Chemical Composition and Antimicrobial Activity of the Essential Oil from the Edible Aromatic Plant Aristolochia delavayi

The essential oil obtained by hydrodistillation from the aerial parts of Aristolochia delavayi Franch. (Aristolochiaceae), a unique edible aromatic plant consumed by the Nakhi (Naxi) people in Yunnan, China, was investigated using GC/MS analysis. In total, 95 components, representing more than 95% of the oil composition, were identified, and the main constituents found were (E)‐dec‐2‐enal (52.0%), (E)‐dodec‐2‐enal (6.8%), dodecanal (3.35%), heptanal (2.88%), and decanal (2.63%). The essential oil showed strong inhibitory activity (96% reduction) of the production of bacterial volatile sulfide compounds (VSC) by Klebsiella pneumoniae, an effect that was comparable with that of the reference compound citral (91% reduction). Moreover, the antimicrobial activity of the essential oil and the isolated major compound against eight bacterial and six fungal strains were evaluated. The essential oil showed significant antibacterial activity against Providencia stuartii and Escherichia coli, with minimal inhibitory concentrations (MIC) ranging from 3.9 to 62.5 μg/ml. The oil also showed strong inhibitory activity against the fungal strains Trichophyton ajelloi, Trichophyton terrestre, Candida glabrata, Candida guilliermondii, and Cryptococcus neoformans, with MIC values ranging from 3.9 to 31.25 μg/ml, while (E)‐dec‐2‐enal presented a lower antifungal activity than the essential oil.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

Evidence of heterogeneous selection on quantitative traits of Prosopis flexuosa (Leguminosae) from multivariate Q ST –F ST test

Prosopis flexuosa is an arboreal Leguminosae that grows in arid and semiarid temperate zones of Argentina, in the Monte eco-region. It is a promising native forest species for recovering arid and semiarid regions because it plays an important role in erosion control as well as in soil fertility. Furthermore, it provides diverse economical resources. The main challenge to the forestry sector is finding a balance between production and forest protection. For this purpose, it is necessary to gather information about genetic parameters. In this study, we measured the distribution of the variation of 14 quantitative traits in an experimental half-sib stand, where families are representative of hierarchically structured populations. We applied a multivariate extension of the classical Q _ST –F _ST neutrality test to determine the relative importance of drift versus selection in the distribution of genetic variability. We found strong evidence that different selective regimes act on different traits and that selection favors different optima in each sampling site. The selection to different optima is much stronger among than within provenances. This result helps explain the possible causes for the regional variation observed in P. flexuosa and to define the management units and the evolutionarily significant units for this species.     

Naphtho‐γ‐pyrones from Endophyte Aspergillus niger Occurring in the Liverwort Heteroscyphus tener (Steph.) Schiffn.

Bioactivity‐guided fractionation of the cytotoxic extract of Aspergillus niger, an endophytic fungus from the Chinese liverwort Heteroscyphus tener (Steph .) Schiffn ., afforded five new naphtho‐γ‐pyrones, rubrofusarin‐6‐O‐α‐D ‐ribofuranoside ( 1 ), (R)‐10‐(3‐succinimidyl)‐TMC‐256A1 ( 2 ), asperpyrone E ( 3 ), isoaurasperone A ( 4 ), and isoaurasperone F ( 5 ), as well as four known ones, dianhydroaurasperone C ( 6 ), aurasperone D ( 7 ), asperpyrone D ( 8 ), and asperpyrone A ( 9 ), together with a cytotoxic cyclic pentapeptide, malformin A₁ ( 10 ). Their structures were determined by extensive spectroscopic analysis. The absolute configurations of dimeric naphtho‐γ‐pyrones 3 – 9 were also determined by analysis of their respective CD spectra.     

Biogeographical Patterns and Phenological Changes in Lapiedra martinezii Lag. Related to Its Alkaloid Diversity

The aim of this work was to investigate the alkaloid patterns of Lapiedra martinezii and their relation to biogeography and phenology focused in a phylogenetic comparison. Plants from 14 populations of L. martinezii, covering almost its entire distribution area, were subjected to morphological, ecological, and phytochemical analysis. Experiments for different alkaloid‐type content are proposed as a new tool for analysis of plant distribution. Several plants were transplanted for weekly observation of their phenological changes, and alkaloids from different plant organs were extracted, listed, and compared. The alkaloid pattern of L. martinezii comprises 49 compounds of homolycorine, lycorine, tazettine, haemantamine, and narciclasine types. The populations located in the north and south margins of the distribution area displayed alkaloid patterns different from those of the central area. Changes in these patterns during their phenological cycle may be related to a better defence for plant reproduction. L. martinezii is an old relict plant, and it has maintained some of the more primitive morphological features and alkaloid profiles of the Mediterranean Amaryllidaceae. The variations in alkaloid content observed could be interpreted in a phylogenetic sense, and those found in their phenological changes, in an adaptive one.     

Phytochemical Investigation of Annulohypoxylon ilanense,an Endophytic Fungus Derived from Cinnamomum Species

Cultivation of the fungal strain Annulohypoxylon ilanense, an endophytic fungus isolated from the wood of medicinal plant Cinnamomum species, resulted in the isolation of one new furanoid derivative, ilanefuranone ( 1 ), one new pyrrole alkaloid, ilanepyrrolal ( 2 ), and one new biarylpropanoid derivative, ilanenoid ( 3 ), together with 22 known compounds, of which one α‐tetralone analog, (?)‐(4R)‐3,4‐dihydro‐4,6‐dihydroxynaphthalen‐1(2H)‐one ( 4 ) was isolated for the first time from a natural source. The structures were elucidated on the basis of physicochemical evidence, in‐depth NMR spectroscopic analysis, and high‐resolution mass spectrometry, and the antimycobacterial activities were also evaluated.     

Quantum Dot Based Heterostructures for Unassisted Photoelectrochemical Hydrogen Generation

TiO₂ hollow nanowires (HNWs) and nanoparticles (NPs) constitute promising architectures for QDs sensitized photoanodes for H₂ generation. We sensitize these structures with CdS/CdSe quantum dots by two different methods (chemical bath deposition, CBD and succesive ionic layer adsorption and reaction, SILAR) and evaluate the performance of these photoelectrodes. Remarkable photocurrents of 4 mA·cm and 8 mA·cm^?2 and hydrogen generation rates of 40 ml·cm^?2·day^?1 and 80 ml·cm^?2·day^?1 have been obtained in a three electrode configuration with sacrificial hole scavengers (Na₂S and Na₂SO₃), for HNWs and NPs respectively, which is confirmed through gas analysis. More importantly, autonomous generation of H₂ (20 ml·cm^?2·day^?1 corresponding to 2 mA·cm^?2 photocurrent) is obtained in a two electrode configuration at short circuit under 100 mW·cm^?2 illumination, clearly showing that these photoanodes can produce hydrogen without the assistance of any external bias. To the best of the authors' knowledge, this is the highest unbiased solar H₂ generation rate reported for these of QDs based heterostructures. Impedance spectroscopy measurements show similar electron density of trap states below the TiO₂ conduction band while the recombination resistance was higher for HNWs, consistently with the much lower surface area compared to NPs. However, the conductivity of both structures is similar, in spite of the one dimensional character of HNWs, which leaves some room for improvement of these nanowired structures. The effect of the QDs deposition method is also evaluated. Both structures show remarkable stability without any appreciable photocurrent loss after 0.5 hour of operation. The findings of this study constitute a relevant step towards the feasibility of hydrogen generation with wide bandgap semiconductors/quantum dots based heterostructures.     

Loss Mechanisms in Thick‐Film Low‐Bandgap Polymer Solar Cells

Polymer bulk heterojunction solar cells based on low bandgap polymer:fullerene blends are promising for next generation low‐cost photovoltaics. While these solution‐processed solar cells are compatible with large‐scale roll‐to‐roll processing, active layers used for typical laboratory‐scale devices are too thin to ensure high manufacturing yields. Furthermore, due to the limited light absorption and optical interference within the thin active layer, the external quantum efficiencies (EQEs) of bulk heterojunction polymer solar cells are severely limited. In order to produce polymer solar cells with high yields, efficient solar cells with a thick active layer must be demonstrated. In this work, the performance of thick‐film solar cells employing the low‐bandgap polymer poly(dithienogermole‐thienopyrrolodione) (PDTG‐TPD) was demonstrated. Power conversion efficiencies over 8.0% were obtained for devices with an active layer thickness of 200 nm, illustrating the potential of this polymer for large‐scale manufacturing. Although an average EQE > 65% was obtained for devices with active layer thicknesses > 200 nm, the cell performance could not be maintained due to a reduction in fill factor. By comparing our results for PDTG‐TPD solar cells with similar P3HT‐based devices, we investigated the loss mechanisms associated with the limited device performance observed for thick‐film low‐bandgap polymer solar cells.