The Performance of Respirators Used in the Treatment of Respiratory Insufficiency

Mechanical ventilators may be required for the treatment of inadequate ventilation, intractable left heart failure and cerebral edema. Each situation requires different ventilator characteristics. The performance of the Blease P3, Engström, Mörch Piston, Bird Mark 7 and 8 and Bennett PR1 and PR2 respirators has been studied. The factors governing choice of respirator in specific clinical situations are described.     

Acidithiobacillus ferrianus sp. nov.: an ancestral extremely acidophilic and facultatively anaerobic chemolithoautotroph

Strain MG, isolated from an acidic pond sediment on the island of Milos (Greece), is proposed as a novel species of ferrous iron- and sulfur-oxidizing Acidithiobacillus. Currently, four of the eight validated species of this genus oxidize ferrous iron, and strain MG shares many key characteristics with these four, including the capacities for catalyzing the oxidative dissolution of pyrite and for anaerobic growth via ferric iron respiration. Strain MG also grows aerobically on hydrogen and anaerobically on hydrogen coupled to ferric iron reduction. While the 16S rRNA genes of the iron-oxidizing Acidi-thiobacillus species (and strain MG) are located in a distinct phylogenetic clade and are closely related (98–99% 16S rRNA gene identity), genomic relatedness indexes (ANI/dDDH) revealed strong genomic divergence between strain MG and all sequenced type strains of the taxon, and placed MG as the first cultured representative of an ancestral phylotype of iron oxidizing acidithiobacilli. Strain MG is proposed as a novel species, Acidithiobacillus ferrianus sp. nov. The type strain is MG^T (= DSM 107098^T = JCM 33084^T). Similar strains have been found as isolates or indicated by cloned 16S rRNA genes from several mineral sulfide mine sites.

     

Acidocella aromatica sp. nov.: an acidophilic heterotrophic alphaproteobacterium with unusual phenotypic traits

Three obligately heterotrophic bacterial isolates were identified as strains of a proposed novel species of extremely acidophilic, mesophilic Alphaproteobacteria, Acidocella aromatica. They utilized a restricted range of organic substrates, which included fructose (but none of the other monosaccharides tested), acetate and several aromatic compounds (benzoate, benzyl alcohol and phenol). No growth was obtained on complex organic substrates, such as yeast extract and tryptone. Tolerance of the proposed type strain of the species (PFBC) to acetic acid was much greater than that typically reported for acidophiles. The bacteria grew aerobically, and catalyzed the dissimilatory reductive dissolution of the ferric iron mineral schwertmannite under both micro-aerobic and anaerobic conditions. Strain PFBC did not grow anaerobically via ferric iron respiration, though it has been reported to grow in co-culture with acid-tolerant sulfidogenic bacteria under strictly anoxic conditions. Tolerance of strains of Acidocella aromatica to nickel were about two orders of magnitude greater than those of other Acidocella spp., though similar levels of tolerance to other metals tested was observed. The use of this novel acidophile in solid media designed to promote the isolation and growth of other (aerobic and anaerobic) acidophilic heterotrophs is discussed.     

Assessing the efficacy of spray-delivered ‘eco-friendly’ chemicals for the control and eradication of marine fouling pests

Despite its frequent use in terrestrial and freshwater systems, there is a lack of published experimental research examining the effectiveness of spray-delivered chemicals for the management of non-indigenous and/or unwanted pests in marine habitats. This study tested the efficacy of spraying acetic acid, hydrated lime and sodium hypochlorite for the control of marine fouling assemblages. The chemicals are considered relatively ‘eco-friendly’ due to their low toxicity and reduced environmental persistence compared to synthetic biocides, and they were effective in controlling a wide range of organisms. Pilot trials highlighted acetic acid as the most effective chemical at removing fouling cover, therefore it was selected for more comprehensive full-scale trials. A single spray of 5% acetic acid with an exposure time of 1 min effectively removed up to 55% of the invertebrate species present and 65% of the cover on fouled experimental plates, while one application of 10% acetic acid over 30 min removed up to 78% of species present and 95% of cover. Single-spray treatments of 5% acetic acid reduced cover of the tunicate pest species Didemnum vexillum by up to 100% depending on the exposure duration, while repeat-spraying ensured that even short exposure times (1 min) achieved ～99% mortality. Both 5 and 10% acetic acid solutions appeared equally effective at removing the majority of algal species. This technique could be used for controlling the introduction of unwanted species or preventing the spread of pests, and is applicable to use on a variety of natural and artificial substrata, or for the treatment of structures that can be removed from the water.     

The effectiveness of rotating brush devices for management of vessel hull fouling

The present study tested two diver-operated rotating brush systems, coupled with suction and collection capabilities, to determine their efficacy in the management of vessel biofouling. Both rotating brush systems proved effective (>80%) in removing low-to-moderate levels of fouling from flat and curved experimental surfaces (Perspex plates). However, performance was generally poorer at removing more advanced levels of fouling. In particular, mature calcareous organisms were relatively resistant to the rotating brushes, with a high proportion (up to 50%) remaining on plates following treatment. On average, >95% of defouled material was collected and retained by both systems. The amount of lost material generally increased when treating curved plates with increasing biomass, whereas the material lost from flat plates was typically less and remained relatively constant throughout the trials. The majority (>80%) of fouling not captured by the systems was crushed by the brushes (ie non-viable). However, a diverse range of viable organisms (eg barnacles and hydroids) was lost to the environment during the defouling trials. When defouling a vessel, unintentional detachment of fouling organisms is likely to be high through physical disturbance by divers operating the devices and by associated equipment (eg hoses). Furthermore, residual biosecurity risks are also likely to remain due to diver error, persistent fouling remaining on treated surfaces and the inaccessibility of niche areas to the brush systems. To address these limitations, further research into alternative treatment methods is required.     

Oxidation and Reduction of Iron by Acidophilic Bacteria

Abstract

Redox reactions of iron in acidic environments are of economic and environmental significance, for example, for the leaching of metal ores and for the formation of acid mine drainage and acid sulfate soils. Until recently, research on microbial iron metabolism in acidic environments has mainly been focused on the role of aerobic, autotrophic ferrous iron‐oxidizing bacteria. In the present paper, recent new developments in the field of acidophilic iron metabolism are reviewed. In addition to the well‐known autotrophic ferrous iron‐oxidizing organisms, new heterotrophic isolates have been described that are capable of oxidizing ferrous iron. Microorganisms can also play an important role in the reductive part of the iron cycle. Both heterotrophic and autotrophic organisms may also be involved in this process. The contribution of heterotrophic organisms to acidophilic iron cycling can be twofold: In addition to their direct role as a catalyst, these organisms may scavenge organic compounds that inhibit their autotrophic counterparts. Detailed studies of acidophilic ecosystems are needed to assess the significance of the various types of microorganisms for the overall rate of iron cycling in these extreme environments.     

Hooked on fat: the role of lipid synthesis in cancer metabolism and tumour development

An increased rate of lipid synthesis in cancerous tissues has long been recognised as an important aspect of the rewired metabolism of transformed cells. However, the contribution of lipids to cellular transformation, tumour development and tumour progression, as well as their potential role in facilitating the spread of cancerous cells to secondary sites, are not yet fully understood. In this article, we review the recent findings that support the importance of lipid synthesis and metabolism in tumorigenesis. Specifically, we explore the role of aberrant lipid biosynthesis in cancer cell migration and invasion, and in the induction of tumour angiogenesis. These processes are crucial for the dissemination of tumour cells and formation of metastases, which constitute the main cause of cancer mortality.