by a slower rearrangement step which reduces the fluorescence but leads to tighter binding and inhibition of the catalytic activity of pepsin (1). The two steps have been studied over a wide range of values of pH, temperature, and ionic strength to gain additional insights into the physical events occurring during the interaction. Based on the pH and ionic strength dependence, the initial step most likely involves electrostatic interaction of the basic peptide inhibitor with the acidic surface of pepsin in a rapid collision process. The use of this fluorescent reporter group has also suggested that the equilibrium binding after the slower rearrangement may also be pH dependent with most effective binding at higher pH. The kinetics of the slow step were measured by monitoring the continuous fluorescence decay. The resulting rates are compared to the rates observed by others for binding of pepstatin to pepsin. From the pH dependence of fluorescence, pK_app values are obtained for the dansylated peptide (3.25), for the pH dependence of the initial binding step (4.87), and for the equilibrium position (4.75).     

The recombination activating genes,RAG 1 and RAG 2, are on chromosome 11p in humans and chromosome 2p in mice

The recombination activating genes RAG-1 and RAG-2 are adjacent genes that act synergistically to activate variable-diversity-joining (V(D)J) recombination. Southern analysis of hybrid cell lines derived from patients with the Wilms tumor-aniridia-genitourinary defects-mental retardation (WAGR) syndrome and from mutagenized cell hybrids selected for deletions in chromosome 11 has allowed us to map the chromosomal location of the human RAG locus. The RAG locus defines a new interval of human chromosome 11p, but is not associated with any genetically mapped human disease. Guided by the chromosomal localization of the human recombination activating genes, we have also mapped the location of the mouse Rag locus.     

Use of Bioluminescence Markers To Detect Pseudomonas spp. in the Rhizosphere

The use of bioluminescence as a sensitive marker for detection of Pseudomonas spp. in the rhizosphere was investigated. Continuous expression of the luxCDABE genes, required for bioluminescence, was not detectable in the rhizosphere. However, when either a naphthalene-inducible luxCDABE construct or a constitutive luxAB construct (coding only for the luciferase) was introduced into the Pseudomonas cells, light emission could be initiated just prior to measurement by the addition of naphthalene or the substrate for luciferase, n-decyl aldehyde, respectively. These Pseudomonas cells could successfully be detected in the rhizosphere by using autophotography or optical fiber light measurement techniques. Detection required the presence of 10³ to 10⁴ CFU/cm of root, showing that the bioluminescence technique is at least 1,000-fold more sensitive than β-galactosidase-based systems.     

Photooxidation of specific residues in alpha-crystallin polypeptides

Singlet oxygen is a biologically important, photochemically generated species that preferentially oxidizes His, Trp, and Met residues of protein molecules. Calf alpha-crystallin was photooxidized with use of meso-tetra(p-sulfonatophenyl)porphyrin (TPPS) and uroporphyrin (UP) as singlet oxygen generators. The effects of photooxidation were monitored by analyzing the changes in alpha-crystallin peptide maps obtained by reversed-phase HPLC using a photodiode array absorbance detector. The reaction led to the loss of six specific peptides, five of which contained photooxidizable residues. Peptides containing His-97 and His-154 from the A chain and Met-68 from the B chain are preferentially photooxidized, suggesting that those residues have access to singlet oxygen. Trp residues in the N-terminal region are converted to NFK, whereas Trp-60 in the B chain is not photooxidized strongly suggesting that the former are close to the surface of alpha-crystallin while the latter Trp residue is buried. Only one peptide that is lost from the peptide maps does not contain a photooxidizable group; however, this peptide does contain an apparently undigested Lys residue. It is suggested that it forms a cross-link with a photooxidized His residue.     

The S3 state of photosystem II: differences between the structure of the manganese complex in the S2 and S3 states determined by X-ray absorption spectroscopy

O2-evolving photosystem II (PSII) membranes from spinach have been cryogenically stabilized in the S3 state of the oxygen-evolving complex. The cryogenic trapping of the S3 state was achieved using a double-turnover illumination of dark-adapted PSII preparations maintained at 240 K. A double turnover of PSII was accomplished using the high-potential acceptor, Q400, which is the high-spin iron of the iron-quinone acceptor complex. EPR spectroscopy was the principal tool establishing the S-state composition and defining the electron-transfer events associated with a double turnover of PSII. The inflection point energy of the Mn X-ray absorption K-edge of PSII preparations poised in the S3 state is the same as for those poised in the S2 state. This is surprising in light of the loss of the multiline EPR signal upon advancing to the S3 state. This indicates that the oxidative equivalent stored within the oxygen-evolving complex (OEC) during this transition resides on another intermediate donor which must be very close to the manganese complex. An analysis of the Mn extended X-ray absorption fine structure (EXAFS) of PSII preparations poised in the S2 and S3 states indicates that a small structural rearrangement occurs during this photoinduced transition. A detailed comparison of the Mn EXAFS of these two S states with the EXAFS of four multinuclear mu-oxo-bridged manganese compounds indicates that the photosynthetic manganese site most probably consists of a pair of binuclear di-mu-oxo-bridged manganese structures. However, we cannot rule out, on the basis of the EXAFS analysis alone, a complex containing a mononuclear center and a linear trinuclear complex. The subtle differences observed between the S states are best explained by an increase in the spread of Mn-Mn distances occurring during the S2----S3 state transition. This increased disorder in the manganese distances suggests the presence of two inequivalent di-mu-oxo-bridged binuclear structures in the S3 state.